• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.13-18
• /
• 2009

Partial discharge measurements in cryogenic dielectric materials of HTS transformer are very important because partial discharge was regarded as primary source for ageing and breakdown of cryogenic materials. But, partial discharge measurement techniques and its effects in low temperature high voltage environments were not suggested and there exist only a few reports on this research fields. Therefore, in order to implement reliable HTS transformers, partial discharge diagnosis techniques for cryogenic materials of HTS transformers were investigated using partial discharge (PD) pattern analysis methods. In this works, four different types of artificial defects including turn to turn insulation, free moving particle, void and protrusion, have been fabricated since it was commonly regarded that they might cause the sudden service failures of the power apparatus. For this purpose, these defects are installed into the dielectric materials in liquid nitrogen and experimental investigations have been carried out for the diagnosis of HTS transformer. And various PD patterns caused by the amount of quench of superconductors were analyzed. Throughout this works, the different PD patterns in cryogenic dielectric materials in liquid nitrogen, and PD measuring technique could be the fundamental steps to establish diagnosis technologies of HTS transformer for power applications.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.691-696
• /
• 2015

소프트웨어 결함에 대한 관심이 높아지고 있다. 기업은 소프트웨어를 개발하는 조직, 고객대응 조직, 품질관리 조직 등 다양한 방법과 채널을 이용하여 개선을 위한 노력을 하고 있다. 이렇게 수집된 결함 데이터 들을 그 조건과 용도에 맞게 분석하여 소프트웨어 결함을 최소화하고 나아가 제품품질 향상에 기여할 수 있다. 본 연구에서 기업용 소프트웨어의 결함 추이를 테스트 성숙도 모델을 기반으로 분석하여 결함 예방 프로세스를 수립하고 프로젝트에 적용하여 106개의 결함이 16개로 감소하였다. 본 연구는 소프트웨어 품질활동 중 기본이 되는 기존결함에 관심을 가짐으로서 최소한의 자원을 활용하여 소프트웨어 제품 품질을 개선할 수 있는 방안을 제시하는데 의의를 가진다.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.116-122
• /
• 2009

We introduce a measurement method that enables to measure the penetration depth($\lambda$) of superconductor films by using a short-ended parallel plate sapphire resonator. Variations in the $\lambda$ of $MgB_2$ films could be measured down to the lowest temperature using a sapphire resonator with a $YBa_2Cu_3O_{7-x}$ film at the bottom. A model equation of $\lambda=\lambda_0[1-(T/T_c)^{\tau}]^{-1/2}$ for $MgB_2$ films appeared to describe the observed variations of the resonant frequency of the sapphire resonator with temperature, with $\lambda_0,\;\tau$, and $T_C$ used as the fitting parameters.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권4호
• /
• pp.5-8
• /
• 2016

We report on the fabrication and measurement results of the electrical transport properties of superconductor-normal metal-superconductor (SNS) weak links, made of PbIn superconductor and Au metal. The maximum supercurrent reaches up to ${\sim}6{\mu}A$ at T = 2.3 K and the supercurrent persists even at T = 4.7 K. Magnetic field dependence of the critical current is consistent with a theoretical fit using the narrow junction model. The superconducting quantum interference device (SQUID) was also fabricated using two PbIn-Au-PbIn junctions connected in parallel. Under perpendicular magnetic field, we clearly observed periodic oscillations of dV/dI with a period of magnetic flux quantum threading into the supercurrent loop of the SQUID. Our fabrication methods would provide an easy and simple way to explore the superconducting proximity effects without ultra-low-temperature cryostats.

