• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.62-69
• /
• 1998

Spiral tube heat exchangers can find numerous applications in many engineering field. Flow in spital tubes is interest to engineers due to occurrence of secondary flow which enhances the cross-sectional mixing and the heat transfer rate. In the present study, an incompressible viscous 3-D flow in spiral tubes with rectangular cross-section of various torsion rate and Reynolds number is studied by using a finite volume method. It is shown that the axial velocity profile is affected by the secondary flow motion. Because there is some difference from correlation proposed by Hur et al., a lot of analysis and arrangement of experimental results are needed. This study showed the results of variation of hydrodynamic entry length for torsion and Re numbers.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2810-2815
• /
• 2008

Flow pulsation in the gap connecting with two parallel channels is investigated by RANS and URANS approaches. The two parallel channels are connected by a small channel called for a gap. The parallel channels are designed to have different cross section area with its ratio of 0.5. Computations are conducted using a CFX 11.0 code. The bulk Reynolds number is 60,000. Predicted results are compared with the previous experimental result. Mean velocity profile at the center of gap region are compared with experiments for its validation. Spectral analysis on the lateral velocity in the center of the gap is presented. Auto and cross correlation for the axial-flow velocity pattern are presented. The unsteady structure of the flow pulsation was visualized in the region of the gap in the parallel channel.

• Advances in nano research
• /
• 제8권4호
• /
• pp.323-333
• /
• 2020

In recent years, there has been an upsurge for the usage of buckling restrained braces (BRB) rather than ordinary braces, as they have evidently performed better. If the overall brace buckling is ignored, BRBs are proven to have higher energy absorption capacity and flexibility. This article aims to deliberate an economically efficient yet adequate type of all-steel BRB, comprised of the main components as in traditional ones, such as : (1) a steel core that holds all axial forces and (2) a steel restrainer tube that hinders buckling to occurr in the core; there is a more practical detailing in the BRB system due to the elimination of a filling mortar. An investigation has been conducted for the proposed rectangular-tube core BRB and it is hysteric behavioral results have been compared to previous researches conducted on a structure containing a similar plate core profile that has the same cross-sectional area in its core. A loss of strength is known to occur in the BRB when the limiting condition of local buckling is not satisfied, thus causing instability. This typically occurs when the thickness of the restrainer tube's wall is smaller than the cross-sectional area of the core plate or its width. In this study, a parametric investigation for BRBs with different formations has been performed to verify the effect of the design parameters such as different core section profiles, restraining member width to thickness ratio and relative cross-sectional area of the core to restrainer, on buckling load evaluation. The proposed BRB investigation results have also been presented and compared to past BRB researches with a plate profile as the core section, and the advantages and disadvantages of this configuration have been discussed, and it is concluded that BRBs with tubular core section exhibit a better seismic performance than the ones with a plate core profile.

• 한국전산유체공학회지
• /
• 제20권3호
• /
• pp.35-40
• /
• 2015

Centrifugal pumps consume considerable amounts of energy in various industrial applications. Therefore, improving the efficiency of pumps machine is a crucial challenge in industrial world. This paper presents numerical investigation of flow characteristics in volutes of centrifugal pumps in order to compare the energy consumption. A wide range of volumetric flow rate has been investigated for each case. The standard k-${\varepsilon}$ is adopted as the turbulence model. The impeller rotation is simulated employing the Multi Reference Frames(MRF) method. First, two different conventional design methods, i.e., the constant angular momentum(CAM) and the constant mean velocity (CMV) are studied and compared to a baseline volute model. The CAM volute profile is a logarithmic spiral. The CMV volute profile shape is an Archimedes spiral curve. The modified volute models show lower head value than baseline volute model, but in case of efficiency graph, CAM curve has higher values than others. Finally for this part, CAM curve is selected to be used in the simulation of different cross-section shape. Two different types of cross-section are generated. One is a simple rectangular shape, and the other one is fan shape. In terms of different cross-section shape, simple rectangular geometry generated higher head and efficiency. Overall, simulation results showed that the volute designed using constant angular momentum(CAM) method has higher characteristic performances than one by CMV volute.

• 패션비즈니스
• /
• 제8권6호
• /
• pp.25-38
• /
• 2004

The purpose of this study is to develop a dress form for elderly women according to their somatotype to be used for improving the fit of garments and patterns. Analyzing each somatotype, there was a significant difference among the 4 somatotypes in most of measure items. Bend-forward Group had shorter front length items. Abdomen-fat Group had lower upper-body values than Average Group and similar lower-body values to Fat Group. In most items except height, Fat Group had the biggest values. Analyzing the mean cross-section according to the section measurement parts, no difference existed in shoulder part and under bust part. However, in upper bust, bust, waist, abdomen, high hip, and hip parts, a significant difference existed. Also, according to the results of the mean cross-section as well as the average cross overlap section for each somatotype, there was a significant difference among the four somatotypes. Thus, Abdomen-fat Group and Fat Group were similar, while Bend-forward Group and Average Group were alike. According to the increase of age, lower body tended to have more conspicuous changes. Analyzing the profile of somatotypes, there existed a obvious significant difference among the 4 somatotypes, implying that the characteristics of somatotype need to be reflected when to develop dress forms for elderly women. Therefore, these differences must be an essential factor in pattern design. Comparing the current dress form with the dress form developed with simulation, we could find that a dress form developed for elderly women which reflects the characteristics of body shape is much better than a dress form developed by simple size variation such as small, medium and large size divisions to improve the fit of garments and pattern designs.

