• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제18권2호
• /
• pp.123-139
• /
• 2015

본 연구의 목적은 수학 수업에서 생산적 실패를 한 경험이 초등학생들의 수학적 문제해결력과 수학적 성향에 미치는 영향을 알아보는 것이다. 이를 위해 선행 연구를 바탕으로 생산적 실패를 경험할 수 있도록 수업 과정을 고안하였다. 연구대상으로 서울 은평구 Y초등학교 4학년 2개 학급을 선정하여 실험반은 생산적 실패를 활용한 수업을 진행하였으며, 비교반은 전통적인 강의식 수업을 진행하였다. 사전 사후 검사로 수학 개념이해 검사, 다양한 수학적 문제해결력 검사, 수학적 성향 검사를 실시하여 각각 t-검정하였으며, 학생들의 토의과정 및 활동지, 면담 등을 활용하여 수학적 문제해결력과 성향을 질적으로 분석하였다. 그 결과 생산적 실패를 경험한 학생들의 문제해결력과 수학적 성향에 유의미하게 개선되는 효과를 보였다. 이는 학생들이 실패를 통해 수학 개념을 스스로 구성하면서 보다 명확한 이해를 하는 과정에서 긍정적인 효과를 가져 온 것으로 보인다. 심층적인 추후 연구로 수학교과서 개발 및 수업 방법 개선에서 이를 활용해야 함을 제안하였다.

• 한국사회복지학
• /
• 제49권
• /
• pp.162-189
• /
• 2002

In general, every welfare state is to be productive. If not, the welfare state itself cannot be sustainable because resource for the development of welfare only comes from a sound level of economic development However, how to mix welfare and production differs from country to country. This article tackles this phenomenon as a starting point. Granted, contemporary studies of comparative welfare state often starts from the theory of welfare regime which has been suggested by Esping-Andersen. This article also regards the framework as an analytic tool to elaborate upon the concept of productive welfare and to categorize different types of conception of productive welfare. In liberal regime, the concept is so narrowly interpreted that they emphasize micro-efficiency of specific welfare programs. On the contrary, the other two regime types recognize the concept of productive welfare as relatively wide. Therefore, conservative and social democratic regimes underscore macro-efficiency of the welfare state as a whole. Empirical analyses of this article explores each regime's success and failure in terms of achieving fundamental goals of the welfare state, i.e. economic development and enhancement of equality. A series of evidence show that liberal regime fails in achieving both goals, while the other two regimes seem to be relatively successful. In conclusion, it may be pointed out that current tendency of neo-liberalism and anti-welfarism in Korea should be overcome, which must be the prime task of social welfare academia of this country.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2023년도 제67차 동계학술대회논문집 31권1호
• /
• pp.217-218
• /
• 2023

인공지능은 디지털 대전환 시대의 핵심적인 기술로 사회 전반에 변화를 주도하였다. 우리나라는 인공지능을 이해하고 이를 활용하는 역량을 길러주기 위해 전 국민을 대상으로 교육을 진행하고 있다. 그러나 초등학생 대상 인공지능 교육 프로그램은 체험 및 놀이 실습으로 한정되어 교육적 효과에 한계가 있다. 그러므로 본 연구에서는 생산적 실패를 활용하여 인공지능에 대한 개념적 이해 및 실생활 전이를 촉진하는 교육 프로그램을 개발하였다. 연구 대상은 초등학교 5~6학년이며 2022 개정 교육과정에서 강조하는 자기 주도적 학습 역량과 실생활 연계 교육을 반영하여 설계한 6차시 분량의 프로그램이다. 본 연구에서 개발한 교육 프로그램은 향후 타당성 및 신뢰도 검증을 거쳐 현장에 적용하는 후속 연구로 이어질 것이다.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.121-130
• /
• 1998

In recent years, a number of metal machine parts, in the field of the car manufactures and electronic goods for home, have been replaced by nylon-6 in order to weight, cost, and a period of process of manufacture. It's because nylon-6 materials as an industrial material have higher economical and productive advantage than the metalic ones. However, in domestic injection manufactures, there are few data on fiber glass synthetic on nylon-6. It is said that plastic in process of manufacture using the same injection materials make their results different in large scale according to fiber glass synthetic rate conditions. In this study, we have studied effects of the glass fiber synthetic rate on the characteristics of fatigue failure for nylon-6.

• 대한안전경영과학회지
• /
• 제17권1호
• /
• pp.321-335
• /
• 2015

This study introduces the methods to apply and develop the integrated Cost of Quality (COQ) and Time-Driven Activity-Based Costing (TDABC) model for seeking not only quality improvement but also reduction of overhead cost. Inefficient and uneconomical COQ activities can be identified by using time driver which also maximizes the quality improvement for Prevention-Appraisal- Failure (PAF) quality costs. In contrast, reduction of the indirect cost of unused capacity resource using Quality Cost Capacity Ratio (QCCR) of TDABC minimizes overhead cost for COQ activities. In addition, linkage between Overall Equipment Effective (OEE) and Time Driver develops the integrated system of Total Productive Maintenance (TPM) and TDABC model. Lean OEE maximizes when an Unused Time (UT) of TDABC that are TPM losses and lean wastes reduces whereas the TPM Cost Capacity Ratio (TCCR) of TDABC minimizes indirect cost for non-value added TPM activities. Numerical examples are derived to better understand the proposed COQ/TDABC model and TPM/TDABC model from this paper. From the proposed model, process mapping and time driver of TDABC are known to lessen indirect cost from general ledger of comprehensive income statement with a better quality innovation and improvement of equipment.