• 한국의학물리학회지:의학물리
• /
• 제31권3호
• /
• pp.124-134
• /
• 2020

Here we review the evolutionary history of radiation therapy technology through the festschrift of articles in celebration of the 30th anniversary of Korean Society of Medical Physics (KSMP). Radiation therapy technology used in clinical practice has evolved over a long period of time. Various areas of science, such as medical physics, mechanical engineering, and computer engineering, have contributed to the continual development of new devices and techniques. The scope of this review was restricted to two areas; i.e., output energy production and functional development, because it is not possible to include all development processes of this technology due to space limitations. The former includes the technological transition process from the initial technique applied to the first model to the latest technique currently used in a variety of machines. The latter has had a direct effect on treatment outcomes and safety, which changed the paradigm of radiation therapy, leading to new guidelines on dose prescriptions, innovation of dose verification tools, new measurement methods and calculation systems for radiation doses, changes in the criteria for errors, and medical law changes in all countries. Various complex developments are covered in this review. To the best of our knowledge, there have been few reviews on this topic and we consider it very meaningful to provide a review in the festschrift in celebration of the 30th anniversary of the KSMP.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.52-56
• /
• 2008

According to the improvement of HTS conductor, HTS tapes which have the high current capacity have been recently researched in several nations. For large power application, AC loss is the most important issue in the development of AC superconducting power devices because it is closely related to the system operation efficiency. In 1st generation wire of HTS conductor, BSCCO, AC loss is too large to use for power application. Also, It is well known in recently years that YBCO CC, the 2nd generation wire, has also too much AC loss to apply to AC power devices. There are many trials to develop the new HTS wire having the low AC loss around the world. In this research, we present the measurment result of magnetization losses in SmBCO coated conductors. We measured the magnetization loss generated by perpendicularly exposed external magnetic field and compared with the analytic value of the strip model. Also, we presented the results compared with measured magnetization loss of an YBCO coated conductor.

• Progress in Superconductivity
• /
• 제4권1호
• /
• pp.19-26
• /
• 2002

We have earlier developed a 40-channel SQUID system. An important figure of merit of a MEG system is the localization error, within which the underlying current source can be localized. With this system, we investigated the localization error in terms of the standard deviation of the coordinates of the ECDs and the systematic error due to inadequate modeling. To do this, we made localization of single current dipoles from tangential components of auditory evoked fields. Equivalent current dipoles (ECD) at N1m peak were estimated based on a locally fitted spherical conductor model. In addition, we made skull phantom and simulation measurements to investigate the contribution of various errors to the localization error. It was found that the background noise was the main source of the errors that could explain the observed standard deviation. Further, the amount of systematic error, when modeling the head with a spherical conductor, was much less than the standard deviation due to the background noise. We also demonstrated the performance of the system by measuring the evoked fields to grammatical violation in sentence comprehension.

• 한국의학물리학회지:의학물리
• /
• 제18권4호
• /
• pp.194-201
• /
• 2007

감마나이프는 한 번에 수 Gy의 선량을 조사하는 일반 방사선 치료에 비하여 훨씬 많은 수십 Gy의 고선량을 한 번에 조사하기 때문에 조사되는 방사선량의 절대값 측정이 매우 중요하다. 그러나, 감마나이프의 물흡수선량 절대 측정값을 검증하는 연구는 많지 않다. 더욱이, 물팬텀 사용을 규정한 국제원자력기구(International Atomic Energy Agency: IAEA) TRS-398 프로토콜을 적용하여 물흡수선량을 측정한 연구는 보고되고 있지 않다. 본 연구에서는 IAEA TRS- 398 프로토콜을 이용하여 감마나이프 C모델의 물흡수선량을 측정하는 실험을 하였다. 본 실험에서는 IAEA TRS-398에 규정한 바를 최대한 따르면서 물팬텀을 제작하여 감마나이프 C모델의 물흡수선량을 측정하고, 감마나이프 제작사에서 제공하는 플라스틱 팬텀에서 측정한 값과 비교하였다. 이온함으로는 Capintec 사의 PR-05P mini-chamber 두 개를 사용하였고, 전리계로는 PTW사의 UNIDOS를 사용하였다. 측정 결과 물팬텀에서 측정한 감마나이프 모델C의 물흡수선량은 제작사의 플라스틱팬텀에서 측정한 값에 비하여 1.38% 크게 나타났다- 따라서, 현재 국내 감마나이프센터에서 사용하고 있는 제작사에서 제공하고 물흡수선량 측정 프로토콜에는 물팬텀 대신 플라스틱팬텀을 사용하는 데 따른 기온적인 문제점이 있는 것으로 판단된다. 결론적으로 IAEA TRS-398프로토콜을 직접적으로 감마나이프 물흡수선량 측정에 적용하는 것은 기준조건을 만족시킬 수 없기 때문에 불가능한 것으로 판단되며, 새로운 프로토콜을 작성하거나, 물팬텀과 기존의 플라스틱 팬텀으로 측정한 값 사이의 변환계수를 제공하는 것이 현실적인 대안이 될 것이다.