• 한국CDE학회논문집
• /
• 제5권4호
• /
• pp.336-346
• /
• 2000

This paper presents a geometric method that can detect and compute all conic sections in the intersection of two tori. Conic sections contained in a torus must be circles. Thus, when two tori intersect in a conic section, the intersection curve must be a circle as well. Circles in a torus are classified into profile circles, cross-sectional circlet, and Yvone-Villarceau circles. Based on a geometric classification of these circles, we present a procedural method that can detect and construct all intersection circles between two tori. All computations can be carried out using simple geometric operations only: e.g., circle-circle intersections, circle-line intersections, vector additions, and inner products. Consequently, this simple structure makes our algorithm robust and efficient, which is an important advantage of our geometric approach over other conventional methods of surface intersection.

• 한국진공학회지
• /
• 제8권1호
• /
• pp.1-8
• /
• 1999

형태와 진공특성이 다른 여러 용기와 도관들로 구성된 진공네트웍의 압력분포를 계산할 때 단면이 서로 틀린 요소들의 연결부에서 입출구효과에 의해 발생하는 압력강하를 기체가 흐르는 방향에 상관없이 자동적으로 고려할 수 있는 경계조건을 만들었다. 또 원추형 도관처럼 단면이 변화하는 요소를 포함하고 있는 경우 시스템이 방향성을 가지지 않도록 도관 내에서의 압력강하를 보정하는 방법에 대해 소개한다. 개발된 경계조건을 간단한 예제 진공시스템에 적용하여 입자평형식에 근거를 둔 연립방정식을 작성하고 해를 구하는 과정을 구체적으로 설명한다.

• 한국지역지리학회지
• /
• 제16권2호
• /
• pp.100-109
• /
• 2010

미국 메사추세츠주 보스턴시의 네폰셋 강의 서로 다른 토지이용지역을 사례지역으로 선정하여, 강의 밑짐으로 토지이용의 차이를 분석할 수 있는지 실험하였다. 네폰셋 강은 거주지역, 산업지역, 농업과 삼림지역 등으로 토지이용이 구분되는데, 토질의 화학적 특성이 가장 차이가 나는 거주지역과 삼림지역 두 곳을 찾아 매닝의 'n'값과 HEC-RAS 모델의 결과치를 비교하여 두 지역의 차이를 분석하였다. HEC-RAS는 US Army Corp에서 개발한 모델로 강의 윤곽 및 흐름, 진행 및 경사 등을 면밀하게 분석할 수 있다. 거주지역 분석 결과는 매닝의 계수와 HEC-RAS 결과치가 매우 다르게 나타나는데, 이는 인공적으로 설치된 강 하류의 댐과 일반적이지 않은 경사에 기인한다고 판단되었다. 일반적인 경사를 지닌 댐상류에는 임계수위가 나타나는데, 매닝의 'n' 계수가 서로 다른 깊이를 반영해주고 있다. 댐은 강의 분리와 유속에 많은 영향을 미치고 있고, 상류 수위는 증가하는 대신 유속은 감소하게 된다. HEC-RAS 모델은 강의 구조와 형태 및 행태 등을 분석하는데 좋은 기법으로, 현재 많은 연구의 대상이 되고 있는 도시 내 강의 관리와 지역개발에 지리학적으로도 크게 활용할 수 있을 것이라 예상된다.

• 한국유체기계학회 논문집
• /
• 제16권1호
• /
• pp.5-10
• /
• 2013

The performance of screw air compressor is affected by rotor profile, lobe number, air end wrap angle, rotor L/D ratio, suction and discharge ports, revolutions of air end and load regulation control, etc. In general, an efficient screw compressor needs a rotor profile of which has a large flow cross-section area, short sealing lines and a small blow-hole. In this study, experimental study was performed with newly designed $5{\times}6$ rotor profile and various shapes of air end. Results show that the measured specific power consumption of the newly designed screw compressor appeared to be lower than any other published data for the equivalent screw compressors manufactured.

• 대한전기학회논문지
• /
• 제41권2호
• /
• pp.209-216
• /
• 1992

Deafs train articulation by observing mouth of a tutor, sensing tactually the motions of the vocal organs, or using speech training aids. Present speech training aids for deafs can measure only single speech parameter, or display only frequency spectra in histogram of pseudo-color. In this study, a speech training aids that can display subject's articulation in the form of a cross section of the vocal organs and other speech parameters together in a single system is to be developed and this system makes a subject know where to correct. For our objective, first, speech production mechanism is assumed to be AR model in order to estimate articulatory motions of the vocal organs from speech signal. Next, a vocal tract profile model using LP analysis is made up. And using this model, articulatory motions for Korean vowels are estimated and displayed in the vocal tract profile graphics.