• Journal of Forest and Environmental Science
• /
• v.34 no.6
• /
• pp.461-471
• /
• 2018

In this study, the deforestation and forest degradation areas have been obtained in Myanmar using a land cover lamp (LCM) and a tree cover map (TCM) to get the $CO_2$ potential reduction and the strength of occurrence was evaluated by using the geostatistical technique. By applying a multiple criteria decision-making method to the regions having high strength of occurrence for the $CO_2$ potential reduction for the deforestation and forest degradation areas, the priority was selected for candidate lands for REDD+ project. The areas of deforestation and forest degradation were 609,690ha and 43,515ha each from 2010 to 2015. By township, Mong Kung had the highest among the area of deforestation with 3,069ha while Thlangtlang had the highest in the area of forest degradation with 9,213 ha. The number of $CO_2$ potential reduction hotspot areas among the deforestation areas was 15, taking up the $CO_2$ potential reduction of 192,000 ton in average, which is 6 times higher than that of all target areas. Especially, the township of Hsipaw inside the Shan region had a $CO_2$ potential reduction of about 772,000 tons, the largest reduction potential among the hotpot areas. There were many $CO_2$ potential reduction hot spot areas among the forest degradation area in the eastern part of the target region and has the $CO_2$ potential reduction of 1,164,000 tons, which was 27 times higher than that of the total area. AHP importance analysis showed that the topographic characteristic was 0.41 (0.40 for height from surface, 0.29 for the slope and 0.31 for the distance from water area) while the geographical characteristic was 0.59 (0.56 for the distance from road, 0.56 for the distance from settlement area and 0.19 for the distance from Capital). Yawunghwe, Kalaw, and Hsi Hseng were selected as the preferred locations for the REDD+ candidate region for the deforestation area while Einme, Tiddim, and Falam were selected as the preferred locations for the forest degradation area.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.869-875
• /
• 2009

Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

• Journal of the Daesoon Academy of Sciences
• /
• v.26
• /
• pp.215-253
• /
• 2016

In 2007, according to the records, I made an on-the-spot survey of the place where Doju Cho Jeongsan and his family might have lived in exile in Manchuria and released a paper in which I decided that the site could be the Shuidongchun (village) of Luotongshanzhen in Liuhexian, Jilin Province. Thereafter, sponsored by the Doju Cho Jeongsan's Memorial Project from 2008 to 2013, many times, I carried out the field investigations and researches on Liuhexian, including the visits of the institutions which have the historical documents, in order to find the data related to the participation of him and his family in the anti-Japanese movement. I was, hence, able to reconfirm that the village had been the place of their exile, based on my collected data and the oral reports which the local historians and ethnic Korean elders had provided. In this study, using the historical documents and maps and the oral materials, I made an attempt to prove the historical truth thoroughly once again. First, the existing sources of Doju Cho and his family's settling in Manchuria from March 1909 to 1917, were carefully analyzed which were described in The Jin-gyeong. In doing so, the misspelling of the names and the spatio-temporal errors of the people's activities were corrected. Next, I researched on another town, Shuitungou of Liuhexian in Fengtian Province (in West Gando of Manchuria), which it is known that Doju and his family stayed in, and the Laogushan (mountain), which it is believed that Doju cultivated himself in. Finally, through the attempt, I reached the conclusion that Doju and his family had settled at Shuidongchun (once called Shuidonggou or Shuitongchun) of Luotongshanzhen (once called Datonggou) in Liuhexian, Jilin Province. In the Liuhexian-related documents and maps published in the eras of Republican China and Manchuria, the place name called Shuitungou was not found. However, I discovered a map in the era of Republican China on which Shuitongchun was recorded as Shuidonggou. In addition, considering the administration system of Republic China, tun(屯) and gou(溝) could not be used together in the place names. Accordingly, Shuitungou was more likely misspelled as Korean people in those days mispronounced Shuidonggou. Furthermore, people in China has habitually called the Dagushan(大孤山), located in the north of Gushanzizhen of Liuhexian, as the Laogushan(老孤山). This means that the Korean people who lived in the area then perhaps recorded the mountain as the Nogosan(老姑山), the mountain of the old goddess, according to Korean enunciation, because they had the custom of worshipping the mountain goddess. I tried my best to find the historical documents regarding Doju and his family's anti-Japanese activities to prove the location of exile in which they settled in northeastern China (Manchuria). However, I was not able to reach the initial goal completely due to the shortage of objective evidences, only to leave tasks to be solved. I hope that this study can give a little help to researchers who are interested in this matter.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.265-278
• /
• 2022