• 한국의학물리학회지:의학물리
• /
• 제28권4호
• /
• pp.135-143
• /
• 2017

Chemical Exchange Saturation Transfer (CEST) imaging is a method to detect solutes based on the chemical exchange of mobile protons with water. The solute protons exchange with three different patterns, which are fast, slow, and intermediate rates. The CEST contrast can be obtained from the exchangeable protons, which are hydroxyl protons, amine protons, and amide protons. The CEST MR imaging is useful to evaluate tumors, strokes, and other diseases. The purpose of this study is to review the mathematical model for CEST imaging and for measurement of the chemical exchange rate, and to measure the chemical exchange rate using a 3T MRI system on several amino acids. We reviewed the mathematical models for the proton exchange. Several physical models are proposed to demonstrate a two-pool, three-pool, and four-pool models. The CEST signals are also evaluated by taking account of the exchange rate, pH and the saturation efficiency. Although researchers have used most commonly in the calculation of CEST asymmetry, a quantitative analysis is also developed by using Lorentzian fitting. The chemical exchange rate was measured in the phantoms made of asparagine (Asn), glutamate (Glu), ${\gamma}-aminobutyric$ acid (GABA), glycine (Gly), and myoinositol (MI). The experiment was performed at a 3T human MRI system with three different acidity conditions (pH 5.6, 6.2, and 7.4) at a concentration of 50 mM. To identify the chemical exchange rate, the "lsqcurvefit" built-in function in MATLAB was used to fit the pseudo-first exchange rate model. The pseudo-first exchange rate of Asn and Gly was increased with decreasing acidity. In the case of GABA, the largest result was observed at pH 6.2. For Glu, the results at pH 5.6 and 6.2 did not show a significant difference, and the results at pH 7.4 were almost zero. For MI, there was no significant difference at pH 5.6 or 7.4, however, the results at pH 6.2 were smaller than at the other pH values. For the experiment at 3T, we were only able to apply 1 s as the maximum saturation duration due to the limitations of the MRI system. The measurement of the chemical exchange rate was limited in a clinical 3T MRI system because of a hardware limitation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권6호
• /
• pp.739-743
• /
• 2011

The aim of this paper was to estimate genetic parameters for body weight and five body measurements for an experimental population of Iranian Makooei sheep maintained at the Makooei Sheep Breeding Station at Makoo, Iran. To do this, yearling live weight (YW), and five body measurements, i.e., body length (BL), heart girth (HG), height at withers (HW), height at back (HB) and scrotal circumference (SC), were analyzed in a multi-trait animal model using the DXMUX program of DFREML software package. Heritability estimates were $0.22{\pm}0.08$, $0.11{\pm}0.06$, $0.21{\pm}0.07$, $0.17{\pm}0.06$, $0.17{\pm}0.06$ and $0.32{\pm}0.10$ for YW, BL, HG, HW, HB and SC, respectively. These estimates indicate that selection in Makooei sheep would generate moderate genetic progress in body weight and body measurements. Scrotal circumference, as an indicator of reproductive potential, exhibited the highest heritability. This trait, therefore, could successfully be used to increase productivity of males and, indirectly, female fertility. Genetic correlations between traits studied were all positive and ranged from 0.15 (YW/HB) to 0.99 (HW/HB). Phenotypic correlations were also positive and ranged from moderate (0.32, HW/SC) to high (0.94, HW/HB). Positive genetic and phenotypic correlations indicate that improvement in body measurements both at the genetic and phenotypic levels is expected through selection on body weight and vice versa.