• Korean Journal of Food Science and Technology
• /
• v.2 no.2
• /
• pp.8-16
• /
• 1970

Exploitation of leaf protein concentrates for human consumption is very important. Leaf protein concentrates can be easily prepared by mechanically mincing leaves material and press it for getting the juice. Crude protein can be separated from the juice by aging, adjusting the pH, or heating to $75-80^{\circ}C$ etc. This report deals with the extractability of total-N from 69 species of fresh leaves by mechanical process, and then compared the recovery of leaf protein concentrates from leaf extracts by treating with TCA, pH adjustment and heating. Results are summarized as follows. 1. In general, the greater the content of total-N of leaves the greater the percentage extraction. Extraction of the juice from leaves is needed at least two times. The simple equations are constituted between the total-N (T; %) and the first and second extractability ($E_1,\;E_2;\;%$) of the total-N of leaves, as follows: $E_1=0.8168T\;E_2=0.1830T$ 2. The optimum pH value for coagulating protein from extracts is considered to be 3.5 to 4.5. However, the products of leaf protein concentrate by the pH adjustment of extracts are generally dull in color with rich elasticity. 3. Recoveries of the leaf protein concentrate from extracts by treating methods were in the following order of TCA treatment> pH 4 treatment> pH 3 treatment> heat treatment. The yield of leaf protein concentrates decreased bout 10% with pH 4 treatment, 11.4% with pH 3 treatment, and 14.8% with heat treatment compared with the TCA treatment. 4. The heat treatment is the most benifitial method for the production of leaf protein concentrates with regard to properties of texture, color and yield of products and easiness of the treatment method.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.2
• /
• pp.112-120
• /
• 2007

This paper reviews the use of parasites as 'biological tags' for studying stock analysis of salmonid fishes. Numerous definitions of stock concepts exist, but most of them essentially define a group of fish as having similar biological characteristics and being self-reproducing as stocks. It is important to manage fish stocks for human consumption and sustainable production and especially for salmonid fishes. Because these fry are considered as each country's property, it is necessary to identify and discriminate each fish stock in the open sea. Methods of separating fish stocks are very diverse. Artificial tags, parasites, otoliths scales and genetic characters have been used for stock analysis and each method has advantages and disadvantages. Of these parasites can be good biological tags because they are applied by nature at no cost. Parasites can be infected with susceptible host fishes when they enter into certain areas. Then if they move to the outside and are caught researchers can infer that the fish had been in the endemic area for a period of time during their life. Hence the host fish can be considered as naturally 'tagged' by parasites. However, if they do not pass the parasites-endemic. area, they will harbour no parasites. Therefore, researchers can discriminate each fish stocks and trace their migration routes with these biological tags. In this paper, several examples on the use of parasites as biological tags for studying salmonids, as well as other species, are listed. The advantages and limitations of parasites as biological tags are also discussed. Chum salmon (Oncorhynchus keta), the main salmonid species migrating to Korea, is distributed all around the North Pacific. Korean chum salmon are generally thought to move to the Sea of Okhotsk, the western North Pacific and the Bering Sea. However, there is no clear information on the distribution and migration pathways of Korean chum salmon, and no markers exist for separating them from others yet. Recent Korean chum salmon stock analysis including parasites information are mentioned.

• Journal of Nutrition and Health
• /
• v.41 no.7
• /
• pp.602-611
• /
• 2008

We compared antiobese, hypocholesterolemic, antiplatelet and antioxidant effect of 10% green tea powder and 3% green tea extract in rats pair fed 5% cholesterol diets. The final body weight was decreased significantly compared with the control (p < 0.05). Plasma and liver total cholesterol were lower in group of green tea powder or extract, but not statistically different. HDL cholesterol was increased significantly in group of green tea powder compared with the control or green tea extract (p < 0.05). Plasma triglyceride was significantly decreased in group of green tea extract compared with green tea powder, and green tea powder compared with the control respectively (p < 0.05). Liver triglyceride was significantly decreased in group of green tea powder or green tea extract compared with the control (p < 0.01). Platelet aggregations in the maximum and initial slope were not different among groups. Hemolysis was significantly lower in group of green tea powder compared with the control (p < 0.05). Plasma TBARS production was decreased in group of green tea extract compared with the control (p < 0.05). Na passive leak in intact cells was not different, but Na leak in AAPH treated cell was significantly decreased in group of green tea powder than the control (p < 0.05). The leak increase (${\Delta}Na$ Leak) after AAPH treatment was significantly decreased in groups of green tea powder and extract compared with the control (p < 0.05). Isotope excretion after $^{14}C$-cholesterol ingestion was significantly increased in group of green tea extract compared with the control or the green tea powder (p < 0.05). Consumption of green tea in powder or extract may give beneficial effects in weight control and plasma lipid profiles, impeding metabolic syndrome. More studies are needed to clarify what component of green tea and what mechanism are involved in antiobese and hypolipedemic actions of green tea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.1
• /
• pp.2-15
• /
• 1982

