• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.3
• /
• pp.274-279
• /
• 2008

Roll to roll (R2R) manufacturing process, also known as 'web processing', has been tried for producing electronic devices on a flexible plastic or metal foil. To increase the performance and productivity the R2R process, effective control and on-line supervision for web quality becomes very important. Wrinkle is one of the defects, which is incurred due to compressive stresses. A system for on-line measurement of wrinkle is developed using area scan camera and machine vision laser. The 2D image, obtained by area scan camera, is produced by Gaussian regression method to characterize the wrinkle on a transparent web. The experiment proves that 0.3mm wrinkle height can be measured successfully with 74fps.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.48
• /
• pp.201-211
• /
• 1998

The fundamental object of work measurement is to precisely establish the time standards, which are the indices of labor productivity. This study discussed the development of robot work measurement method that could establish the time standard effectively. In manufacturing industries the various robot tasks are generally classified and standardized by the unit motions. The Robot Modularization of the Unit Motion (ROMUM) was realized by the module of two steps GET and PUT unit motions. This method reduced time and effort of analysis, and could be done with ease. Therefore, ROMUM will increase the convenience of use for the unskilled worker and decrease the time required, cost and errors. And, it will contribute to reduce the unnecessary motion by robot motion analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.917-921
• /
• 2000

One of the major limitations of productivity and quality in machining is machining accuracy of the machine tools. The machining accuracy is affected by geometric, volumetric errors of the machine tools. This paper suggests the enhancement method of machining accuracy for precision machining of high quality metal reflection mirror or optics lens, etc. In this paper, we study 1) the compensation of linear pitch error with NC controller compensation function using laser interferometer measurement, 2) the method for enhancing the accuracy of NC milling machining by modeling and compensation of volumetric error, 3) the generation of the parabolic face profile. And the method is verified by the parabolic face machining experiment with a vertical three axes NC milling machine. After this study, we will inspect using On-machine measurement and study the repetitive machining by a compensated path

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.59-60
• /
• 2012

A large-scale construction project relies much on the efficiency of construction equipment. Therefore, efficient and accurate measurement on the productivity of construction equipment is one of important task in the construction industry. Based on the motivation, this paper proposes a 11-axis composite sensor for an automatic measurement of construction equipment. A 11-axis composite sensor is composed of a gyroscope, geomagnetic and accelerometer sensor for the purpose of real-time motion captures of construction equipment. It is expected that the proposed system can save considerable time, effort and cost of measuring a efficiency of construction equipment.

• Industrial Engineering and Management Systems
• /
• v.2 no.1
• /
• pp.55-62
• /
• 2003

This paper deals with the difficulties involved in analyzing and designing a management system to reduce the risks and improve the productivity of new product development. In this paper, a method is described to analyze user information and determine product specifications based on a stimulus-response model, the conjoint measurement of users needs, and product characteristics deployment. The proposed method can analyze the effect of a partial price on the contribution ratio based on the order of preference of product profiles through a smaller number of product profiles. The strengths and weaknesses of this method are examined as the method is applied to the case study of a mobile computer intended for personal use.

• Journal of the korean society of oceanography
• /
• v.35 no.1
• /
• pp.34-45
• /
• 2000

Spatial distributions of phytoplankton biomass and nutrients were examined to investigate the magnitude of phytoplankton blooms along the marginal ice zone (MIZ) in the northwestern Weddell Sea during austral summer of 1995. High phytoplankton biomass was associated with the MIZ in the study area. Vertical stability induced by meltwater appears to be the most important factor controlling phytoplankton biomass distribution. Nitrate concentrations are significantly depleted within the upper water column at the phytoplankton biomass maximum. The time required to attain the observed nutrient depletion was calculated from phytoplankton biomass and nitrate depletion, which ranges from 27 to 68 days in transect 4 and from 33 to 145 days in transect 3. Phytoplankton production was also calculated from nitrate depletion and time-scales of nitrate depletion, which varies from 272 to 1752 mg C m$^{-2}$ day$^{-1}$ in transect 4 and from 327 to 2648 mg C m$^{-2}$ day$^{-1}$ in transect 3. In the Southern Ocean where primary productivity shows large temporal and spatial variations, the productivity measurement from nutrient depletion can provide an average rate of primary production during phytoplankton bloom.

