• Journal of Food Hygiene and Safety
• /
• v.36 no.4
• /
• pp.298-309
• /
• 2021

In this study we sought to develop a simultaneous analysis method for cis-bixin and cis-norbixin, the main components, to detect annatto pigment in food. To establish the optimal test method, the HPLC analysis methods of the European Food Safety Authority (EFSA), Japan's Ministry of Health, Labor and Welfare (MHLW), and National Institute of Food and Drug Safety Evaluation (NIFDS) were compared and reviewed. In addition, a new pretreatment method applicable to various foods was developed after selecting conditions for simultaneous high-performance liquid chromatography (HPLC) analysis in consideration of linearity, limit of detection (LOD), limit of quantification (LOQ), and analysis time. The HPLC analysis method of NIFDS showed the best linearity (R² ≥ 0.999), exhibiting low detection and quantification limits for cis-norbixin and cis-bixin as 0.03, 0.05 ㎍/mL, and 0.097, 0.16 ㎍/mL, respectively. All previously reported pretreatment methods had limitations in various food applications. However, the new pretreatment method showed a high recovery rate for all three main food groups of fish meat and meat products, processed cheese and beverages. This method showed an excellent simultaneous recovery rate of 98% or more for cis-bixin and cis-norbixin. The HPLC analysis method with a new pretreatment method showed high linearity with a coefficient of determination (R²) of 1 for both substances, and the accuracy (recovery rate) and precision (%RSD) were 98% and between 0.4-7.9, respectively. From this result, the optimized analytical method was considered to be very suitable for the simultaneous analysis of cis-bixin and cis-norbixin, two main components of annatto pigment in food.

• Journal of Food Hygiene and Safety
• /
• v.34 no.5
• /
• pp.438-446
• /
• 2019

In this study, the nutrients of a total of 4 species of popcorn, Oryun Popcorn, Oryun Popcorn 2, G-Popcorn and Gichan Popcorn, cultivated in Gangwon-do, were analyzed and compared. The contents of these products, including their general ingredients, inorganic substances, fatty acids, reducing sugar and starch, were analyzed. The moisture, crude ash and crude fat content of the dried popcorn species were 11.54-12.54%, 0.97-1.45% and 2.48-2.62%, respectively. The crude protein content was 9.68-11.75%. As for inorganic substances, the potassium and phosphorus content were the highest. Potassium was 228.25-310.46 mg/100g and was the highest in Oryun Popcorn, and the content of phosphorus was 276.04-310.00 mg/100g. As for fatty acids, 11 types were detected. The content of linoleic acid accounted for 52.89-55.76% of the total fatty acid content showing the highest amount followed by oleic acid (24.31-26.65%) and palmitic acid (14.20-15.92%). As for amino acids, total 16 types of amino acids were detected by specie, with glutamic acid making up 17.70-18.52% of total amino acids, the highest, followed by leucine (12.30-12.54%) and proline (10.34-10.92%) in that order. The creducing sugar content by specie was 4.68-5.13% and starch content was 42.14-46.14%.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.23-43
• /
• 2021

