• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.121.1-121.1
• /
• 2014

Recently, much attention has been given to plasma production under liquid and its applications [1]. However, most of plasma production techniques reported so far utilize high voltage dc, ac, rf or microwave power [2], where damage to discharge electrodes and small discharge volume are remained issues. As an alternative of plasma production method under liquid, we have proposed pulsed microwave excited plasma using slot antenna, where damage to the slot electrode can be minimized and plasma volume can be increased. We have also reported improvement of treatment efficiency with use of reduced-pressure condition during the discharge [3]. To realize low pressure conditions in liquid, various alternative technique can be considered. One possible technique is simultaneous injection of microwave power and ultrasonic wave. Ultrasonic wave induces pressure fluctuation with the wave propagation and is so far used for cavitation production in the water. We propose utilization of reduced pressure induced by ultrasonic cavitation for improvement of the plasma production. Correlation between the plasma production and the ultrasonic power will be discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권8호
• /
• pp.1305-1318
• /
• 2007

On a global scale agriculture and in particular enteric fermentation in ruminants is reported to produce about one fourth (21 to 25%) of the total anthropogenic emissions of methane ($CH_4$). Methane is produced during the anaerobic fermentation of hydrolyzed dietary carbohydrates in the rumen and represents an energy loss to the host besides contributing to emissions of greenhouse gases into the environment. However, there appears to be uncertainty in the $CH_4$ estimation from livestock due to the limited availability of data to document the variability at the farm level and also due to the significant impact of diet on the enteric $CH_4$ production. The methane mitigation strategies require robust prediction of emissions from rumen. There are many methods available which would be suitable for measuring $CH_4$ produced from the various stages of animal production. However, several factors need to be considered in order to select the most appropriate technique like the cost, level of accuracy required and the scale and design of the experiments to be undertaken. Selection of any technique depends on the accuracy as each one has its advantages and disadvantages. Screening of mitigation strategies may be evaluated using individual animal before large-scale trials on groups of animals are carried out. In this review various methods for the estimation of methane production from ruminants as well as for the determination of methane production potential of ruminant feeds are discussed. The advantages and disadvantages of the methods starting from respiration chamber, ventilated hood, facemask, sulphur hexafluoride ($SF_6$) tracer technique, prediction equations and meteorological methods to in vitro methods are detailed.

• 한국수정란이식학회지
• /
• 제6권2호
• /
• pp.18-29
• /
• 1991

Nuclear transplantation technique is known as the most potential and efficient method for producing a large number of genetically identical animals from a single embryo. The technical development of nuclear transplantation in mammals and its application to the production of cloned animals are described. For the efficient and successful production of cloned embryos by nuclear transplantation, the right selection and micromanipulation of recipient eggs or embryos as capacious recipient cytoplasm, the adequate and benefitlal preparation of multiple totipotent embryonic cells as donor nuclei, and also the fusion technique are very critical. Recent studies approaching to these critical points are introduced and discussed. Up to date, the overall efficiency of production of cloned embryos and offspring in livestock is estimated to be low. Further technical development of nuclear transplantation will enable large-scale production of cloned livestock and in near future the commercial cloning of animals will become a reality.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권12호
• /
• pp.638-646
• /
• 2002

This paper presents an efficient algorithm for evaluating the Profit and revenue of generating units in a competitive electricity market based on the probabilistic production costing technique. The accurate evaluation of the profit and revenue of generating units for long-term perspectives is one of the most important issues in a competitive electricity market environment. For efficient calculation of the profit and revenue of generating units under the equivalent load duration curve(ELDC), a new approach to figure out the marginal plants and the corresponding market clearing prices during a time period in a probabilistic manner is developed. The mathematical formulation and illustrative application of the suggested method is presented.

• 한국산업융합학회 논문집
• /
• 제12권4호
• /
• pp.203-208
• /
• 2009

Lacks of harmony of a person and machine according to productivity elevation pursuit is happened by enterprise common problem in Global competition age and productivity loss is caused being connected to worker's burden work. Burden work in PET bottle production Process which are arrangement, Packing, interior inspection is analyzed by Ergonomic analysis technique. REBA estimation point(10~11 points) means the high step of hazard on worker's burden. It is immediately required the improvement on the process. This thesis show you the improving methods like package, examination justice.

• 디지털융복합연구
• /
• 제13권3호
• /
• pp.185-191
• /
• 2015

본 논문에서는 프로파일링 기술을 교육 분야에 융합하여 스마트 교안 제작을 위한 시스템을 구축하기 위해 필요한 제반 요소에 대해 살펴보고, 이에 부합되는 기술인 프로파일링 기술, 기술 동향, 제품 동향에 대하 살펴보았다. 이를 기반으로 구현에 필요한 요소인 스마트 교안 제작 및 편집기술, 스마트 교안 관리기술, 교안 편집 및 연동기술에 대해 제안을 하였다. 제안된 기술을 기반으로 시스템이 구축되면 수업 교안 저작, 콘텐츠 파일 관리, 수업 강의 기능이 복합적으로 구성되며, 수업 진행을 원활히 수행하고 개개인의 학습 능력에 따라 이해도가 향상될 수 있다.

