• 한국습지학회지
• /
• 제16권3호
• /
• pp.403-409
• /
• 2014

수질오염총량관리 대상물질로 총 유기탄소(Total Organic Carbon, TOC)항목의 적용을 검토 하고 있는 가운데 이 항목에 대한 가축분뇨의 발생 및 배출 원단위 확보가 시급한 실정이다. 따라서 본 연구에서는 가축 분뇨 중 수질오염 기여도가 가장 높은 것으로 알려진 양돈 분뇨에 대해 TOC를 포함한 원단위를 산정하였다. 4대강 수계의 56개 농장을 대상으로 수계별, 사육방식별, 축사의 형태 및 규모별 양돈 분뇨의 농도, 분뇨 발생량(세척수 포함) 및 부하를 산정하였다. 분뇨 발생량은 한강수계와 낙동강수계에서 모돈 사육이 밀집된 소규모 농장 내 스크래퍼 형태의 축사에서 많은 것으로 나타났고, 양돈분뇨 발생량은 전체 수계 평균 7.4 L/두/d로 나타났다. 평균 발생 농도는 TOC가 16,037 mg/L, BOD가 10,559 mg/L, TN이 4,145 mg/L, TP가 503 mg/L로 조사되었으며, 이때 발생 부하는 TOC가 117.1 g/두/일, BOD가 77.1 g/두/일, TN이 34.7 g/두/일 그리고 TP가 3.67 g/두/일로 도출되었다.

• 가정과삶의질연구
• /
• 제16권1호
• /
• pp.125-139
• /
• 1998

This study investigates work loads and coping strategies of the married female production workers(MFPW). The data of 370 MFPW in manufacturing sector in Taegu are collected by using a questionare in August 1995 The findings of this study are as follow: 1) The results of objective work loads assessed time dairy show that the average working hours is 14.25 hours during weekdays. The respondents spend 11.5 hours and 2.75 hours on doing paid and household work respectively,. The shortage of phisiological and leisure time due to spending excessively long time on work. 2) MFPW perceive the severe subjective work loads in the areas of personal family and social life. The perceived burden from paid work itself is relatively low due to the nature of their job. 3) The coping strategies MFPW actually adopted are limited mostly to those from an individual domain such as shortening the time for sleep leisure or household labor.

• 한국물환경학회지
• /
• 제22권2호
• /
• pp.277-287
• /
• 2006

Production loads of the contaminants near the Nakdong-river are, BOD : $1,006ton{\cdot}day^{-1}$, TN : $117ton{\cdot}day^{-1}$, and TP : $21ton{\cdot}day^{-1}$. Among the sources of contamination, the biggest contribution to the production load was shared by the human population, which maintains 40.7% of BOD, 44.2% of TN, and 52.5% of TP production. Similarly, among the sources of discharge load, the human population contributed 45.0% of BOD, 34.5% of TN, and 45.8% of TP. Results of flow investigation in 2001 and 2002 indicate that among the side streams, Nam-river showed the greatest average flow. In case of main stream flow, it was increased in the downstream due to the increase of the influents from the side streams. In case of BOD, COD, TOC and SS, high values were detected at Keumho-river where industrial wastewater was discharged as high level concentration. In case of the main stream, Koryoung point where direct influence of Keumho-river and Seongseo industrial complex is evident showed high BOD, COD and TOC. Oxidized nitrogen compounds and total nitrogen showed similar patterns of BOD, COD, and TOC. Especially, nitrate nitrogen was relatively high at all points. However, in case of Chlorophyll-a, relatively high values were observed at mid- and downstream areas such as Koryoung, Namjee, Soosan, Moolkeum and Hakooeun. This could be caused by the slow flow rate and the abundant nutrient salts attributed by the side streams. Relatively better water quality was observed in 2002 when the flow was relatively abundant than that in 2001. Results of investigation during 2001-2002 showed that delivery load increased as the flow reaches downstream. In 2001, delivery loads at the downstream Soosan-bridge were BOD $22,152ton{\cdot}day^{-1}$, COD $45,467ton{\cdot}day^{-1}$, TN $22,062ton{\cdot}day^{-1}$, TP $926ton{\cdot}day^{-1}$. Delivery loads in 2002 were increased due to the increase of the rainfall. They are BOD $25,876ton{\cdot}day^{-1}$, COD $64,200ton{\cdot}day^{-1}$, TN $41,101ton{\cdot}day^{-1}$, and TP $1,362ton{\cdot}day^{-1}$.

• 한국환경과학회지
• /
• 제16권2호
• /
• pp.203-210
• /
• 2007

The delivery load data obtained from Nakdong river basin are used for developing the model estimating the daily delivery load on the main side streams of Nakdong River. The developed model assesses the daily contamination loads of the main thirteen side streams that contribute to the main stream of Nakdong river. It is developed that the model using the simplified equation that can estimate the daily delivery loads on the side main streams of Nakdong river for a period of having no data of the water quality and flow. The developed model for estimating the daily delivery loads from the main side streams in Nakdong river basin on each item such as BOD, TN, and TP is expressed as Daily delivery load ($\frac{kg}{day}$) = Production load $(\frac{kg}{day}){\times}(1-{\alpha}){\times}(\frac{daily\;runoff}{average\;runoff\;per\;year}){\gamma}$. The estimated values obtained by using the model are almost fit to the calculated values (real data) that have been acquired from the thirteen main side streams in Nakdong river basin. The correlation coefficient values, R, that indicate the correlation between the estimated and the calculated show over 0.7 that mean the estimated values from the used model are adapted to the real data except TN values of Nam-river, Hwang-river, Gam-river, We-river. Especially, the correlation of TP values between the estimated and the calculated implies quite a creditable data to use.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1627-1636
• /
• 2014

