• East Asian Journal of Business Economics (EAJBE)
• /
• v.3 no.3
• /
• pp.14-26
• /
• 2015

A wind speed forecast is a crucial and sophisticated task in a wind farm for planning turbines and corresponds to an estimate of the expected production of one or more wind turbines in the near future. By production is often meant available power for wind farm considered (with units KW or MW depending on both the wind speed and direction. Such forecasts can also be expressed in terms of energy, by integrating power production over each time interval. In this study, we technically focused on mathematical modeling of wind speed and direction forecast based on locally data set gathered from Aghdasiyeh station in Tehran. The methodology is set on using most common techniques derived from literature review. Hence we applied the most sophisticated forecasting methods to embed seasonality, trend, and irregular pattern for wind speed as an angular variables. Through this research, we carried out the most common techniques such as the Box and Jenkins family, VARMA, the component method, the Weibull function and the Fourier series. Finally, the best fit for each forecasting method validated statistically based on white noise properties and the final comparisons using residual standard errors and mean absolute deviation from real data.

• The Korean Journal of Food & Health Convergence
• /
• v.4 no.3
• /
• pp.6-11
• /
• 2018

In the Republic of Belarus as well as in the world acute problem of protecting forests from diseases and pests. The damage caused by root rot is essential, therefore, the problem of forest protection is an urgent task. The biologics has the greatest prospects in according with traditional methods of struggle. Deep method of cultivation of a mushroom Phlebiopsis gigantea with use of nutrient mediums on the basis of ethanol stillage and its components (fugat) is researched. Feasibility of use stillage as raw materials in production of a biological product for the wood protection against root decay is shown. The effect of different additives (sawdust, fodder yeast) on the accumulation of reactive biological product - oidy has been studed It was determined that the deep cultivation using sawdust of the highest accumulation oidy (1.5 $10^6units/ml$). It was also found that the stillage is the best breeding ground for fungus biomass accumulation (7.9 9.8 g / l) versus fugat (6.0 6.6 g / l). On the basis of research work the technological scheme for production of a biological product were developed. Based on the conducted studies, a technological scheme was proposed for obtaining a biological preparation by deep cultivation of the fungus Phlebiopsis gigantea.

• Korean Journal of Remote Sensing
• /
• v.15 no.4
• /
• pp.329-337
• /
• 1999

With the ready access to the high resolution satellite image data, users of and areas covered by satellite image data are constantly on the rise world-widely. Korea will also be able to take full advantage of the satellite data once the Korea Multi-Purpose Satellite 1 (KOMPSAT-l) is successfully launched. Harmonizing satellite data production and application technology and users' needs, along with the guiding policy is essential for promoting satellite data use. Up to now, the Korean government has mainly concentrated on developing production technology for the satellite instruments. However, the imminent task of independent satellite data production demands a promotion policy for satellite data use. In this context, the policy is defined as an important medium for identifying the role and status of satellite image information at the national level and also preparing the legal as well as systematic foundation for producing, building, distributing, and packaging satellite data. The present paper aims to examine the role and status of the satellite data as well as their current status and problems in Korea in reference to the National Spatial Data Infrastructure, and finally to provide the policy directions to promote the satellite data use in public sector on the basis of the preceding analyses.

• The Korean Journal of Food & Health Convergence
• /
• v.6 no.6
• /
• pp.17-23
• /
• 2020

The main task of agro-industrial production is to provide the population with food products for the production of which energy is expended in the form of electricity, technical means, fuels and lubricants, mineral fertilizers, etc. Accordingly, we have developed a concept and general methodological principles for the analysis of ecological and biotechnical systems in animal husbandry, it makes it possible to simulate the influence of various factors on the energy and ecological efficiency of systems, to compare and search for energy-saving modes and technologies. General methodological principles have been developed for the analysis of energy efficiency and environmental safety of agricultural ecological and biotechnical systems, which are based on the definition of the bioenergy efficiency coefficient, the quantitative expression of which is the ratio of energy accumulated in products to the total energy consumption for its production. This makes it possible to model with sufficient accuracy the influence of various factors on the energy and environmental efficiency of the system, to compare and search for energy-saving modes and technologies in order to find and select the most energy efficient ones to increase the energy efficiency of the complex.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.259-261
• /
• 2021

In this paper, VR smart factory XR content tailored to process execution scenarios was produced to reflect the characteristics of XR content, which is highly dependent on HDM, unlike general-purpose content software for UX/UI design and usability evaluation of digital twin-based XR content in manufacturing. HMD equipment called Qculus Quest2 was used to perform the process execution task scenario for XR content, and content production was made through Unity Engine and SteamVR Plugin.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4204-4212
• /
• 2023

