• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1516-1521
• /
• 2008

Recently, distribution load analysis using AMR (Automatic Meter Reading) data is researched in electric utilities. Load analysis method based on AMR system generates the typical load profile using load data of AMR customers, estimates the load profile of non-AMR customers, and analyzes the peak load and load profile of the distribution circuits and sectors per every 15 minutes/hour/day/week/month. Typical load profile is generated by the algorithm calculating the average amount of power consumption of each groups having similar load patterns. Traditional customer clustering mechanism uses only contract type code as a key. This mechanism has low accuracy because many customers having same contract code have different load patterns. In this research, We propose a customer clustring mechanism using k-means algorithm with contract type code and AMR data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.674-686
• /
• 2019

In this paper, we will discuss the absolute angular error control mode for the Gun/Turret driving system. The Gun/Turret driving controller receives absolute angular error calculated from the fire control system (FCS). Thus, the Gun/Turret driving controller is subjected to step command to cause residual vibration and system unstable. In order to reduce residual vibration and to ensure the system stability, we propose an error motion profile method with two types of trapezoidal and S-Curve. The validity of the proposed error motion profile method is confirmed via simulation by observing that the resulting position error, driving power, and power density satisfied the control performance.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.4
• /
• pp.166-171
• /
• 2008

We studied the variety and affinity between the successive words in the text document A number of groups were defined by the frequency of a following word in the whole text (corpus). In the previous studies, the Zipf's power law was explained by Chinese restaurant process and hub node was searched after by examining the edge number profile in scale free network. We have observed both a power law and a hub profile at the same time by studying the conditional frequency and degeneracy of a group. A symmetry between the affinity and the variety between words were found during the data analysis. And this phenomenon can be explained within a viewpoint of "exploitation and exploration." We also remark on a small symmetry breaking phenomenon in TIPSTER data.

• Wind and Structures
• /
• v.19 no.5
• /
• pp.505-522
• /
• 2014

While effects of the atmospheric boundary layer flow on engineering infrastructure are more or less known, some local transient winds create difficulties for structures, traffic and human activities. Hence, further research is required to fully elucidate flow characteristics of some of those very unique local winds. In this study, important characteristics of observed vertical velocity profiles along the main wind direction for the gusty Bora wind blowing along the eastern Adriatic coast are presented. Commonly used empirical power-law and the logarithmic-law profiles are compared against unique 3-level high-frequency Bora measurements. The experimental data agree well with the power-law and logarithmic-law approximations. An interesting feature observed is a decrease in the power-law exponent and aerodynamic surface roughness length, and an increase in friction velocity with increasing Bora wind velocity. This indicates an urban-like velocity profile for smaller wind velocities and rural-like velocity profile for larger wind velocities, which is due to a stronger increase in absolute velocity at each of the heights observed as compared to the respective velocity gradient (difference in average velocity among two different heights). The trends observed are similar during both the day and night. The thermal stratification is near neutral due to a strong mechanical mixing. The differences in aerodynamic surface roughness length are negligible for different time averaging periods when using the median. For the friction velocity, the arithmetic mean proved to be independent of the time record length, while for the power-law exponent both the arithmetic mean and the median are not influenced by the time averaging period. Another issue is a large difference in aerodynamic surface roughness length when calculating using the arithmetic mean and the median. This indicates that the more robust median is a more suitable parameter to determine the aerodynamic surface roughness length than the arithmetic mean value. Variations in velocity profiles at the same site during different wind periods are interesting because, in the engineering community, it has been commonly accepted that the aerodynamic characteristics at a particular site remain the same during various wind regimes.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1009-1011
• /
• 1997

This paper presents an optimization method which determines locations and size of capacitors simultaneously while minimizing power losses and improving voltage profile in radial distribution systems. Especially, the cost function associated with capacitor placement is considered as step function due to banks of standard discrete capacities. Genetic algorithms(GA) are used to obtain efficiently the solution of the cost function associated with capacitors which is non-continuous and non-differentiable function. The strings in GA consist of the node number index and size of capacitors to be installed. The length mutation operator, which is able to change the length of strings in each generation, is used. The proposed method which determines locations and size of capacitors simultaneously can reduce power losses and improve' voltage profile with capacitors of minimum size. Its efficiency is proved through the application in radial distribution systems.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.841-843
• /
• 2005

