• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.5
• /
• pp.211-220
• /
• 2003

The control method of programmable dynamometer for overall test of machine is to load the reference torque which is computed from torque transducer into motor under test. But the torque information detected from torque transducer have a lot of noise when the load torque of meter is a small quantity or changing. Thus, torque transducer must have a low pass filter to detect a definite torque information. But The torque delay generated by filter with torque transducer occur a torque trouble for meter torque of programmable dynamometer. Therefore, this kind of system could not perform dynamic and nonlinear load. In this paper, the control method using the load torque observer without a measure for torque transducer is Proposed. The proposed system improved the problem of the torque measuring delay with torque transducer, and the load torque is estimated by the minimal order state observer based on the torque component of the vector control induction meter. Therefore, the torque controller is not affected by a load torque disturbance. To verify a superiority of the proposed control algorithm, the analysis for a root locus of a conventional control method and the proposed one, and simulation and experiment is performed. Therefore we hope to be extended in industrial application.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.675-679
• /
• 2007

The control method of programmable dynamometer for overall test of machine is to load reference torque which is computed from torque transducer into motor under test. But the torque information detected from torque transducer have a lot of noise when the load torque of moter is a small quantity or changing. Thus, torque transducer must have a low pass filter to detect a definite torque information. But The torque delay generated by filter with torque transducer occur a torque trouble for moter torque of programmable dynamometer. Therefore, this kind of system could not perform dynamic and nonlinear load. In this paper, the control method using the load torque observer without a measure for torque transducer is proposed. The proposed system improved the problem of the torque measuring delay with torque transducer, and the load torque is estimated by the minimal order state observer based on the torque component of the vector control induction moter. Therefore, the torque controller is not affected by a load torque disturbance.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.411-412
• /
• 2012

본 논문은 유도 전동기 센서리스 제어를 위해 자속 추정기로 사용되는 Programmable low-pass filter (PLPF)의 문제점 분석과 그 해결방안에 관한 연구이다. 기존의 PLPF는 추정된 동기 각속도를 극점으로 사용하고 실제 동기 각속도가 추정 값과 동일하다는 가정하에 순수 적분기와의 위상과 크기 오차를 보상한다. 하지만 추정 동기 각속도가 실제 값과 같지 않다면 이때 얻어진 크기와 위상 보상은 적절하지 않게 되고, 결과적으로 PLPF는 순수적분 기능을 제대로 수행할 수 없게 된다. 본 논문은 PLPF의 문제점을 극복하고자 동기 각속도 오차가 고정자 자속의 위상 지연 오차와 비례함을 분석하고, 이를 통하여 동기 각속도 오차를 보상하는 방법을 제안하였다. 제안한 방법의 타당성은 실험을 통하여 증명되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.1
• /
• pp.30-38
• /
• 1984

In this paper, we designed the programmable 2nd order switched capacitor filter that the center frequency can be varied linearly with the clock frequency, and that the peak gaion and the selectivity can be controlled with digital signal by the capacitor array. In addition, speech synthesizer system was constructed with this filter, korean consonants being synthesized. Therefore, this filter shows the possibility that most Korean language sounds can be synthesized in the real time mode.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.419-430
• /
• 2015

Flux estimation is a significant foundation of high-performance control for DC-excited synchronous motor. For almost all flux estimators, such as the flux estimator based on phase locked loop (PLL), DC drift causes fluctuations in flux magnitude. Furthermore, significant dynamic error may be introduced at transient conditions. To overcome these problems, this paper proposes an improved flux estimator for the PLL-based algorithm. Filters based on the generalized integrator are used to avoid flux fluctuation problems caused by the DC drift at the back electromotive force. Programmable low-pass filters are employed to improve the dynamic performance of the flux estimator, and the cutoff frequency of the filter is determined by the dynamic factor. The algorithm is verified by a 960V/1.6MW industrial prototype. Simulation and experimental results show that the proposed estimator can estimate the flux more accurately than the PLL-based algorithm in a cycloconverter-fed DC-excited synchronous machine vector control system.

• ETRI Journal
• /
• v.42 no.4
• /
• pp.534-548
• /
• 2020

This study presents a new architecture for a field programmable analog array (FPAA) for use in low-frequency applications, and a generalized circuit realization method for the implementation of nth-order elliptic filters. The proposed designs of both the FPAA and elliptic filters are based on the operational transconductance amplifier (OTA) used in implementing OTA-C filters for biopotential signal processing. The proposed FPAA architecture has a flexible, expandable structure with direct connections between configurable analog blocks (CABs) that eliminates the use of switches. The generalized elliptic filter circuit realization provides a simplified, direct synthetic method for an OTA-C symmetric balanced structure for even/odd-nth-order low-pass filters (LPFs) and notch filters with minimum number of components, using grounded capacitors. The filters are mapped on the FPAA, and both architectures are validated with simulations in LTspice using 90-nm complementary metal-oxide semiconductor (CMOS) technology. Both proposed FPAA and filters generalized synthetic method achieve simple, flexible, low-power designs for implementation of biopotential signal processing systems.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1547-1550
• /
• 2002

Reconfigurable computing is a new computing paradigm which has more potential in terms of performance and flexibility. Reconfigurable computing systems are opening a new era in digital signal processing such as multimedia, communication and consumer electronics because they can filter data rapidly and excel at pattern recognition, image process- ing and encryption. Although many reconfigurable computing systems use a conventional programmable device, they carry several serious problems to be solved. This paper proposes a logic block architecture of programmable device suit-able for the reconfigurable computing. Compared to conventional logic blocks, our logic block can improve implementation density, efficiency and speed.

• ETRI Journal
• /
• v.41 no.1
• /
• pp.32-41
• /
• 2019

We propose a speckle reduction technique in electronic holographic display systems, where digital micro-mirror array devices are used as spatial light modulators. By adopting a programmable filtration in a general 4-f optic configuration, it is shown that the signal spectrum components in the frequency domain of a viewing-window-based holographic display system can be selectively filtered. Compared to the widely utilized single-sideband filtration techniques in electronic holographic display systems, our proposed programmable filtration can be utilized to effectively reduce the speckles in the reconstruction of point-cloud-based computer-generated holograms. Experimental results are presented to verify our proposed concept.

• The Journal of Engineering Research
• /
• v.6 no.1
• /
• pp.111-124
• /
• 2004

The advanced semiconductor technology and electronic design automation(EDA) tools make it possible to implement the system on the programmable logic devices. The electronic design method is also changing from schematic capture to hardware description language. In this paper, I present the architecture of multi-dimensional digital filter which can be efficiently implemented on PLDs. This is based on the former research results which are called algorithm decomposition technique. Algorithm decomposition technique is used to obtain the computational primitive from the state space equations of the multi-dimensional digital filtering algorithm. The obtained computational primitive is designed with VHDL. This can be used to implement the filtering system as a component. The designed filtering system is implemented on the PLD. Therefore, the filter can be upgradable on system. It is greatly reduced the time-to-market time of the system that is based on the multi-dimensional filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1573-1576
• /
• 2004