• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.80-87
• /
• 2015

Memristor is a new kind of memory device whose resistance varies depending upon applied charge and whose previous resistance state is preserved even when its power is off. Ordinary memristor has a nonlinear programming characteristics about time when a constant voltage is applied. For the easiness of programming, it is desirable that resistance is programmed linearly about time. We had proposed previously a memristor bridge configuration with which weight can be programmed nicely in positive, negative or zero. In memristor bridge circuit, two memristors are connected in series with different polarity. Memristors are complementary each other and it follows that the memristance variation is linear with respect to time. In this paper, the linearization effect of weight programming of memristor bridge synapse is investigated and verified about both $TiO_2$ memristor from HP and a nonlinear memristor with a window function. Memristor bridge circuit would be helpful to conduct synaptic weight programming.

• Journal of Environmental Health Sciences
• /
• v.21 no.4
• /
• pp.75-86
• /
• 1995

This study was performed to investigate the negative side effects of video display terminal (VDT) work on the human body and to provide data for preventing VDT syndrome. A questionnaire survey was made to 339 VDT workers at 22 offices in Taegu, Kyungpook and Kyungnam areas from July 1 to August 31, 1994, and 280 of them were finally used for statistical analysis. The VDT syndrome in the present study inclhded five factors, namely as eye-related symptom, psychological symptom, general body symptom, musculoskeletal symptom, and skin-related symptom, and the estimates of Crombach coefficients of the five factors were 0.954, 0.952, 0.953, 0.957, and 0.955, respectively, showing very high reliability. In view of socio-economical characteristics, the symptoms of female were higher than those of male in the order of musculoskeletal symptom, eye-related symptom, skin-related symptom and psychological symptom. The age group of 30 years or less was higher than the older groups in the order of musculoskeletal symptom, eye-related symptom, psychological symptom and skinrelated symptom. The group of lower education level showed higher skin-related symptom. The psychological symptom and skin-related symptom increased as the amount of smoking increased. Higher eye-related symptom was observed in the group without glasses. In the job-related variables, the group of working on programming and data input showed higher eye-related symptom and psychological symptom. The group of working on programming and graphic design showed higher musculoskeletal symptom and skin-related symptom. The skin-related symptom increased as the total time of VDT operation per day increased. The group of working 2-4 hours followed by 15 minutes rest was higher in musculoskeletal symptom and psychological symptom. Higher musculoskeletal symptom was observed from the group working on Friday and Sunday. The group of 1 year or less working showed higher in skin-related symptom. In relation with the VDT type, all symptoms except skin-related symptom were higher in the group using monochrome monitor. As showed above, the questionnaire could be a tool for evaluating VDT syndrome and prevention of the syndrome would be possible by a comprehensive consideration of factors including socio-economic characteristics, job-related variables and VDT type.

• Computers and Concrete
• /
• v.26 no.4
• /
• pp.327-342
• /
• 2020

The objective of this study is to manufacture environmentally-friendly synthetic lightweight aggregates that may be used in the structural lightweight concrete production. The cold-bonding pelletization process has been used in the agglomeration of the pozzolanic materials to achieve these synthetic lightweight aggregates. In this context, it was aimed to recycle the waste fly ash by employing it in the manufacturing process as the major cementitious component. According to the well-known facts reported in the literature, it is stated that the main disadvantage of the synthetic lightweight aggregate produced by applying the cold-bonding pelletization technique to the pozzolanic materials is that it has a lower strength in comparison with the natural aggregate. Therefore, in this study, the metakaolin made of high purity kaolin and calcined kaolin obtained from impure kaolin have been employed at particular contents in the synthetic lightweight aggregate manufacturing as a cementitious material to enhance the particle crushing strength. Additionally, to propose a curing condition for practical attempts, different curing conditions were designated and their influences on the characteristics of the synthetic lightweight aggregates were investigated. Three substantial features of the aggregates, specific gravity, water absorption capacity, and particle crushing strength, were measured at the end of 28-day adopted curing conditions. Observed that the incorporation of thermally treated kaolin significantly influenced the crushing strength and water absorption of the aggregates. The statistical evaluation indicated that the investigated properties of the synthetic lightweight aggregate were affected by the thermally treated kaolin content more than the kaoline type and curing regime. Utilizing the thermally treated kaolin in the synthetic aggregate manufacturing lead to a more than 40% increase in the crushing strength of the pellets in all curing regimes. Moreover, two numerical formulations having high estimation capacity have been developed to predict the crushing strength of such types of aggregates by using soft-computing techniques: gene expression programming and artificial neural networks. The R-squared values, indicating the estimation performance of the models, of approximately 0.97 and 0.98 were achieved for the numerical formulations generated by using gene expression programming and artificial neural networks techniques, respectively.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.4
• /
• pp.58-64
• /
• 1997