최근에 들어서 전력산업에 규제완화가 도입되면서 환경이 급변하고 있는 실정이다. 여러 가지의 환경변화가 예상되지만, 그 중에서도 공급자간에 경쟁 도입이 전력산업 참여자간에 주요 이슈로 부상하고 있다. 이와 같은 변화는 전력시스템의 기술 개발 뿐만 아니라 경영전략에도 큰 영향을 미치고 있으며, 대 수요자 서비스의 제공이 전략의 핵심이 되고 있다. 따라서 공급자는 보다 나은 서비스를 제공하기 위해서, 수요자 정보의 수집 및 분석을 해야 할 필요가 있다. 이와 같은 수요자 정보의 분석은 여러분야가 있지만 그 중에서도 수요특성을 파악하는 것이 가장 기본이 된다. 수요 특성은 원격검침시스템에서 수집되는 load profile 데이터로써 표현된다. 본 논문에서는 전력 수요자의 부하 특성을 분석하고 명가하기 위하여 수요특성별로 그룹으로 분류하는 방법을 개발하고, 분류된 그룹의 특징을 검토하였다. 이와 같은 부하분석의 정보는 가격설계, 수요 핀 에너지 예측, 송전 및 배전 계획, 에너지 효율 향상 및 부하관리의 필수 자료가 된다. 또한 향후에 개발될 전력 부가서비스의 주요 기반이 될 것으로 예상된다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.3
• /
• pp.221-227
• /
• 2022

The reliability improvement of PV systems is an important factor in reducing the cost of PV energy because it is closely related to the annual energy production as well as the maintenance cost of PV systems. The reliability of PV inverters plays a key role in the reliability of PV systems because it is regarded as one of the most reliable critical parts of PV systems. The lifetime evaluation of PV inverters considering the mission profile in the design phase plays an important role in reliability design to ensure the required lifetime of PV inverters. In this paper, the lifetime of representative single-phase T-type and I-type NPC inverters are comparatively evaluated by considering the mission profile of a PV system recorded at Iza, Spain. Furthermore, the effect of the pulse width modulation methods on the lifetime is also discussed. The lifetime evaluation of PV inverters is performed at the component-level first and then the system level by considering all power devices.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.385-396
• /
• 2000

The secondary motion of piston occurs due to the transient forces and moments in the clearances between piston skirt and cylinder liner The motions are very related to the skirt profile and the magnitude of piston-pin offset. Above all, the elastic deformation is another major effect on the piston secondary motion that has not been considered in the previous researches. In this work, the effects of elastic deformation of the piston skirt on the secondary piston motion are studied for the frictional power loss by using commercial softares, PISDYN and ANSYS.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.310-314
• /
• 2009

This paper presents the improvement of the voltage profiles of power system networks by the inclusion of Unified Power Flow Controller (UPFC). The mathematical model of the UPFC is incorporated in the load flow algorithm and the L-index is calculated for the different values of the control parameter r $and{\gamma}$. The positioning of the UPFC device is changed to minimize the sum of the squares of the L-indices at all load buses. The test cases considered for the improvement of voltage profile with the WSCC 9-bus and IEEE 30 bus system. With the best position of UPFC along with the control parameters the improvement in voltage profile of the power system networks are obtained. The results obtained are quite encouraging compared with other techniques used to identify the best location of UPFC.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.501-504
• /
• 2009

In order to investigate of possibility for developing urban wind power, wind profile and wind power density are estimated using Sodar and Lidar based on surface. Since poor performance of Sodar and Lidar are often shown in a paticular meteorological condition, inter-comparison and validation with radio-sonde for each of instruments are performed. As a result, Lidar shows a good performance and wind data from Lidar are used to analyze wind profile and wind power density. It can be found that a wind power system mounted tall building in urban area is very attractive.