The global energy paradigm is rapidly changing by centering on carbon neutrality, and wind energy is positioning itself as a leader in renewable energy-based power sources. The success of onshore and offshore wind energy projects focuses on securing the economic feasibility of the project, which depends on securing high-quality wind resources and optimal arrangement of wind turbines. In the process of constructing the wind farm, the optimal arrangement method of wind turbines considering the main wind direction is important, and this is related to minimizing the wake effect caused by the fluid passing through the structure located on the windward side. The accuracy of the predictability of the wake effect is determined by the wake model and modeling technique that can properly simulate it. Therefore, in this paper, using WindSim, a commercial CFD model, the wake diffusion pattern is analyzed through the sensitivity study of each wake model of the proposed onshore wind farm located in the mountainous complex terrain in South Korea, and it is intended to be used as basic research data for wind energy projects in complex terrain in the future.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.125-143
• /
• 2018

The study consisted of a survey of the residential satisfaction level of the 3rd grade students and a survey of accessibility from farms for practical field training to public facilities. According to the geographical location of the farms on the map, the average distance to facilities related to convenience or safety and health that students complained was about 12km. And that to social and public facilities was about 4.4km. Students pointed out the convenience of using transportation, commercial and convenient facilities, and the safety of anti-crime security facilities as complaints during the practice session. Residential satisfaction levels in five realms, such as facility and structure, convenience, safety, comfort and sociality, were not all reached at the satisfaction level. In particular, the satisfaction level of female students was sub-normal in the safety and convenience realms. The average satisfaction levels reviewed by department were sub-normal for horse industry and floriculture departments. By residential patterns, satisfaction with sharing with the farmers was higher than with other patterns. And satisfaction level by housing structure was much lower in the assembly and container structures Since residential satisfaction level is determined by the inside and outside environment of the dwelling, college should provide students with accurate and vivid data using information communication technologies.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.175-190
• /
• 2018

Recently, policy of the marine advanced countries were switched from the preemption using ocean to post-project development. In this study, we suggest improvement and the pending issues when are deducted to the database of the marine spatial information is constructed over the GIS system for the Korean Marine Spatial Planning (KMSP). More than 250 spatial information in the seas of Korea were processed in order of data collection, GIS transformation, data analysis and processing, data grouping, and space mapping. It's process had some problem occurred to error of coordinate system, digitizing process for lack of the spatial information, performed by overlapping for the original marine spatial information, and so on. Moreover, solution is needed to data processing methods excluding personal information which is necessary when produce the spatial data for analysis of the used marine status and minimized method for different between the spatial information based GIS system and the based real information. Therefore, collection and securing system of lacking marine spatial information is enhanced for marine spatial planning. it is necessary to link and expand marine fisheries survey system. It is needed to the marine spatial planning. The marine spatial planning is required to the evaluation index of marine spatial and detailed marine spatial map. In addition, Marine spatial planning is needed to standard guideline and system of quality management. This standard guideline generate to phase for production, processing, analysis, and utilization. Also, the quality management system improve for the information quality of marine spatial information. Finally, we suggest necessity need for the depths study which is considered as opening extension of the marine spatial information and deduction on application model.

