• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.487-493
• /
• 2004

This paper consider a six sigma project for improving the TIP life time in a spot welding process. The project follows a disciplined process of five phases: define, measure, analyze, improve, and control. A process map is used to identify process input and output variables. Nine key process input variables are selected by using C&E matrix and FMEA, and finally four vital few input variables are selected from analyze phase. The optimum process conditions of the four vital few input variables are jointly obtained by maximizing TIP life time using DOE.

• Spatial Information Research
• /
• 제5권1호
• /
• pp.61-75
• /
• 1997

National Geographic Information System(NGIS) should be designed on the assumption that geographic data collected by each national organization should be integrated into geographic database systemically. To achieve this object, NGIS database would be better connected to National Very High-Speed Communication Network. In the process of research, some problems related to Korean NGIS are found. These are standardization, compatibility, extension, issue of making and opening digital map, and issue related to land information. So, it is required that pilot project apply National Geographic Information System in terms of National Very High-Speed computer network project. This project is to contain two main theme building of physical network and special management of network which is related with NGIS.

• 품질경영학회지
• /
• 제33권1호
• /
• pp.88-98
• /
• 2005

This paper considers a six sigma project for improving the TIP life time in a spot welding process. The project follows a disciplined process of five phases: define, measure, analyze, improve, and control. A process map is used to identify process input and output variables. Nine key process input variables are selected by using C&E matrix and FMEA, and finally four vital few input variables are selected from analyze phase. The optimum process conditions of the vital few input variables are jointly obtained by maximizing TIP life time using DOE and alternative selection method.

• 산업경영시스템학회지
• /
• 제29권1호
• /
• pp.9-17
• /
• 2006

This paper considers a six sigma project for improving productivity of the brace complement center pillar. The project follows a disciplined process of fife phases: define, measure, analyze, improve, and control. A process map is used to identify process input and output variables. Eleven key process input variables are selected by using X&Y matrix and FMEA, and finally eight vital few input variables are selected from analyze phase. The optimum process conditions of the vital few input variables are jointly obtained by maximizing productivity of the brace complement center pillar using DOE and alternative selection method.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.433-439
• /
• 2020

As eco-friendly and sustainable architecture is becoming more popular, the interest in Korean traditional wooden buildings (Hanok) has also been increasing. The building technologies of the wooden construction have been actively developed in all over the world through the diversification of new materials and construction methods. On the other hand, the growth rate of wooden construction market is still slow in Korea. In an attempt to promote the Korean traditional wooden buildings, a comprehensive research project has been conducted. This R&D project is developing standard designs, new materials, and methods for modernized Hanok including houses, public buildings, long-span structures, and even high-rise buildings. To this end, the purpose of this study is to formulate a technological strategy for popularization of modernized Hanok. Influencing variables and issues are analyzed and defined first. At the same time, the five keywords have examined in the perspective of dissemination of modernized Hanok technology. Finally, a technology road map for strategic development of modernized Hanok is proposed through casual diagrams.

• 유기물자원화
• /
• 제23권1호
• /
• pp.63-69
• /
• 2015

본 연구는 포항철강산업단지를 대상으로 부산물 발생 현황과 현재까지 구축된 산업공생 네트워크를 분석하는데 목적을 두었다. 포항은 경상북도 시군 중 사업장 폐기물 발생량과 재활용 제외 폐기물 발생량이 모두 가장 높았으며, 대부분이 포항철강산업단지에서 발행하였다. 부산물 발생량을 조사한 결과 재활용을 제외한 폐기물 발생량의 대부분은 광재류가 차지하고 있으며 폐목재류, 분진류, 폐합성수지, 폐합성고무의 순으로 나타났다. 포항철강산업단지 입주기업간 구축된 부산물 거래 공생맵을 작성한 결과 부산물 중 폐내 화물 및 슬래그를 이용한 부산물 거래가 가장 활발하게 이루어지는 것으로 나타났다.

