• 천문학회지
• /
• 제48권2호
• /
• pp.105-112
• /
• 2015

The symbiotic star V1016 Cygni, a detached binary system consisting of a hot white dwarf and a mass-losing Mira variable, shows very broad emission features at around 6825 Å and 7082 Å, which are Raman scattered O vi λλ 1032, 1038 by atomic hydrogen. In the high resolution spectrum of V1016 Cyg obtained with the Bohyunsan Optical Echelle Spectrograph these broad features exhibit double peak profiles with the red peak stronger than the blue counterpart. However, their profiles differ in such a way that the blue peak of the 7082 feature is relatively weaker than the 6825 counterpart when the two Raman features are normalized to exhibit an equal red peak strength in the Doppler factor space. Assuming that an accretion flow around the white dwarf is responsible for the double peak profiles, we attribute this disparity in the profiles to the local variation of the flux ratio of O vi λλ 1032, 1038 in the accretion flow. A Monte Carlo technique is adopted to provide emissivity maps showing the local emissivity of O vi λ1032 and O vi λ1038 in the vicinity of the white dwarf. We also present a map indicating the differing flux ratios of O vi λλ 1032 and 1038. Our result shows that the flux ratio reaches its maximum of 2 in the emission region responsible for the central trough of the Raman feature and that the flux ratio in the inner red emission region is almost 1. The blue emission region and the outer red emission region exhibit an intermediate ratio around 1.5. We conclude that the disparity in the profiles of the two Raman O vi features strongly implies accretion flow around the white dwarf, which is azimuthally asymmetric.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.123.1-123
• /
• 2003

The objective of this work was to analyze the population of sequence variants of citrus tristeza virus (CTV) isolates in Korea and to make the phylogeny trees of CTV in Korea. We also tried to analyze and find the mild strain of CTV to apply for the cross protection. The CTV isolates from yuzu (C. Junos) collected from different geographic areas of Southern provinces such as Namhae-Do, Kerche-Do, Bosung, Wan-Do and Koheung and Jeju-Bo, Korea were used for SSCP analysis. The SSCP profiles of the cDNAS obtained by RT-PCR with primers specifically designed for the p20 of the CTV population. The SSCP profiles obtained from 150 PCR products in yuzu contained two or three DNA bands, whereas, in some case, others contained four or more bands of similar intensity. The pathologically mild isolates of CTV usually yielded two DNA bands by SSCP profiles, whereas the SSCP profiles of the most virulent isolates contained more than two DNA bands. Plants shown severe stem pitting were corresponded to those plants with typical SSCP profiles of severe strains, and vice versa. This results indicate that the primers designed for SSCP analysis can be used for distinguishing the mild strains from severe strains of CTV.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
• /
• pp.63-68
• /
• 2005

Transcription factors regulate gene expression by binding to gene upstream region. Each transcription factor has the specific binding site in promoter region. So the analysis of gene upstream sequence is necessary for understanding regulatory mechanism of genes, under a plausible idea that assumption that DNA sequence motif profiles are closely related to gene expression behaviors of the corresponding genes. Here, we present an effective approach to the analysis of the relation between gene expression profiles and gene upstream sequences on the basis of kernel canonical correlation analysis (kernel CCA). Kernel CCA is a useful method for finding relationships underlying between two different data sets. In the application to a yeast cell cycle data set, it is shown that gene upstream sequence profile is closely related to gene expression patterns in terms of canonical correlation scores. By the further analysis of the contributing values or weights of sequence motifs in the construction of a pair of sequence motif profiles and expression profiles, we show that the proposed method can identify significant DNA sequence motifs involved with some specific gene expression patterns, including some well known motifs and those putative, in the process of the yeast cell cycle.

• Journal of Biosystems Engineering
• /
• 제18권3호
• /
• pp.275-287
• /
• 1993

The flow characteristics of the transitional oscillatory flows are investigated analytically and experimentally in the entrance region of a square duct. The systems of conservation equations are analytically solved by linearizing the non-linear convective terms for the developing transitional oscillatory flows in a square duct. The analytical solutions are obtained in the form of infinite series for the velocity profiles. The experimental study for the air flow in a square duct is carried out to measure the velocity profiles and waveforms by using a hot-wire anemometer with the data acquisition and processing systems. The theoretical and experimental results provide the major characteristics of the developing transitional oscillatory flows, such as velocity profiles, velocity waveforms, and entrance length. The velocity profiles in the decelerating phase are larger than those in the accelerating phase for the developing transitional oscillatory flows. The correlations of the entrance length of the transitional oscillatory flows in a square duct are found to be $Le/Dh=K{\cdot}Re_{os}/2({\omega}^+)^2$, where K is 1.23 of an experimental constant.