In this study, we selected two essential oils, Citrus unshiu and Cinnamomum cassia with superior antioxidant effects from the essential oils of 7 wild plants in South Korea and examined their antimicrobial activity against Candida albicans, which causes dermatitis to identify the antimicrobial components in the essential oils. As a result of measuring DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity, SC50 value of the Citrus unshiu essential oil was 0.010 mg/mL, while for the Cinnamomum cassia essential oil, SC50 value was 0.09 mg/mL. In addition, when ABTS (2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activity was measured, SC50 value of the Citrus unshiu essential oil was 0.09 mg/mL, while for the Cinnamomum cassia essential oil, it was 0.06 mg/mL, exhibiting high antioxidant activity. For the minimum inhibitory concentration (MIC), the essential oil of Cinnamomum cassia was 1.25 mg/mL and that of Citrus unshiu was 5 mg/mL, demonstrating a high antimicrobial activity of the Cinnamomum cassia essential oil. Through the thin layer chromatography (TLC) bioassay, we assessed the antimicrobial activity against C. albicans according to the fraction components of the two essential oils. Also, by using preparative TLC (prep. TLC), we obtained the active fractions, and by performing GC/MS analysis of the components with the same Rf value, we identified the antimicrobial-active components. As a result, the main components having antioxidant and antimicrobial activities were cinnamyl acetate, eucalyptol, linalool, and citral of the Cinnamomum cassia essential oil and linalool from the Citrus unshiu essential oil. Also, based on the analysis of the fractional components that showed antioxidant and antimicrobial activities in both of the two essential oils, it was found that linalool has antioxidant activity, while cinnamyl acetate, eucalyptol, citral, and geranyl acetate have antioxidant and antimicrobial activities.

• Land and Housing Review
• /
• v.13 no.4
• /
• pp.55-71
• /
• 2022

Recently, the domestic department store industry is growing into a complex shopping cultural space, which is advanced and differentiated by changes in consumption patterns. In addition, competition is intensifying across 70 places operated by five large companies. This study investigates the determinants of the visits to department stores using the big data concept's automatic vehicle access system (pos) and proposes how to strengthen the competitiveness of the department store industry. We use a negative binomial regression test to predict the frequency of visits to 67 branches, except for three branches whose annual sales were incomplete due to the new opening in 2021. The results show that the demand for visiting department stores is positively associated with airport, terminal, and train stations, land areas, parking lots, VIP lounge numbers, luxury store ratio, F&B store numbers, non-commercial areas, and hotels. We suggest four strategies to enhance the competitiveness of domestic department stores. First, department store consumers have a high preference for luxury brands. Therefore, department stores need to form their own overseas buyer teams to discover and attract new luxury brands and attract customers who have a high demand for luxury brands. In addition, to attract consumers with high purchasing power and loyalty, it is necessary to provide more differentiated products and services for VIP customers than before. Second, it is desirable to focus on transportation hub areas such as train stations, airports, and terminals in Gyeonggi and Incheon. Third, department stores should attract tenants who can satisfy customers, given that key tenants are an important component of advanced shopping centers for department stores. Finally, the department store, a top-end shopping center, should be developed as a space with differentiated shopping, culture, dining out, and leisure services, such as "The Hyundai", which opened in 2021, to ensure future growth potential.

• Journal of Korea Foundry Society
• /
• v.41 no.2
• /
• pp.144-152
• /
• 2021

Based on the analysis of the current state of the world's foundry industry, we looked at the international competitiveness of Korea's foundry industry for the past 20 years. Korea's total foundry production is 2.52 million tons, and the production per company (so-called productivity) is 2,831 tons, which is the eighth largest in the world and down one position for the case of total foundry production, while productivity remains its position compared to three years ago. Korea is the only one of the top 10 foundry to see a decline in production. Similar to the global situation, Korean products consist of 38% of grey csat iron, 31% of ductile cast iron, 15% of aluminum, and 9% of cast steel. In order to obtain statistics on Korea's foundry industry, the survey conducted a service project for approximately nine months from April 2020. Various statistical surveys and sample in-depth surveys by the Korean standard industry class were evaluated for various contents of the domestic casting industry. We also looked at the number of companies, the distribution by region, the number of workers and the percentage of foreigners, and the distribution of each job, as well as the R&D investment status according to the size of the enterprise. Together, sales, exports, sales and various profit ratios were analyzed to measure the earning power of foundry industry. In addition, the classification by grouping the foundry industry according to the process utilized by focusing on each company, and to determine the sales, exports, and yield status for each process was also investigated on the basis. Based on these data, the domestic foundry industry has presented a variety of offers for the following issues for sustainable growth; global ranking, marginal corporate restructuring, training of domestic technical people, differentiated support policies by company size and process.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.10-24
• /
• 2021