• Spatial Information Research
• /
• 제6권1호
• /
• pp.103-120
• /
• 1998

국가 GIS구축 기본계획에 따르면 1998년부터 2000년까지 지형지번도, 행정구역도, 토지이용현황도, 도로망도, 국토이용계획도, 도시계획도 등 6개 주제도를 수치지도화대상으로 선정하여 우선적으로 수치지도화사업을 추진하는 것으로 되어 있다. 수치지도 제작사업을 추진하기 위해서는 먼저 그에 대한 표준품셈과 제작지침이 마련되어야 한다. 그러나 아직 주제도에 대한 표준품셈이 완전하게 확정되지 않았고, 제작지침도 마련되어 있지 않다. 따라서 이 논문에서는 첫째 6개 주제도를 수치지도화하기 위한 방법을 다각도로 살펴보고 각 주제도별로 가장 바람직한 제작방법을 제시하였다. 둘째 이렇게 제시된 주제도 제작방법과 절차에 따라 안양시 동안구를 대상지역으로 하여 실제로 수치지도를 실험 제작하고 그 결과를 제시하였다. 이 연구결과는 정부가 주제도 제작지침과 주제도 제작사업 추진방안을 마련하는데 골격자료로 활용되었다.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.77-81
• /
• 2015

The unit price contracting is the standard contracting method for highway projects in the U.S. As a result, state highway agencies have collected a large amount of historical bid data that they can use to determine engineer's estimates for future projects. The estimator must carefully consider various characteristics of a new project such as its location to determine an engineer's estimate as accurate as possible before bid letting. Higher cost estimates can result in the loss of the available budget and lower cost estimates may lead to deferral and delay of projects. The study uses the historical bid data obtained from Iowa Department of Transportation and develops a Geographic Information System (GIS) tool to visually show the variation of unit prices over the map using a spatial interpolation technique. The interpolation map can be used to estimate the unit price of the item at any location across Iowa. This noble method allows the estimator to effectively and fully utilize the historical bid data in a very time efficient manner and determine more accurate cost estimation.

• 한국정보통신학회논문지
• /
• 제15권3호
• /
• pp.501-509
• /
• 2011

본 논문은 국가 정보통신(IT)분야 연구개발(R&D)사업에 대한 전략과제를 선정하기 위한 모형을 제시한 것으로 우리나라 정부의 New IT R&D정책인 Smile-curve에 맞는 전략과제 선정을 위해 포트폴리오 모형을 적용하였으며, 포트폴리오 모형 중에서 정부정책의 효과적 반영을 위해 일반적인 R-R(Risk-Return) 포트폴리오 모형을 국가 R&D 체계에 맞게 개발 적용하였다. 또한, R-R 포트폴리오 모형의 평가항목 중 평가항목의 객관성 확보를 위해 TRM(기술로드맵)과 TLS(기술수준조사)자료의 항목을 사용하였으며, AHP(계층화분석)를 통하여 국가전략성, 시장성, 기술성 등 평가항목별 가중치를 설정함으로써 국가 R&D전략과의 연계성을 강화하였다. 또한, 본 모형을 국가 IT R&D 전략과제 선정에 적용한 결과 의미 있는 검증값이 나왔으며, 사업선정단계에서부터 사업의 불확실성을 줄이고 성공률을 높이는 전략과제를 선정하는데 기여하고자 한다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.295-299
• /
• 2007

Today, ubiquitous technology (e.g. computers or networked devices pervade everywhere we are) has enlarged by great advancement of information and communication technologies. If ubiquitous technologies is applied to, innovation of spatial information technology is expected. traditional spatial information technologies such as survey, GIS, GPS, LBS, and RS and ubiquitous technology gradual1y have been converged. The aim of this study is to create shared visions in spatial information technologies by scenario based roadmapping. So, we surveyed the state of the art in main spatial information technologies, market status and patent map. Consequently, prospects of spatial information technologies is suggested. The aim of 1st and 2nd NGIS project focused on map supplier was to develop digital map(e.g. framework data, various thematic map). As a result, the best technology of digital mapping is achieved in the world. But, there is not enough to develop GIS and LBS solution. Current market in GIS S/W and Telematics is about 384billon won and 250billion won. a patent is applied in the order, like a USA(1571case, 47%), Japan(883case, 26%), EU(478case, 14%), Korea(446case, 13%). In the future, spatial information technology fused on ubiquitous technology will be focused on user's demand and developing convenience context. The developing target will be realtime monitoring of 3D spatial data based on high resolution coordinate system, sharing and supplying multi-sensor data considered users demand, location service by ubiquitous technologies.