In this report, a total domestic demand for major commercial fertilizer for crop production in Korea up to 1996 was estimated. The agricultural products and area for demand for both 1982 and 1986 was quoted from the estimate of the 5th Five-year Economic plan. And the demands estimated for 1991 and 1996 reflected possible changes of diet from cereal to meat and their indirect effects on the increase of cereal consumption. As the advanced countries followed, consequently, the demands for soybean, corn and other feed grains were expected to be increased as well as the land for growing those crops. 1. Total annual demands for nitrogen, phosphorus and potassium fertilizers were estimated 1,050,000M/T, 1,110,000M/T, 1,280,000M/T and 1,010,000M/T for the year 1982, 1986, 1991, and 1996 respectively. 2. It was assumed that there would be difficulties in self-sufficiency of grains at the cost of the maximum utilization of land and fertilizers in 1996. 3. It was clear that the increase of the productivity per unit area is possible by improving the conditions of arable land which could resulted a self-sufficiency of food in Korea. As a consequence, the demand for fertilizers at that time would exceed the level of estimates. 4. The recent decrease in demand for commercial fertilizers (currently estimated 850,000M/T) was due to an inadequate application of fertilizers for respective crop reqirement. This inadequacy should be checked and encouraged the consumptions of fertilizers to be increased by supporting the price of grain.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.2
• /
• pp.278-286
• /
• 2003

Alcohol is well known agent which can damage the human tissues such as liver via stimulating lipid peroxidation. On the other hand, carotenoids in addition to vitamins A, C and I play important roles in protecting these oxidative damages as well as preventing the production of free radicals. This study was carried out to investigate the effect of dietary vitamin A on lipid peroxidation and antioxidants status in ethanol-treated rats. In the experiment, male Sprague-Dawley rats weighing 160~180 g were given a liquid diet containing 36% of total calories as ethanol for 7 weeks. The pair-fed control rats received an isocaloric amount of diet containing sucrose instead of ethanol on the following day Additionally, the liquid diet contained adequate amount of $\beta$-carotene, retinyl acetate or 13-sis-reinoic acid except vitamin A-deficient diet. The results obtained are as follows. The levels of plasma and hepatic lipid peroxide were increased after chronic ethanol feeding in rats. Retinyl acetate supplementation significantly reduced lipid peroxidation induced by ethanol feeding Glucose 6-phosphatase activity was significantly reduced in rats fed vitamin A-deficient diet with ethanol and alkaline phosphatase activity was significantly induced in rats fed 13-cis-reinoic acid diet with ethanol. Catalase and alcohol dehydrogenase activities did not show a consistent tendency in experiment groups. The hepatic antioxidant enzyme activities did not significantly changed by chronic ethanol feeding groups. The striking decrease in conversion of $\beta$-carotene to retinol was observed in rats fed a $\beta$-carotene diet with ethanol feeding The level of retinol and retinoic acid in plasma and liver was decreased after chronic ethanol administration Based on this result, these data suggest that ethanol feeding enhances oxidative stress especially in those fed a vitamin A-deficient diet, and vitamin A supplementation, especially, retinyl acetate intake can prevent enhanced lipid peroxidation and related damage to some extent.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.156-168
• /
• 2012

Chrysanthemum is a cut flower species that normally lasts for 1 to 2 weeks, in some cases 3-4 weeks. This has been attributed to low ethylene production during senescence. Reduction in cut flower quality has been attributed to the formation of air embolisms that partially or completely blocks the water transport from the vase solution to the rest of the cut flower stem, increasing hydraulic resistance which may cause severe water stress, yellowing, wilting of leaf, and chlorophyll degradation. Standard type chrysanthemum can be harvested when buds were still tightly closed and then fully opened with the simple bud-opening solution. Standard type chrysanthemum can also be harvested when the minimum size of the inflorescence is about 5-6 cm bud which opened into the first flower full-sized flower. While spray varieties can be harvested when 2-4 most mature flowers have opened (40% opening). Cut flowers are sorted by stem length, weight, condition, and so on. Standard chrysanthemum is 80 cm length for standard type and 70cm for spray type. Pre-treatment with a STS, plant regulator such as GA, BA, 1-MCP, chrysal, germicide, and sucrose, significantly improved the vase life and quality of cut flowers. It is well established that vase solutions containing sugar can improve the vase life of cut chrysanthemum. Chrysanthemum is normally packed in standard horizontal fiberboard boxes. Chrysanthemum should normally be stored at $5{\sim}7^{\circ}C$. Precooling resulted in reduction in respiration, decomposition, and transpiration activities as well as decoloration retardation. There was significant difference between "wet" storage in 3 weeks and "dry" storage in 2 weeks. In separate pulsing solution trials, various germicides were tested, as well as PGRs to maintain the green color of leaves and turgidity. Prolonging vase life was attained with the application of optimal solution such as HQS, $AgNO_3$, GA, BA and sucrose. This also retarded senescence in leaves of cut flower stems. Fresh cut chrysanthemum can be transported using a refrigerated van with $5{\sim}7^{\circ}C$. Increasing consumption and usage of cut chrysanthemum of various cultivars would require efficient transport system, and effective information exchange among producer, wholesaler, and consumer.

