• 설비공학논문집
• /
• 제24권9호
• /
• pp.671-678
• /
• 2012

The objective of this study is to analyze theoretically the performance of an open air-cycle refrigeration system in which environmental concerns increase. The pressure ratio of the external compressor and efficiencies of the components that compose of the system are selected as important parameters. As the pressure ratio of the external compressor increases, the pressure ratio of the ACM compressor is determined high, the refrigerating temperature and capacity increase, the COP decreases, and the total entropy production rate increases. The effect of heat exchanger effectiveness and turbine efficiency on the performance are greater than that of the ACM compressor efficiency. Also the performance of the air-cycle refrigeration system with two heat exchangers has been enhanced like high COP and low total entropy production rate, compared to the system with one heat exchanger.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.2066-2073
• /
• 2021

The use of nuclear reactors is a large studied possible solution for thermochemical water splitting cycles. Nevertheless, there are several problems that have to be solved. One of them is to increase the efficiency of the cycles. Hence, in this paper, a thermal energy optimization of a Sulfur-Iodine nuclear hydrogen production cycle was performed by means a heuristic method with the aim of minimizing the energy targets of the heat exchanger network at different minimum temperature differences. With this method, four different heat exchanger networks are proposed. A reduction of the energy requirements for cooling ranges between 58.9-59.8% and 52.6-53.3% heating, compared to the reference design with no heat exchanger network. With this reduction, the thermal efficiency of the cycle increased in about 10% in average compared to the reference efficiency. This improves the use of thermal energy of the cycle.

• International journal of advanced smart convergence
• /
• 제7권1호
• /
• pp.42-47
• /
• 2018

Recently, as the demand for limited resources continues to rise and problems of resource depletion rise worldwide, the importance of renewable energy is gradually increasing. In order to solve these problems, various methods such as energy conservation and alternative energy development have been suggested, and biogas, which can utilize the gas produced from biomass as fuel, is also receiving attention as the next generation of innovative renewable energy. New and renewable energy using biogas is an energy production method that is expected to be possible in large scale because it can supply energy with high efficiency in compliance with energy supply method of recycling conventional resources. In order to more efficiently produce and manage these biogas, a biogas plant has emerged. In recent years, a large number of biogas plants have been installed and operated in various locations. Organic wastes corresponding to biogas production resources in a biogas plant exist in a wide variety of types, and each of the incoming raw materials is processed in different processes. Because such a process is required, the case where the biogas plant process is inefficiently operated is continuously occurring, and the economic cost consumed for the operation of the biogas production relative to the generated biogas production is further increased. In order to solve such problems, various attempts such as process analysis and feedback based on the feedstock have been continued but it is a passive method and very limited to operate a medium/large scale biogas plant. In this paper, we propose "CNN-based production yield prediction algorithm for increasing process efficiency of biogas plant" for efficient operation of biogas plant process. Based on CNN-based production yield forecasting, which is one of the deep-leaning technologies, it enables mechanical analysis of the process operation process and provides a solution for optimal process operation due to process-related accumulated data analyzed by the automated process.

• Journal of Biosystems Engineering
• /
• 제38권1호
• /
• pp.33-40
• /
• 2013

Purpose: The goal of this study was to build an accurate digital factory that evaluates the performance of a factory using computer simulation. To achieve this goal, we evaluated the effect of worker-related variables on production in a simulation model using comparative analysis of two cases. Methods: The overall work process and worker-related variables were determined and used to build a simulation model. Siemens PLM Software's Plant Simulation was used to build a simulation model. Also, two simulation models were built, where the only difference was the use of the worker-related variable, and the total daily production analyzed and compared in terms of the individual process. Additionally, worker efficiency was evaluated based on worker analysis. Results: When the daily production of the two models were compared, a 0.16% error rate was observed for the model where the worker-related variables were applied and error rate was approximately 5.35% for the model where the worker-related variables were not applied. In addition, the production in the individual processes showed lower error rate in the model that included the worker-related variables than the model where the worker-related variables were not used. Also, among the total of 22 workers, only three workers satisfied the IFRS (International Financial Reporting Standards) suggested worker capacity rate (90%). Conclusions: In the daily total production and individual process production, the model that included the worker-related variables produced results that were closer to the real production values. This result indicates the importance of worker elements as input variables, in regards to building accurate simulation models. Also, as suggested in this study, the model that included the worker-related variables can be utilized to analyze in more detail actual production. The results from this study are expected to be utilized to improve the work process and worker efficiency.