• Structural Engineering and Mechanics
• /
• 제51권2호
• /
• pp.315-331
• /
• 2014

The present study investigated the effect of the correlation of the measured road roughness profiles corresponding to the left and right wheels of a vehicle on the vibration of a vehicle-bridge coupling system. Four sets of road roughness profiles were measured by a laser road-testing vehicle. A correlation analysis was carried out on the four roughness samples, and two samples with the strongest correlation and weakest correlation were selected for the power spectral density, autocorrelation and cross-correlation analyses. The scenario of a three-axle truck moving across a rigid-frame arch bridge was used as an example. The two selected road roughness profiles were used as inputs to the vehicle-bridge coupling system. Three different input modes were adopted in the numerical analysis: (1) using the measured road roughness profile of the left wheel for the input of both wheels in the numerical simulation; (2) using the measured road roughness profile of the right wheel for both wheels; and (3) using the measured road roughness profiles corresponding to left and right wheels for the input corresponding to the vehicle's left and right wheels, respectively. The influence of the three input modes on the vibration of the vehicle-bridge system was analyzed and compared in detail. The results show that the correlation of the road roughness profiles corresponding to left and right wheels and the selected roughness input mode both have a significant influence on the vibration of the vehicle-bridge coupling system.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2675-2685
• /
• 1994

A study has been conducted to provide the experimental information for the velocity and temperature profiles of steam-air mixutre and to investigate their roles on the film condensation with wavy interface. Saturated gas mixture of steam-air was made to flow through the nearly horizontal$(4.1^{\circ})$ square duct of 0.1m width and 1.56m length at atmospheric pressure, and was condensated on the bottom cold plate. The air mass fraction in the gas mixture was changed from zero(W =0, pure steam) to one(W =1, pure air), and the bulk velocity was varied from 2 to 4 m/s. Water film was injected concurrently to investigate the effect of wavy interface on the condensation. The velocity and temperature profiles were measured by LDA system and thermocouples along the three parameters ; air mass fraction, mixture velocity and film flow rate. The profiles moved toward the interface with increasing steam mass fraction, mixture velocity and film flow rate. The Prandtl and Schmidt numbers were near one in the present experimental range, however there was no complete similarity between the velocity and temperature profiles of gas mixture. And the heat transfer characteristics and interfacial structure were coupled with each other.

• 한국도로학회논문집
• /
• 제14권3호
• /
• pp.9-14
• /
• 2012

본 논문에서는 경량 프로파일러를 이용한 프로파일을 측정하여 매크로 텍스쳐 크기를 산정하고 분석하였다. 밀입도, 배수성, SMA, 기층 포장에 대한 프로파일을 측정하여 포장에 사용된 골재에 의한 매크로 텍스쳐 크기를 분석하였으며, 재료분리가 일어난 지역의 프로파일을 측정하여 매크로 텍스쳐 깊이를 분석하였다. 본 연구 결과 프로파일 분석을 통하여 효과적으로 매크로 텍스쳐 크기를 산정할 수 있었으며, 아스팔트 혼합물 종류별로 텍스쳐 크기를 분석할 수 있었다. 또한, 매크로 텍스쳐 크기를 산정하여 분석함으로써 재료분리가 일어난 지역을 탐지할 수 있었다.

• Progress in Superconductivity
• /
• 제8권2호
• /
• pp.169-174
• /
• 2007

We measured the field profiles, H(x)'s of coated conductors by using scanning Hall probe method when various magnetic fields, $H{_\alpha}'s$ or currents, I's were applied. From the measured field profiles, we calculated the current profiles, J(x)'s by the inversion method. The calculated J(x)'s of coated conductors show some different properties from the standard critical state model. $J{_c}'s$ are inhomogeneous varying with the positions and are not constant when $H_{\alpha}$ or I changes. And when I decreases the features of current reversion are remarkably different from the model.

• 한국식품영양과학회지
• /
• 제21권6호
• /
• pp.681-685
• /
• 1992

돼지고기에서 분리한 bacteriocin 생성능이 우수한 젖산균을 동정하기 위하여 이미 알려진 몇가지 젖산균을 참고균으로 하여 10% denaturing polyacrylamide gel에 전기영동으로 전개한 5S rRNA 와 tRNA 등 150개 이하의 핵산으로 구성된 저분자량 RNA(Low Molecular Weight RNA : LMW RNA) profiles에 나타난 15~25개의 밴드 양상이 균에 따라 차이점을 보여 동정에 효과적으로 이용할 수 있었다. 새로 분리한 젖산균은 참고균과는 다른 균종이었다. APT, TSB, MRS의 3종류 다른 배지에서 배양하여도 LMW RNA profiles에는 차이가 없었으며, 겔상의 밴드 전개거리를 3개의 표준 분자량 물질을 이용하여 만든 표준곡선을 사용하여 상대핵산단위(relative nucleotide units : RNU)로 나타낸 밴드의 양상을 도표화 하는 것이 profiles를 서로 비교 하는데 편리하였다.

• Wind and Structures
• /
• 제17권4호
• /
• pp.419-433
• /
• 2013

This paper investigates the vertical profiles of horizontal mean wind speed and direction based on the synchronized measurements from a Doppler radar profiler and an anemometer during 16 tropical cyclones at a coastal site in Hong Kong. The speed profiles with both open sea and hilly exposures were found to follow the log-law below a height of 500 m. Above this height, there was an additional wind speed shear in the profile for hilly upwind terrain. The fitting parameters with both the power-law and the log-law varied with wind strength. The direction profiles were also sensitive to local terrain setups and surrounding topographic features. For a uniform open sea terrain, wind direction veered logarithmically with height from the surface level up to the free atmospheric altitude of about 1200 m. The accumulated veering angle within the whole boundary layer was observed to be $30^{\circ}$. Mean wind direction under other terrain conditions also increased logarithmically with height above 500 m with a trend of rougher exposures corresponding to lager veering angles. A number of empirical parameters for engineering applications were presented, including the speed adjustment factors, power exponents of speed profiles, and veering angle, etc. The objective of this study aims to provide useful information on boundary layer wind characteristics for wind-resistant design of high-rise structures in coastal areas.