• Journal of Surface Science and Engineering
• /
• v.57 no.3
• /
• pp.208-213
• /
• 2024

With the development of industry, miniaturization and densification of semiconductor components are rapidly progressing. Particularly, as demand surges across various sectors, efficiency in productivity has emerged as a crucial issue in semiconductor component manufacturing. Maximizing semiconductor productivity requires real-time monitoring of semiconductor processes and continuous reflection of the results to stabilize processes. However, various unexpected variables and errors in judgment that occur during the process can cause significant losses in semiconductor productivity. Therefore, while the development of a reliable manufacturing system is important, the importance of developing sensor technology that can complement this and accurately monitor the process is also growing. In this study, conducted a basic research on the concept of diagnostic sensors for thickness based on the physical changes of thin films due to etching. It observed changes in resistance corresponding to variations in thin film thickness as etching processes progressed, and conducted research on the correlation between these physical changes and thickness variations. Furthermore, to assess the reliability of thin film thickness measurement sensors, it conducted multiple measurements and comparative analyses of physical changes in thin films according to various thicknesses.

• Journal of Environmental Science International
• /
• v.33 no.1
• /
• pp.59-65
• /
• 2024

The objective of this study were to assess rooftop urban agriculture and analyze the differences in soil, growth, physiology, and productivity to elucidate the effect of companion planting with various plants, including lettuce (Lactuca sativa), rosemary (Salvia rosmarinus), marigold (Tagetes patula), Korean perilla (Perilla frutescens), and garlic chives (Allium senescens). Measurements were taken every other week from May to August 2023, totaling eight measurement. Regarding the characteristics of the soil planted with lettuce and aromatic plants, the combined planting of lettuce and garlic chives created a favorable soil environment for plant growth. Consequently, the best growth was observed when lettuce and garlic chives were companion planted. Companion planting of lettuce and garlic chives appears to be the most efficient concerning growth and physiology. The productivity of companion planting lettuce and aromatic plants also showed high-quality lettuce when lettuces and garlic chives were companion planted. Therefore, companion planting of lettuces and garlic chives in rooftop urban agriculture is suitable for growth, physiology, and productivity.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.3
• /
• pp.109-117
• /
• 2013

This study designed a "Diagnostic Model for Management Innovation of Medium Enterprises" based on the theoretical background of success factor and management diagnosis model for management innovation of medium enterprises and suggested a measure for utilization of strategic subject and diagnostic model that enterprises can apply. Utilization of medium enterprises management innovation diagnostic model designed through this study would be of help for making a diagnosis of the capability maturity level of enterprises' current management system and improving it by establishing a challenging capability objective and building a circulation system capable of innovating enterprises. It is expected for enterprises to overcome growing pains and establish a management system capable of achieving outcome (productivity) by repeating measurement and innovation through management diagnosis. In addition, this study provides a method to produce a strategic subject, select priority of implementation and prepare an implementation road map by classifying and filtering management issues produced as a result of management diagnosis in a systematic way. If variables necessary for production of an objective weighted value of scoring and discover of elements for category of diagnostic model and elementary items as well as design of a self-diagnosis questionnaire, measurement of management outcome suggested in this study can be able to be verified and supplemented through case study in the future, it is expected to make the degree of completion as a diagnostic model elevated that may help for growth and development through innovation of medium enterprises.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.40-45
• /
• 2004

Recently, aspheric optical lenses and mirrors, which are harder to manufacture and measure than the conventional spherical ones, are widely used, particularly in electronic fabrication process. Generally, interferometric optical method is used for the measurement of spherical optical surface. However, the interferometric method for aspheric surface measurement is difficult because it needs a precise null corrector and strict environmental conditions such as constant temperature, humidity and vibrations. We have been studied on the manufacturing of aspheric optics to improve the surface profile accuracy and productivity using a corrective polishing process. For the corrective polishing, a practical method of On-Machine Measurement (OMM) is required. For this purpose, an optical OMM system has been studied using the Shach-Hartmann test, which is very robust to the practical polishing environment. The wavefront has been reconstructed from the measured data using the primary aberration polynomial function by the least squares fitting. The measured result of the OMM system shows that the maximum deviation is less than 200 nm for the one of commercial Fizeau interferometer Wyko 6000.