Purpose: The purpose of this study is to determine the dangers of biodiesel and general diesel mixtures currently used as alternative fuels by equipment (tag method and penski Marten method) and to determine the difference between flash point and combustion point (closed, open) according to test methods. It is intended to be used as a reference material for identification and evaluation of firecausing substances by confirming the risk of mixtures by comparative analysis and measurement, and establishing a risk assessment method for chemical substances. Method: Flash point test method and result treatment were tested based on ASTM and KS M mode, which are tag sealing and pen schematense test methods used as flash point and combustion point test methods for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was a test equipment that satisfies the test standards of KS M 2010 with equipment produced by TANAKA of Japan. The flash point and combustion point were measured, and the flash point according to the test method of biodiesel and general diesel mixture ( Closed, open), and the ignition point of a mixture of biodiesel and general diesel was compared and analyzed for ignition risk compared with conventional diesel. Results: Looking at the experimental results, first, as an analysis of the risk of flammability of the mixture, the flash point of a substance containing 70% biodiesel was found to be about 92℃ based on general diesel with a flash point of 64.5℃, and gasoline and biodiesel or When the biodiesel mixture was synthesized, it was confirmed that the flash point tends to decrease. In addition, the difference between the flash point and the combustion point was analyzed as about 20 ~ 30℃, and when a small amount of gasoline or methanol was mixed, the flash point was lowered, but it was confirmed that the combustion point was similar to that of the existing mixture. Conclusion: In this study, in order to secure the effectiveness of the details of the criteria for judging dangerous materials in the existing Dangerous Materials Safety Management Act, and to secure the reliability and reproducibility of the judgment of dangerous materials, we confirm the criteria for judging the risk of the mixture through an experimental study on flammable mixtures. It will be able to provide reference data for experimental criteria for flammable liquids that are regulated in the field. In addition, if this study accumulates know-how on experiment by test method, it is expected that it can be used as a basis for research on risk assessment and research on dangerous goods.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.701-711
• /
• 2020

Purpose: In this study, the risk of flammability of a liquid mixture was experimentally confirmed because the purpose of this study was to confirm the increase or decrease of the flammability risk in a mixture of two substances (combustible+combustible) and to present the risk of the mixture. Method: Flash point test method and result processing were tested based on KS M 2010-2008, a tag sealing test method used as a flash point test method for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was Japan's TANAKA. The flash point was measured with a test equipment that satisfies the test standards of KS M 2010 with equipment produced by the company, and LP gas was used as the ignition source and water as the cooling water. In addition, when measuring the flash point, the temperature of the cooling water was tested using cooling water of about 2℃. Results: First of all, in the case of flammable + combustible mixtures, there was little change in flash point if the flash point difference between the two substances was not large, and if the flash point difference between the two substances was low, the flash point tended to increase as the number of substances with high flash point increased. However, in the case of toluene and methanol, the flash point of the mixture was lower than that of the material with a lower flash point. Also, in the case of a paint thinner, it was not easy to predict the flash point of the material because it was composed of a mixture, but as a result of experimental measurement, it was measured between -24℃ and 7℃. Conclusion: The results of this study are to determine the risk of mixtures through experimental studies on flammable mixtures for the purpose of securing the effectiveness of the details of the criteria for determining dangerous goods in the existing dangerous goods safety management method and securing the reliability and reproducibility of the determination of dangerous goods Criteria have been presented, and reference data on experimental criteria for flammable liquids that are regulated in firefighting sites can be provided. In addition, if this study accumulates know-how on differences in test methods, it is expected that it can be used as a basis for research on risk assessment of dangerous goods and as a basis for research on dangerous goods determination.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.178-184
• /
• 2011