• KDI Journal of Economic Policy
• /
• 제12권4호
• /
• pp.21-46
• /
• 1990

본 논문은 유승민(劉承旻) 이인찬(李仁燦)(1990)이 추정한 우리나라 제조업(製造業)의 기술적(技術的) 효율성(效率性)을 토대로 기술적(技術的) 효율성(效率性)의 산업적(産業的) 격차(隔差)를 설명하는 경험적 증거를 구하고 효율성 추정치의 동태적(動態的) 안정성(安定性)을 분석하였다. 분석결과 산업(産業)의 생산규모(生産規模)가 클수록, 생산특화도(生産特化度)가 높을수록, 자본(資本)-노동비율(勞動比率)의 이질성(異質性)이 낮을수록 높은 기술적(技術的) 효율성(效率性)을 나타내었다. 이러한 결과는 미국(美國) 일본(日本)의 경우에 대한 연구결과와 공통되는 것으로서 기술적(技術的) 효율성(效率性)과 산업조직특성간(産業組織特性間)의 관계가 경제규모나 발전단계의 차이에도 불구하고 가설(假說)의 일반성(一般性)을 지지한다는 점에서 중요한 의미를 지닌다. 기업집중률(企業集中率) 또한 기술적 효율성에 대하여 선형(線型)보다는 이차형(二次型)의 관계를 가지고 있으나 우리나라의 경우 기술적 효율성이 극대화되는 집중률(集中率)은 매우 높은 것으로 나타났다. 또한 본 논문은 효율성(效率性) 척도간(尺度間)의 선택문제에 대한 경험적 기준을 제시하였는데 부가가치액기준(附加價値額基準)보다는 생산액기준(生産額基準)으로 추정된 기술적(技術的) 효율성(效率性)이 제가설(諸假說)들과 잘 부합되는 결과를 나타내었다. 효율성의 동태적(動態的) 안정성(安定性)에 관한 시론적(試論的) 분석(分析)에 의하면 시간변화에 따른 효율성 추청치의 안정성은 효율성 척도간에 다소의 차이는 있으나 기대한 만큼 높지 않았다. 따라서 기술적 효율성의 동태적(動態的) 불안전요인(不安全要因)에 관한 설명은 연구과제로 남는다.

• 한국유기농업학회지
• /
• 제24권3호
• /
• pp.385-412
• /
• 2016

This paper analyzes economic efficiency of strawberries and tomatoes farms using the data envelopment analysis (DEA). We examine how production characteristics and farm size affect overall efficiency (OE), allocative efficiency (AE), and technological efficiency (TE). We also survey sample farm households from the Farm Income Investigation database of Rural Development Administration to investigate management and cultivation techniques and to analyze economic efficiency by technique. Implications for improving efficiency are suggested in the conclusion.

• 한국임상수의학회지
• /
• 제16권1호
• /
• pp.163-176
• /
• 1999

The nuclear transplantation technique is known as the most potential and efficient method for producing large numbers of genetically identical animals from a single embryo and somatic cells. After Dolly was introduced in 1997, many scientists were amazed. A possibility came to a reality that live offspring could be produced with differentiated somatic cells from an adult animal. On the other side, many in the press and the sensationalists focused on the socially, ethically and scientifically unacceptable sides of the technology. In this article, the history, current status and prospects of the technological development of nuclear transplantation in mammals and its application to the production of cloned animals are described. For the efficient and successful production of cloned embryos by nuclear transplantation, the right selection, preactivation and micromanipulation of oocytes as capacious recipient cytoplasm, the adequate and benefitial preparation of multiple totipotent embryonic and somatic cells as donor nuclei, fusion of them and in vitro production of cloned embryos are very critical. Recently the overall efficiency of production of cloned embryos and offspring in livestock has been much improved. Cloning will also be a more efficient, faster and useful way of creating transgenic fetuses for gene therapies, gene pharming, organs for xenotransplantation by preselection and mass production of transgenic embryos and consequently improving the production efficiency in transgenic animals. Further technical development of nuclear transplantation will enable large-scale production of cloned livestock and in near future the commercial cloning of animals will become a reality.

• 상하수도학회지
• /
• 제24권6호
• /
• pp.703-712
• /
• 2010

This study performed to extract operation factors of major organic wastes, which were food wastes and waste activated sludge generated in industries in order to use them as a substrate for bio-H2 production. According to the results of experimental analysis for hydrogen production capacity by various organic concentrations, the hydrogen production yield was the highest at 80 g/L, and the efficiency was improved by the pretreatment of waste activated sludge (acid treatment, alkali treatment). Hydrogen production efficiency was improved by mixing food wastes and waste activated sludge if waste activated sludge was below than 30%, however, it was decreased when it was more than 50%. The impacts of heavy metals on the hydrogen production shows that the inhibition level depends on the concentration of Cr, Zn, and Cu, Fe was able to enhance the hydrogen production.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.720-722
• /
• 2009

This work is mainly focused at developing the hydrogen production unit with the capacity of 20 $Nm^3/h$ of high purity hydrogen. At present steam reforming of natural gas is the preferable method to produce hydrogen at the point of production cost. The developed hydrogen production unit composed of natural gas reformer and pressure swing adsorption system. To improve the thermal efficiency of steam reforming reactor, the internal heat recuperating structure was adopted. The heat contained in reformed gas which comes out of the catalytic beds recovered by reaction feed stream. These features of design reduce the fuel consumption into burner and the heat duty of external heat exchangers, such as feed pre-heater and steam generator. The production rate of natural gas reformer was 41.7 $Nm^3/h$ as a dryreformate basis. The composition of PSA feed gas was $H_2$ 78.26%, $CO_2$ 18.49%, CO 1.43% and $CH_4$ 1.85%. The integrated production unit can produce 21.1 $Nm^3/h$ of high-purity hydrogen (99.997%). The hydrogen production efficiency of the developed unit was more than 58% as an LHV basis.

• 전자통신동향분석
• /
• 제37권4호
• /
• pp.70-80
• /
• 2022

With the rapid growth in media service platforms providing broadcast programs or content services, content production has become more important and competitive. As a strategy to meet the diverse needs of global consumers for a variety of content and to retain them as long-term repeat customers, global over-the-top service providers are increasing not only the number of content productions but also their production efficiency. Moreover, a considerable amount of scene composition in the flow of content production work appears to be combined with rendering technology from a game engine and converted to object-based computer programming, thereby enhancing the creativity, diversity, quality, and efficiency of content production. This study examines the latest technology trends in content production such as virtual studio technology, which has emerged as the center of content production, the use cases in various fields of artificial intelligence, and the metadata standards for content search or scene composition. This study also examines the possibility of using object-based computer programming as one of the future candidate technologies for content production.