Background: Storage reservoirs of radioactive waste could be the source of atmospheric pollution due to the efflux of aqueous aerosol from their water areas. The main mechanism of formation of aqueous aerosols is the collapse of gas bubbles at the water surface. In this paper, we discuss the potential influence of biological factors on gas ebullition in the water areas of the radioactively contaminated industrial reservoirs R-9 (Lake Karachay) and R-4 (Metlinsky pond) of the Mayak PA. The emission of the released non-dissolved gases captured with gas traps in reservoir R-9 was (88-290) ml/m² per day (2015) and in reservoir R-4 (270-460) ml/m² per day (2016). The analysis of gas composition in reservoir R-4 (60% methane, 35% nitrogen, 2.4% oxygen, 1.5% carbon dioxide) confirms their biological origin. It is associated with the processes of organic matter destruction in bottom sediments. The major source of organic matter in bottom sediments is the dying phytoplankton developing in these reservoirs. Conclusion: The obtained results form the basis to set a task to quantify the relationship between the phytoplankton development, gases ebullition and radioactive atmosphere contamination.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.6
• /
• pp.767-777
• /
• 2014

Characterizing local chicken types and their mostly rural production systems is prerequisite for designing and implementing development and conservation programs. This study evaluated the management practices of small-scale chicken keepers and the phenotypic and production traits of their chickens in Oman, where conservation programs for local livestock breeds have currently started. Free-range scavenging was the dominant production system, and logistic regression analysis showed that socio-economic factors such as training in poultry keeping, household income, income from farming and gender of chicken owners influenced feeding, housing, and health care practices (p<0.05). A large variation in plumage and shank colors, comb types and other phenotypic traits within and between Omani chicken populations were observed. Male and female body weight differed (p<0.05), being $1.3{\pm}0.65$ kg and $1.1{\pm}0.86$ kg respectively. Flock size averaged $22{\pm}7.7$ birds per household with 4.8 hens per cock. Clutch size was $12.3{\pm}2.85$ and annual production $64.5{\pm}2.85$ eggs per hen. Egg hatchability averaged $88{\pm}6.0%$ and annual chicken mortality across all age and sex categories was $16{\pm}1.4%$. The strong involvement of women in chicken keeping makes them key stakeholders in future development and conservation programs, but the latter should be preceded by a comprehensive study of the genetic diversity of the Omani chicken populations.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.564-573
• /
• 2018

External environment of enterprises are rapidly changing brought about mainly by global competition, cost and profitability pressures, and emerging new technology. In particular, frequent change of customer requirements is a tough challenge to manufacturing company. To cope with these challenges, a production planning and scheduling (PP&S) function might be established to provide accountability for both customer service and operational efficiency. PP&S deals with short-term decision making in the production process of whole supply chain. The task of PP&S is to seek a balance between customer orders and limited resources. At present, many PP&S software solutions have been utilized in many enterprises to generate a realistic production plan and schedule efficiently. The aim of this paper is to analyze the PP&S functionalities and its system architecture from the perspective of SCM (Supply Chain Management), and propose the PP&S solution classification framework to facilitate the comparison among various solutions.

• Human Ecology Research
• /
• v.55 no.5
• /
• pp.555-566
• /
• 2017

This study analyzes the practical tasks and required competency for technical designers to provide basic data on the training of domestic technical designers. The survey was applied to 21 technical designers of big vendors as well as investigated tasks, task flow, important tasks, time-consuming tasks, and required competencies. The results of the study are as follows. First, the technical designers were in charge of several brands of buyers and distributors of fashion companies, or several lines of the same brand. The main production items were cut and sewn knits. Second, the flow of task and tasks were in the order of buyer comments analysis, sloper decision to matching style, sewing specification, productive sewing method research, size specification suggestion, pattern correction comments, construction decision to matching style & fabric, sample evaluations, fit approval, business e-mail writing, specification & grading confirmation, and communication with buyer. Third, five tasks (analysis of buyer comments analysis, communication with buyer, pattern correction comments, productive sewing methods research, sample evaluation) were important and time-consuming tasks. Fourth, reeducation was required in order of sewing, pattern, English, fabric, and fitting. Fifth, competencies to be a technical designers were fitting, pattern correction, size specification & grading, construction & sewing specification, sewing terms & techniques, and communication skills. In conclusion, technical designer training should focus on technology-based instruction, such as sample evaluation, fitting, pattern correction, and productive sewing methods research of cut and sewn knits.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2019

The purpose of this study is to analyze the employment trends of autonomous automobile industry which is related to the 4th Industrial Revolution. Previously, big data of the employment trends were divided into skill field and task field. As a result, if a company was employed in the field of skill field, it was required to have talent in which personality traits and innovation traits were prominent. Second, if the task field is a production worker, it is desirable to have talented person with outstanding personality traits. In addition, if the task field is management, it has been confirmed that communication qualities require outstanding talent. The results of this study suggest that it is possible to use the data as a basic data for finding an effective employment strategy by identifying the characteristics of the talented person and considering the suitability of the tendency of hiring.