• 대한안전경영과학회지
• /
• 제9권2호
• /
• pp.195-214
• /
• 2007

The purpose of this study is to explore the applicability of AHP(Analytic Hierarchy Process) to select more productive projects among various proposed projects in a particular company. To achieve this research objective, the characteristics of project evaluation and selection are first reviewed with respect to when, where, and how the decision is made. Then the theoretical basis of the AHP is briefly reviewed along with its mathematical underpinnings to construct the framework of project evaluation and selection. To be more specific, the evaluation and selection criteria were reorganized in the AHP-based framework to make the process of project evaluation and selection more productive. Project evaluation and selection is one of the most important activities for the most companies to be more advantageous in the market. Despite the importance of decision making process of project selection, not many of how to choose the best project were suggested as the reliable project selection methods in the industries. It may be because it involves various activities related to conflict resolution among different evaluation criteria, high uncertainties of market, and the unclear tradeoff among various project objectives. Furthermore, the decision, once made at this point, tends to be irrevocable until the whole process turns out to be a complete success or failure. As the result, the AHP method showed better financial performance rather than the traditional method in a case study.

• 한국경영과학회지
• /
• 제3권1호
• /
• pp.57-67
• /
• 1978

This paper reviews various models of technological innovations at different levels: project level and productive segment level. Firstly, it examines a number of significant factors influencing the success and failure of technological innovation at project level. Specifically, the role and characteristics of technical information for the success of innovation is analyzed. Secondly, the paper discusses in detail the relationship between technological innovation and the evolution of a firm. Product and process innovations are analyzed in accordance with a three stage model; the stages are performance maximizing (uncoordinated), sales maximizing (segmental) and cost minimizing (systemic). Various implications of the model are presented in terms of the business policy variables such as diversification, standardization, productivity improvement, marketing, etc. The applicability of the model to a developing country is sought and a few suggestions to develop new model of technological innovations in LDC are discussed.

• Tuberculosis and Respiratory Diseases
• /
• 제79권3호
• /
• pp.179-183
• /
• 2016

A 59-year-old man presented with acute dyspnea following sudden productive cough and expectoration of a full cup of "blood-tinged" sputum. He had been diagnosed with hepatitis B virus-related hepatocellular carcinoma and had received transarterial chemoembolization 5 years ago for a 20-cm hepatic mass; he denied any history of hematemesis and the last esophagogastroduodenoscopy from a year ago showed absence of varix. Chest computed tomography (CT) with angiography showed new appearance of right basal lung consolidation but no bleeding focus. Despite the use of systemic antibiotics, the patient developed respiratory failure on day 7 of hospitalization. After intubation, a massive amount of brown sputum with anchovy-paste-like consistency was suctioned via the endotracheal tube. Bronchoscopic toileting was performed and the patient was extubated. In the ward, he continued to expectorate the brown sputum. On day 25 of hospitalization, a repeat CT scan showed simultaneous disappearance of the pneumonic consolidation and the necrotic fluid within the hepatic mass, suggesting the presence of a fistula. He has continued to receive systemic antibiotics, sorafenib, and entecavir, and follow up by respiratory and hepato-oncology specialists.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1303-1310
• /
• 1999

In this paper, the Timed Petri-Nets(TPN) modeling of Modular Cell Manufacturing Systems(MCMS) was investigated to overcome the limit of batch mode operation, which has been one of the most popular manufacturing types to produce an extensive industrial output and to be able to adopt to suitable and quickly changing manufacturing environments. A model of the MCMS was developed in reference to the actual TFT-LCD manufacturing system. TFT-LCD manufacturing system is not mass-productive in batch mode, but it operates in the form of MCMS which consists of a sequence of several cells with four processes of operation, including those of color filter(C/F), TFT, cell, and module. The cell process is further regrouped in those of Front-End and Back-End. For the Back-End cell process, it is reconstructed into a virtual model, consisting of three cells. The TPN modeling encompasses those properties, such as states and operations of machines, the number of buffers, and the processing time. The performance of the modeling was further examined in terms of scheduling system. The productivity in each cells was examined with respect to the change of failure rate of the cell machines and Automatic Guided Vehicles(AGV) using simulation by TPN.

• International Journal of Quality Innovation
• /
• 제6권2호
• /
• pp.59-89
• /
• 2005

Manufacturing Resources Planning (MRPII) is one kind of manufacturing information system that can help manufacturing companies gain competitive advantages. It is estimated that more than one hundred MRPII systems are available in the market, many of them are mature enough to solve most operational issues in accordance with users' requirements. More often than not, many of these systems provide more functions than a company expects. Manufacturing companies worldwide have attempted to implement these MRPII systems, however, many companies experienced failure (Turbide, 1996) due to managerial rather than technical issues. The authors propose an approach utilising a roadmap to integrate BPR and the MRPII implementation in order to overcome this difficulty. A detail road map is developed to guide this implementation, which is designed using a hierarchical analysis technique known as Integrated DEFinition Method (IDEF). IDEF is a systematic manufacturing management and integration-modeling tool. The proposed approach is implemented and illustrated using a reference company and the results indicated that 66% reduction in errors for maintaining the bills of materials system; 99% reduction in time to carry out material requirement planning; and 70% reduction in time previously taken for non-productive discussions.