FLC(Fuzzy Logic Controller) is stronger to the disturbance than a classical controller and its overshoot of the intialized value is excellent. In case an unknown process or the mathematical modeling of a complicated system is impossible, a fit control quantity can be acquired by the Fuzzy inference. But FLC can not converge correctly to the desirable value because the FLC's output value by the size of the quantization level of the Fuzzy variable always has a minor error. There are many ways to eliminate the minor error, but I will suggest GA-FLC and EP-FLC Hybrid controller which csombines FLC with GA(Genetic Algorithm) and EP(Evo1ution Programming). In this paper, the output characteristics of this Hybrid controller will be compared and analyzed with those of FLC, it will he showed that this Hybrid controller converge correctly to the desirable value without any error, and !he convergence speed performance of these two kinds of Hyhrid controller also will be compared.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.1
• /
• pp.92-98
• /
• 2013

There are lots of studies about hybrid electric vehicles (HEVs) because of the global warming and energy problems. Series and parallel HEVs are the common types of many developing hybrid vehicle types. Series HEV uses engine only as the generator for the battery but parallel HEV utilizes engine for driving and generating of the vehicle. In this paper, backward simulations based on dynamic programming were conducted for the fuel economy analysis of two different types of hybrid transit buses depending on driving cycles. It is shown that there is a relation between the type of HEV and the characteristics of driving cycles. Regarding the aggressiveness, the series hybrid bus is more efficient than the parallel system on highly aggressive driving cycle. On the other hand, the parallel hybrid bus is more efficient than the series system on low aggressive driving cycle. Based on this results of the paper, it is expected to choose more efficient type of the hybrid buses according to the driving cycle.

• Geomechanics and Engineering
• /
• v.36 no.5
• /
• pp.465-474
• /
• 2024

Uniaxial compressive strength (UCS) is a critical geomechanical parameter that plays a significant role in the evaluation of rocks. The practice of indirectly estimating said characteristics is widespread due to the challenges associated with obtaining high-quality core samples. The primary aim of this study is to investigate the feasibility of utilizing the gene expression programming (GEP) technique for the purpose of forecasting the UCS for various rock categories, including Schist, Granite, Claystone, Travertine, Sandstone, Slate, Limestone, Marl, and Dolomite, which were sourced from a wide range of quarry sites. The present study utilized a total of 170 datasets, comprising Schmidt hammer (SH), porosity (n), point load index (Is(50)), and P-wave velocity (Vp), as the effective parameters in the model to determine their impact on the UCS. The UCS parameter was computed through the utilization of the GEP model, resulting in the generation of an equation. Subsequently, the efficacy of the GEP model and the resultant equation were assessed using various statistical evaluation metrics to determine their predictive capabilities. The outcomes indicate the prospective capacity of the GEP model and the resultant equation in forecasting the unconfined compressive strength (UCS). The significance of this study lies in its ability to enable geotechnical engineers to make estimations of the UCS of rocks, without the requirement of conducting expensive and time-consuming experimental tests. In particular, a user-friendly program was developed based on the GEP model to enable rapid and very accurate calculation of rock's UCS, doing away with the necessity for costly and time-consuming laboratory experiments.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.3
• /
• pp.107-115
• /
• 2009

Traditionally, simulation method is used to test and evaluate the performance of communication protocol or functional elements for mobile communication service. In this paper, wireless network simulator is implemented using the C++ object-oriented programming language. This simulator can simulate wireless data services, like as ad-hoc networks, by considering the user's mobility. In this paper, the simulator includes network traffic model to reflect wireless data service and traffic source model to represent a user's mobility similar to real service environment and traffic characteristics can be reflected on the simulation, and also more accurate simulation results can be got through that. In addition, by using object-oriented techniques, new service feature or environment can be easily added or changed so that the developed mobile communication simulator can reflect the real service environment all the time. This simulator can be used in adjusting the characteristics of wireless data hosts following the mobility of the user, and also can be used in building new wireless ad-hoc network routing protocols.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1518-1523
• /
• 2012

In this study, the novel digital filtering algorithms are implemented to suppress the noisy characteristics embedded in ambulatory electrocardiogram signals by an android smartphone platform. With this aim, Graphical User Interface (GUI) is designed and implemented by utilizing multithread-Java programming to realize Finite Impulse Response and Infinite Impulse Response filter. With simulating our implemented digital filters built in an android smartphone, we can find the fact that we can efficiently suppresses the noisy characteristics due to baseline wandering and 60 Hz powerline source fluctuations especially in electrocardiograms.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.1
• /
• pp.9-16
• /
• 1984

This paper describes the minimum cost expansion planning which is based on the economical aspect under the various conditions on the power system expansion planning. It presents not only linear cost characteristics analysis but also stepwise cost characteristics analysis which satisfies practical condition in the power system. The latter analysis must be handled by integer programming (IP), because the relation between the cost and the capacity has stepwise characteristics. In order to proceed the latter analysis, the solving procedure is illustrated in detais by using branch and bound method which includes the network flow theory and maximum flow-minimum cut theorem.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.102-105
• /
• 1993

The objective of this study is to solve the operation scheduling problem of plural battery energy storage systems (BESS), and to find useful intonation from its result. Unlike conventional energy storage system, BESS has on hardware characteristics such as high efficiency, fast-acting response and operational loss. Considering rate constraints of thermal unit power as well as hardware characteristics of BESS, the operation scheduling has an intricated problem. In order to solve this optimization problem, we use successive approximations dynamic programming. In two types of operation, the proposed algorithm is applied to test system. one is daily optimal operation, the other weekly optimal operation.