• 한국콘텐츠학회논문지
• /
• 제10권5호
• /
• pp.115-123
• /
• 2010

정보통신기술의 발달로 기존의 방식과는 달리 다양한 플랫폼에서 풀 브라우징 서비스를 통해 영상 콘텐츠의 제공이 가능하게 되었다. 이러한 패러다임의 변화는 소비자의 수용태도에 변화를 줄 뿐만 아니라, 영상 콘텐츠 제작 방식에도 변화를 요구한다. 하지만 영상 콘텐츠의 많은 부분이 모바일 플랫폼에 맞추어 적당히 변형되거나 사이즈 변환과 같은 기본적인 변환으로 수용자들에게 서비스되고 있다. 이것은 모바일 특성에 맞는 콘텐츠 유형 및 제작이 아닌 사용자에게 전달되는 방식으로의 변화만을 의미하므로, 모바일 콘텐츠 특성에 맞는 영상제작 및 편집과 같은 미학적인 면에서의 제작방식에 변화가 요구되어진다. HD영상의 전환으로 인하여 카메라 앵글, 구도, 조명등과 같이 제작 방식에 변화가 생긴 것과 마찬가지로 풀브라우징 서비스에 맞는 영상제작 기법으로 변화되어야 한다. 본 연구는 HD 영상제작에 따른 제작 방식 변화를 바탕으로 스마트 폰 시장 확장에 따른 모바일 기기에 적합한 동영상 편집기법에 대한 방향을 제안하고자 한다. 이를 위해, 현재 이러닝 제작에 사용되고 있는 화면 전환기법과 편집기법을 영상제작에 응용하거나, 종횡비의 변화, 다중화면 기법 등과 같은 다양한 편집기법을 이용하여 스마트 폰 플랫폼에 적합한 영상 변환 및 편집 방법을 제시하고자 한다. 이러한 새로운 시도들은 기존의 웹이 가지고 있었던 개방성, 적시성과 같은 특성들을 모바일에 적용하여 줌으로써 새로운 패러다임을 이끌고 가며 플랫폼으로써 자리를 잡아갈 것이다. 또한 개인 문화 영역으로 확대되어 단순 의사전달도구에서 벗어나 표현도구와 놀이도구로써 자리 잡을 것이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권7호
• /
• pp.1049-1056
• /
• 2007

This study was conducted to compare the methane ($CH_4$) production estimated by in vivo (sulfur hexafluoride tracer technique ($SF_6$)) with that of two in vitro rumen simulation (RUSITEC) and gas production (IVGPT)) techniques. Four adult dry Holstein cows, aged $7.4{\pm}3.0$ years and weighing $697{\pm}70$ kg, were used for measuring methane production from five diets by the $SF_6$ technique. The experimental diets were alfalfa hay ($D_1$), corn silage + soybean meal (SBM) (910: 90, $D_2$), Italian rye grass hay +SBM (920: 80, $D_3$), rice straw +SBM (910: 90, $D_4$) and Sudan grass hay +SBM (920: 80, $D_5$). Each diet was individually fed to all 4 cows and 5 feeding studies of 17 d each were conducted to measure the methane production. In the RUSITEC, methane production was measured from triplicate vessels for each diet .In vitro gas production was measured for each of the diets in triplicate syringes. The gas produced after 24 and 48 h was recorded and gas samples were collected in vacuum vials and the methane production was calculated after correction for standard temperature and pressure (STP). Compared to the $SF_6$ technique, estimates of methane production using the RUSITEC were lower for all diets. Methane production estimated from 24 h in vitro gas production was higher (p<0.001) on $D_1$ as compared to that measured by $SF_6$, whereas on $D_2$ to $D_5$ it was lower. Compared to $SF_6$, methane production estimated from 48 h in vitro gas production was higher on all diets. However, methane estimated from the mean of the two measurement intervals (24+48 h/2) in IVGPT was very close to that of $SF_6$ (correlation 0.98), except on $D_1$. The results of our study confirmed that IVGPT is reflective of in vivo conditions, so that it could be used to generate a database on methane production potential of various ruminant diets and to examine strategies to modify methane emissions by ruminants.

• 기술사
• /
• 제33권2호
• /
• pp.62-67
• /
• 2000

The trouble rank of business management of the small-medium manufacturing enterprises in Korea is constituted by that average 28.6% of production management in the worst trouble of business management from 1982 to 1999. The status of production management approaching problem is analyzed for Korean small-medium manufacturing enterprises and it us checked productivity improvement and requirement facts impede productivity improvement. It is expected to contribute much productivity improvement through a new established model of production management system and technique or tool for small-medium manufacturing enterprises in Korea.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1995년도 특별강연 및 춘계학술발표 개요집
• /
• pp.118-122
• /
• 1995

The hydraulic or pneumatic valve spools become essential as the important components on the production of automatic hydraulic or pneumatic machinaries as mechanical industry is developed rapidly. The machining precision is asked for manufacturing the valve spools. They could be unstable in the quality by the conventional arc welding and they have a lot of technical problems in manufacturing because their shapes are generally small. By the Precision casting process such as lost wax process, the production cost will be increased. But by the friction welding technique, they will be able to be made without such problems. Furthermore, there is a few study on friction welding of such hydraulic valve spool steels and in-process real-time weld quality evaluation technique by acoustic emission. So that, the final purpose of this study is 1) the development of design and manufacturing technique of hydraulic or pneumatic valve spool by optimizing of friction welding, and 2) the development of in-process real-time weld quality evaluation technique by acoustic emission.