• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.47.3-47.3
• /
• 2019

We discovered 722 open clusters within 1 kpc using Gaia DR2 data. These clusters are detected in the proper motion space and confirmed on the spatial distribution with parallax information. We divided the 3628 regions and visually searched using python program. Among 722 open clusters, 430 clusters are previously unknown clusters. Catalogue of discovered clusters is unloaded on the online catalogue at https://radio.kasi.re.kr/project/shlee/. Owing to the good membership criteria, we could see the halo structure of the clusters. In that reason, the average size of the discovered cluster is about 9 times than that of previously known clusters.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.2
• /
• pp.153-156
• /
• 1991

Three humic acids, two from uranium bearing coal shale and one from the neighbouring limey shale region, are extracted from soils by dissolution in 0.1 M NaOH followed by acid precipitation. After purification cycles, they are characterized for their elemental composition, contents of inorganic impurities, molecular size distribution and proton exchange capacities. The results are compared with the data of reference and aquatic humic acids characterized under the project MIRAGE Ⅱ at TUM and also with other literature data. The proton exchange capacity determined by direct titration, is found to be 3.60 and 2.01 meq/g for coal shale and limey shale humic acids, respectively.

• Design & Manufacturing
• /
• v.14 no.4
• /
• pp.1-10
• /
• 2020

The seal plays a role in preventing oil leakage when the lip and the rotating shaft come into contact with the fluid and air pressure. Recently, micro dimples or micro pockets are processed and used on the lubrication surfaces of thrust bearings, mechanical bearings, and piston rings. Compared to a smooth surface, micro dimples reduce friction and increase the life of parts. This paper analyzed various kinds of micro dimple shapes on the sealing surface, i.e. circle, rectangle, triangle, and trapezoid. For this purpose, Introduced the design of experiments to work out a micro dimple configuration, unlikely to be damaged from cracks and low in contact stress. As a result, the triangular dimple showed the best results. Optimal factors were dimple size 0.15 mm, dimple depth 0.0383 mm, dimple density 40%, and the maximum equivalent stress was 9.1455 MPa, and the maximum contact pressure was 9.6612 MPa. This paper analyzed the optimal shape of dimples by finite element analysis. As a research project, experiments and comparative analysis of micro dimple shapes are needed.

• Food Science and Industry
• /
• v.54 no.1
• /
• pp.2-10
• /
• 2021

Microplastics with a size of less than 5 mm have emerged as an important environmental and food safety issue, as they have been detected not only in marine but also in terrestrial ecosystem and drinking water. Although many studies have been conducted on the exposure of microplastics and the effects on human health, the lack of standardized experimental methods for microplastics has been reviewed as a major problem. In order to overcome this, European countries such as the Netherlands and Germany are conducting a project to develop detection methods for microplastics as well as to establish the risk assessment methodologies for microplastics. Being the microplastics suggested to have a substantially potential risk on human health, reliable risk assessments should be conducted considering the various sources of microplastics, chemical pollutants and biological factors. In addition, international standards and regulations should be applied.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.438-442
• /
• 1996

The design of the vacuum vessel of KT-2(a large-aspect-ratio, mid-size tokamak) is presented. The KT-2 vacuum vessel provides necessary environments to contain a plasma of double-null configuration with elongation of up to 1.8. The vacuum vessel is designed as an all-metal welded structure. Eddy currents are induced on the vessel during all stages of the plasma operation. Influences of the continuous vessel on the plasma were investigated. No significant effect of the vessel on the plasma in every aspect of null formation, plasma initiation, plasma control was found. Stresses and deformations in the vessel by atmospheric pressure and electromagnetic forces due to the eddy currents were calculated using 3D FEM code.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1128-1133
• /
• 2009

Recently super complex culture shopping facility development seeks consumer' convenience present and are coming restaurant neighborhood, cinema, shopping, hotel etc, according to intensive plan. Such as complex culture shopping facility was developed to most subway station area center and have concept that is space for a main facilities or space for environment protection, citizens' a rest in city. Howeve,r space of recently domestic large size complex culture shopping facility that do not plan systematically was lacking and caused result that do not use efficiently space. Limited extent of research that define complex culture shopping equipment and analyze form of space and present space planning with analysis of research connected with complex usage development.

• Journal of the Korean earth science society
• /
• v.44 no.4
• /
• pp.264-274
• /
• 2023

The Korea Strait comprises a continental shelf in a shallow sea that experienced glacio-eustastic sea-level changes during the Quaternary period. A long core of 76.6 m in length was acquired at the South Sea Drilling Project site (SSDP-101; 34°19.666'E and 128°16.335'N) with a 60 m water deep. The uppermost massive sand beds were interpreted as sandy sediments of the nearshore marine sand ridge in the shallow sea during the transgression of sea level, whereas the lower parts of alternating sandy and muddy beds were interpreted as deposits in marsh, estuary, and tidal flat environments. A three-layered geoacoustic model was reconstructed for the sedimentary succession in the high-resolution seismic profile based on a 140-grain size and sediment type of core SSDP-101. For the actual underwater simulation and experiments, the in-situ P-wave speeds were calculated using the sound speed ratio of the Hamilton method.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.424-428
• /
• 2005

As the application of NPM in waste administration branch this paper proposes a new waste management method in order to increase the efficiency of resources and reduce the quantity of waste. First the matrix method is suggested which comprehensively consider and integrate the proposals of different government departments. Moreover the inhabitant's attitude toward the new waste management measures was investigated. Based on the investigation the evaluation function was made, which include three elements: necessary budget, the effect of cost decrease and the environmental burden decrease. The optimal method of budget allocation to maximize social welfare is proposed under the condition of limited budget by the evaluation function. By applying this system further local governments will be able to determine their adequate service level and budget size.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.361-369
• /
• 2022

Unsafe actions and behaviors of workers cause most accidents at construction sites. Nowadays, occupational safety is a top priority at construction sites. However, this problem often requires money and effort from investors or construction owners. Therefore, decreasing the accidents rates of workers and saving monitoring costs for contractors is necessary at construction sites. This study proposes an unsafe behavior detection method based on a skeleton model to classify three common unsafe behaviors on the scaffold: climbing, jumping, and running. First, the OpenPose method is used to obtain the workers' key points. Second, all skeleton datasets are aggregated from the temporary size. Third, the key point dataset becomes the input of the action classification model. The method is effective, with an accuracy rate of 89.6% precision and 90.5% recall of unsafe actions correctly detected in the experiment.

• Health Policy and Management
• /
• v.1 no.1
• /
• pp.136-152
• /
• 1991

The study was conducted to project supply and demand of the physicians from year 1991 to year 2010 based on the analysis of supply and demand of the physicians up to year 1989. Results of the study will provide information for the physicians manpower planning of the 7th 5-year Economic Social Development Planning(1992-1996) and contribute to the overall health manpower planning for the 21the century. It is projected that physician will be oversupplied from the very near future based on the current productivity or underestimated based on the optimal productivity. Thus, it is desirable not to change size of training and education during the 7the 5-year planning period and re-examine the status of the physician manpower at the end of the 7th 5-year period taking into consideration medical services utilization pattern, patients' satisfaction, and physicians' productivity.