• Journal of Korea Water Resources Association
• /
• v.56 no.3
• /
• pp.195-210
• /
• 2023

Additional deposition and erosion in large rivers in South Korea have continued to occur toward morphological stabilization after massive dredging through the four major river restoration project, subsequently requiring precise bathymetry monitoring. Hyperspectral bathymetry method has increasingly been highlighted as an alternative way to estimate bathymetry with high spatial resolution in shallow depth for replacing classical intrusive direct measurement techniques. This study introduced the conventional Optimal Band Ratio Analysis (OBRA) of hyperspectral bathymetry method, and evaluated the performance in a domestic large river in normal turbid and flow condition. Maximum measurable depth was estimated by applying correlation coefficient and root mean square error (RMSE) produced during OBRA with cascadedly applying cut-off depth, where the consequent hyperspectral bathymetry map excluded the region over the derived maximum measurable depth. Also non-linearity was considered in building relation between optimal band and depth. We applied the method to the Nakdong and Hwang River confluence as a large river case and obtained the following features. First, the hyperspectal method showed acceptable performance in morphological mapping for shallow regions, where the maximum measurable depth was 2.5 m and 1.25 m in the Nakdong and Hwang river, respectively. Second, RMSE was more feasible to derive the maximum measurable depth rather than the conventional correlation coefficient whereby considering various scenario of excluding range of in situ depths for OBRA. Third, highly turbid region in Hwang River did not allow hyperspectral bathymetry mapping compared with the case of adjacent Nakdong River, where maximum measurable depth was down to half in Hwang River.

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.163-194
• /
• 2013

This study aims at giving examples that can be applied in the real education field, and it develops theme-based integrative education program for Industrial Specialized high school students. It analyzed the models of many scholars about the development of education course, and devised developmental models and procedures of the theme-based integrative education program of engineering specialized high school from those. As a result, it used and reorganized ADDIE model which is the systematic education course development model and the theme-based integrative education development model of Frazee and Rudnitski(1995) as the basic structure, and came to devise theme-based integrative education program of engineering specialized high school while referring to creative engineering design education program development model by Lee Chang-hoon. This study that is theme-based integrative education program for engineering-specialized high school students and is the result of this study has the following characters. First, This theme-based integrative education program that is developed for engineering-specialized high school students can be applied and the initial example that approach the Theme-Based. Second, This Education Program included the Activity project that is "Making Maglev" for the third grade at the engineering-specialized high school and One of the Program's aim is to bring up their attitude that engaged to in the class having the Interest. Third, Theme-based integrative education program for engineering-specialized high school is composed the workbook for the students and the teaching guidance plan for the teachers. Workbook for the students is composed four Units;"Brief about the Maglev","Basic principles about the Maglev","Intensive principles about the Maglev", Activity project about the Maglev". And each unit is made by Learning Purpose, Introducing, Learning Contents(Deepen Learning, Reading Magazines), Assesment etc. Teaching guidance plan for the teachers include that Summary, Purpose, Time Planing & Streaming Map for the class, contents associated Maglev, prerequisite learning, constructure of the education program, flow chart, learning activity, assesment(self-appraiser and peer review).

• Conservation Science in Museum
• /
• v.19
• /
• pp.1-18
• /
• 2018

The Stele for National Preceptor Hongbeop from the Jeongtosa Temple site in Chungju is one of the most important stone cultural heritage items for exemplifying the style of the Goryeo era. Despite its obvious value, this relic has been stored in a weathered condition at the National Museum of Korea. It had suffered various dismantling and displacements during the Japanese colonial period and had long been exposed in the open air. The stele was selected as a subject for the Stone Monuments Restoration Project launched by the National Museum of Korea in 2015. In preparation for its outdoor exhibition as part of the restoration project, this study investigated the characteristics of its materials, produced a map of its deterioration from weathering, and carried out ultrasonic analysis of the materials to provide findings useful for conservation treatment. The materials analysis revealed that the turtle-shaped pedestal of the stele was made from two-mica granite consisting of medium-grained quartz, plagioclase, alkali feldspar, biotite, and muscovite. Its body stone is crystalline marble, the rock-forming mineral in which is medium-grained calcite in a rose-pink color with dark grey spots. The dragon top of the stele is made of crystalline marble, the major component of which is medium-grained calcite of a light-grey color. The deterioration consists of 21.5% abrasion on the stone body, with its south face most damaged, and 18.6% granular disintegration, with the north face most damaged. The ultrasonic material characterization conducted for mapping the general condition of weathering shows low values on the parts-assembly area of the turtle-shaped pedestal and on the upper portion of the stone body. It is considered that there is dislocation due to partial blistering and fracturing as well as to the differences in surface treatment. Prior to the outdoor exhibition of the stele, the surface was cleaned of contaminants and was consolidated based on the scientific investigation in order to prevent weathering from the external environment.