In this study, the antibacterial, antioxidative and inhibitory effects of Allium cepa peel extracts on tyrosinase and elastase were investigated. MIC values of the ethyl acetate fraction of Allium cepa peel on especially, S. aureus among the skin resident flora (Staphylococcus aureus, S. aureus; Propionibacterium acnes, P. acnes; Pityrosporum ovale, P. ovale; Escherichia coli, E. coli) were 0.06%. The aglycone fraction showed more excellent free radical (1,1-diphenyl-2-picrylhydrazyl radical, DPPH) scavenging activity ($FSC_{50}=5.05{\mu}g/mL$). Reactive oxygen species (ROS) scavenging activities ($OSC_{50}$) of the ethyl acetate fraction and aglycone fraction in the luminol-dependent $Fe^{3+}-EDTA/H_2O_2$ system were 0.05 and $0.03{\mu}g/mL$, respectively. The cellular protective effect of the aglycone fraction on the rose-bengal sensitized photohemolysis of human erythrocytes exhibited more prominent (${\tau}_{50}$, 480 min at $25{\mu}g/mL$). The inhibitory effects ($IC_{50}$) of the ethyl acetate fraction and aglycone fraction on tyrosinase were 9.16 and $8.68{\mu}g/mL$, the inhibitory effect ($IC_{50}$) of the aglycone fraction on elastase was $14.12{\mu}g/mL$ The transepidermal water loss of the cream containing 0.1% ethyl acetate fraction was decreased from $8.3g/m^2h$ in control to $6.8g/m^2h$ in the subjects applied with cream containing the ethyl acetate fraction. These results indicate that extract/fractions of Allium cepa peel can function as antioxidant in biological systems, particularly skin exposed to UV radiation by scavenging $^1O_2$ and other ROS, and protect cellular membranes against ROS, and possibly as antiaging agents. Allium cepa peel extract could be used as a new cosmeceutical for whitening and anti-wrinkle products.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.591-597
• /
• 2011

Forest carbon stock changes in a national forest were assessed by CBM-CFS3 model with different management scenarios to support decision making for a long term forest planning. Management scenarios were composed with 4 different levels of timber harvesting - current harvesting level (scenario1), 30% increment in each period (scenario2), 3 times increment (scenario3), and 5 times increment (scenario4). For each scenarios, changes in total carbon stocks, carbon stocks of each carbon pools, carbon stocks of harvested wood products (HWP) and age class structure were estimated over 100-year planning horizon. The estimated total carbon stock including HWP at the end of final period (100 years) was 433.1 tC/ha under scenario 1, but the age class structure has skewed right to the upper classes, which is not desirable for sustainable forest management. Under the scenario 4, however, the total carbon stock decrease to 385.5 tC/ha and the area of old growth forest show a significant decline. The estimated total carbon stock under scenario 2 and 3 were 411.7 tC/ha and 410.5 tC/ha respectively, and it was able to maintain the initial level of the forest carbon stocks during the planning horizon. Also the age class structures under the scenario 2 and 3 were evenly distributed from class 1 to class 8. Overall, scenario 2 and 3 were the most acceptable forest management options, in terms of carbon stock changes and age class structure.

• Food Science and Industry
• /
• v.53 no.1
• /
• pp.2-32
• /
• 2020

In recent years, significant importance has been given to chitooligosaccharides (COS) due to its potent notable biological applications. COS can be derived from chitosan which is commonly produced by partially hydrolyzed products from crustacean shells. In order to produce COS, there are several approaches including chemical and enzymatic methods which are the two most common choices. In this regard, several new methods were intended to be promoted which use the enzymatic hydrolysis with a lower cost and desired properties. Hence, the dual reactor system has gained more attention than other newly developed technologies. Enzymatic hydrolysis derived COS possesses important biological activities such as anticancer, antioxidant, anti-hypersentive, anti-dementia (Altzheimer's disease), anti-diabeties, anti-allergy, anti-inflammatory, etc. Results strongly suggest that properties of COS can be potential materials for nutraceutical, pharmaceutical, and cosmeceutical product development.