In real-time electricity price environment, the energy management system can provide the significant advantage to the residential, commercial and industrial customers since it can reduce the electricity charge by controlling the load operation effectively in response to time-varying price. However, the earlier studies for load management mainly focus on the residential and commercial customers except for the industrial customers because most of load operations in industrial sector are intimately related with production schedule. So, it is possible that the inappropriate control of loads in industrial sector causes huge economic loss. In this paper, therefore, we propose load control algorithm for factory energy management system(F-EMS) to achieve not only minimizing the electricity charges but also maintaining production efficiency by considering characteristics of load operation and production schedule. Considering characteristics of load operation and production schedule, the proposed load control algorithm can reflect the various characteristics of specific industrial customer and control their loads within the range that the production efficiency is maintained. Simulation results show that the proposed load control algorithm for F-EMS leads to significant reduction in the electricity charges and peak power in industrial sector.

• 수산해양기술연구
• /
• 제42권1호
• /
• pp.44-53
• /
• 2006

The expansion of near shore aquaculture is feasibility of moving aquaculture facilities into the open ocean. Numerical modeling technique using finite element method was used to enable the optimum design and evaluation of submersible aquaculture cage system. The characteristics of mooring loads response in mooring lines under waves and current and their response amplitude operators were calculated for single and three point mooring configuration at the surface condition and submerged one. The static mooring loads without wave and current loading were similar for both the surface and submerged configuration. It was calculated that three point mooring was more adequate than single point mooring for the mooring configuration of submersible aquaculture cage system. The wave induced response amplitude operators for the single point mooring configuration with the influence of currents were identical to those without the influence of currents.

• 한국해양환경ㆍ에너지학회지
• /
• 제1권2호
• /
• pp.96-108
• /
• 1998

대표적인 부영양화 해역인 일본의 뢰호내해를 대상으로 하여 해수ㆍ저질문의 욕존 산소와 영양염의 수수과정을 표현할 수ㆍ저질예측모델을 개발하여, 해역의 유입부하량과 수질의 응답특성, 부하량삭감의 영향해석 및 유입부하량과 수산자원의 관계 해석을 통하여 부영양화 해역의 수질관리방안에 대하여 연구하였다. 부하에 대응한 수질의 장기예측결과, 부하량과 수질의 응답특성이 해역에 따라 다르게 나타난다. 적상부하량의 간역추산방법으로서 인접해역의 부하영향 및 기여율을 포함한 부하삭감후의 수질예측에 대한 개산식을 제안하였다. 부하량 삭감효과의 수직계산결과 인(P) 뿐만 아니라 질소(N)의 부하삭감의 영향이 크게 기여함을 보였다. 유입부하량과 수산자원의 관계를 수질을 매개로 검토한 바, 뢰호내해와 같은 부영양화 해역에서는 유입부하량의 증가는 1차생산량의 증가에 반영되지만 2차생산 이후의 전송효율에도 한도가 있는 것으로 나타났다.

• Steel and Composite Structures
• /
• 제44권6호
• /
• pp.829-843
• /
• 2022

This manuscript work presents a comprehensive continuum model capable to investigate the effect of porosity on vibro-acoustic behaviour of functionally graded (FG) beams resting on an elastic foundation subjected to thermal and mechanical loadings. Effects of uniform temperature rise and edge compressive load on the sound radiation characteristics are studied in a comparative manner. The numerical analysis is carried out by combining finite element method with Rayleigh's integral. Detailed parametric studies are accomplished, and influences of power law index, porosity volume, porosity distribution and boundary conditions on the vibro-acoustic response characteristics are analyzed. It is found that the vibro-acoustic response under mechanical edge compression is entirely different compared to from that under the thermal load. Furthermore, nature of grading of porosity affects the sound radiation behaviour for both the loads. The proposed model can be used to obtain the suppression performance of vibration and noise FG porous beams under thermal and mechanical loads.

• Wind and Structures
• /
• 제22권3호
• /
• pp.369-391
• /
• 2016

Electricity is transmitted by transmission lines from the source of production to the distribution system and then to the end users. Failure of a transmission line can lead to devastating economic losses and to negative social consequences resulting from the interruption of electricity. A comprehensive in-house numerical model that combines the data of computational fluid dynamic simulations of tornado wind fields with three dimensional nonlinear structural analysis modelling of the transmission lines (conductors and ground-wire) is used in the current study. Many codes of practice recommend neglecting the tornado forces acting on the conductors and ground-wires because of the complexity in predicting the conductors' response to such loads. As such, real transmission line systems are numerically simulated and then analyzed with and without the inclusion of the lines to assess the effect of tornado loads acting on conductors on the overall response of transmission towers. In addition, the behaviour of the conductors under the most critical tornado configuration is described. The sensitivity of the lines' behaviour to the magnitude of tornado loading, the level of initial sag, the insulator's length, and lines self-weight is investigated. Based on the current study results, a recommendation is made to consider conductors and ground-wires in the analysis and design of transmission towers under the effect of tornado wind loads.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1094-1099
• /
• 2009

Workforce information is important in production planning because production planning requires matching a production unit's capacity to loads of assignments. However, tracking and managing workforce information such as skills and accident history is not an easy job. This paper describes a prototype database system for a workforce database system that employs RFID technology. This system tracks daily workforce production capacity on sites. A pilot project is described to explore the benefits and possibility of using radio-frequency identification (RFID) to track and manage workforce information, and is followed by the results of a survey to identify benefits. In addition to the survey identifying the benefits of the database system, the paper also presents a list of challenges through a series of interviews.