• 한국균학회소식:학술대회논문집
• /
• 2018.05a
• /
• pp.27-27
• /
• 2018

The production scale of mushroom cultivation in Korea is approximately 600 billion won, which is 1.6% of the Korean gross agricultural output. Annually, ca. 190,000 tons of mushrooms are harvested in Korea. Although the numbers of mushroom farms and cultivators are constantly decreasing, the total mushroom yields are increasing due to the large-scale cultivation facilities and automation. The recent expansion of the well-being trend causes increase in mushroom consumption in Korea: annual per capita consumption of mushroom was 3.9kg ('13) that is a little higher than European's average. Thus the exports of mushrooms, mainly Flammulina velutipes and Pleurotus ostreatus, have been increased since the middle of 2000s. Recently, however, it is slightly reduced. However, Vietnam, Hong Kong, the United States, the Netherlands and continued to export, and the country has increased recently been exported to Australia, Canada, Southeast Asia and so on. Canned foods of Agaricus bisporus was the first exports of the Korean mushroom industry. This business has reached the peak of the sale in 1977-1978. As Korea initiated trade with China in 1980, the international prices of mushrooms were sharply fall that led to shrink the domestic markets. According to the high demand to develop new items to substitute for A. bisporus, oyster mushroom (Pleurotus ostreatus) was received the attention since it seems to suit the taste of Korean consumers. Although log cultivation technique was developed in the early 1970s for oyster mushroom, this method requires a great deal of labor. Thus we developed shelf cultivation technique which is easier to manage and allows the mass production. In this technique, the growing shelf is manly made from fermented rice straw, that is the unique P. ostreatus medium in the world, was used only in South Korea. After then, the use of cotton wastes as an additional material of medium, the productivity. Currently it is developing a standard cultivation techniques and environmental control system that can stably produce mushrooms throughout the year. The increase of oyster mushroom production may activate the domestic market and contribute to the industrial development. In addition, oyster mushroom production technology has a role in forming the basis of the development of bottle cultivation. Developed mushroom cultivation technology using bottles made possible the mass production. In particular, bottle cultivation method using a liquid spawn can be an opportunity to export the F.velutipes and P.eryngii. In addition, the white varieties of F.velutipes were second developed in the world after Japan. We also developed the new A.bisporus cultivar "Sae-ah" that is easy to grown in Korea. To lead the mushroom industry, we will continue to develop the cultivars with an international competitive power and to improve the cultivation techniques. Mushroom research in Korea nowadays focuses on analysis of mushroom genetics in combination with development of new mushroom varieties, mushroom physiology and cultivation. Further studied are environmental factors for cultivation, disease control, development and utilization of mushroom substrate resources, post-harvest management and improvement of marketable traits. Finally, the RDA manages the collection, classification, identification and preservation of mushroom resources. To keep up with the increasing application of biotechnology in agricultural research the genome project of various mushrooms and the draft of the genetic map has just been completed. A broad range of future studies based on this project is anticipated. The mushroom industry in Korea continually grows and its productivity rapidly increases through the development of new mushrooms cultivars and automated plastic bottle cultivation. Consumption of medicinal mushrooms like Ganoderma lucidum and Phellinus linteus is also increasing strongly. Recently, business of edible and medicinal mushrooms was suffering under over-production and problems in distribution. Fortunately, expansion of the mushroom export helped ease the negative effects for the mushroom industry.