• Composites Research
• /
• v.36 no.1
• /
• pp.1-15
• /
• 2023

Demand for energy consumption reduction is increasing according to the development expectations of future mobility. Lightweight structural materials are known as a method to reduce greenhouse gas emissions and improve energy efficiency. In particular, fiber reinforced polymer composite (FRP) is attracting attention as a material that can replace existing metal alloys due to its excellent mechanical properties and light weight. In this paper, industrial applications and research trends of carbon fiber reinforced composites (CFRP, carbon FRP) and self-reinforced composites (SRC) were reviewed based on the reinforcement, polymer matrix, and manufacturing process. In order to overcome the expensive process cost and long manufacturing time of the epoxy resin-based autoclave method, which is mainly used in the aircraft field, mass production of CFRP-applied electric vehicles has been reported using a high-pressure resin transfer molding process including fast-curing epoxy. In addition, thermoplastic resin-based CFRP and interface enhancement methods to solve the recycling issue of carbon fiber composites were reviewed in terms of materials and processes. To form a perfect matrix-reinforcement interface, which is known as the major factor inducing the excellent mechanical properties of FRP, studies on SRC impregnated with the same matrix in polymer fibers have been reported. The physical and mechanical properties of SRC based on various thermoplastic polymers were reviewed in terms of polymer orientation and composite structure. In addition, a copolymer matrix strategy for extending the processing window of highly drawn polypropylene fiber-based SRC was discussed. The application of CFRP and SRC as lightweight structural materials can provide potential options for improving the energy efficiency of future mobility.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.183-189
• /
• 2017

This study investigated the synergistic effect of single inoculation and co-inoculation of phosphate-solubilizing bacteria (PSB) Burkholderia metallica JH-7 and Burkholderia contaminans JH-15. Phosphate-solubilizing abilities of these strains were assessed by measuring phosphorus content in culture media that were singly inoculated or co-inoculated with these strains for 7 days. B. metallica JH-7 was found to release the highest content of soluble phosphorus ($140.80{\mu}g\;mL^{-1}$ ) into the medium, followed by single inoculation of B. contaminans JH-15 ($135.95{\mu}g\;mL^{-1}$ ) and co-inoculation of two strains ($134.84{\mu}g\;mL^{-1}$ ). The highest pH reduction, organic acid production, and glucose consumption were observed in the medium inoculated with B. metallica JH-7 alone compared with that in the medium co-inoculated with both the strains. Results of a plant growth promotion bioassay showed 17.4% and 7.48% higher leaf and root growth, respectively, in romaine lettuce inoculated with B. metallica JH-7 alone than in romaine lettuce inoculated with a control strain. However, no significant difference was observed between single inoculation and co-inoculation of these strains with respect to phosphorus release and plant growth. Although the results of the present study did not show the synergistic effect of phosphate solubilization by the PSB strains examined, these results indicate that treatment with PSB exerts a beneficial effect on crop growth.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.4
• /
• pp.358-383
• /
• 2015

The concept of 'carbon footprint' has been developed as a means of quantifying the specific emissions of the greenhouse gases (GHGs) that cause global warming. Although there are still neither clear definitions of the term nor rules for units or the scope of its estimation, it is broadly accepted that the carbon footprint is the total amount of GHGs, expressed as $CO_2$ equivalents, emitted into the atmosphere directly or indirectly at all processes of the production by an individual or organization. According to the ISO/TS 14067, the carbon footprint of a product is calculated by multiplying the units of activity of processes that emit GHGs by emission factor of the processes, and by summing them up. Based on this, 'carbon labelling' system has been implemented in various ways over the world to provide consumers the opportunities of comparison and choice, and to encourage voluntary activities of producers to reduce GHG emissions. In the agricultural sector, as a judgment basis to help purchaser with ethical consumption, 'low-carbon agricultural and livestock products certification' system is expected to have more utilization value. In this process, the 'cradle to gate' approach (which excludes stages for usage and disposal) is mainly used to set the boundaries of the life cycle assessment for agricultural products. The estimation of carbon footprint for the entire agricultural and forestry sector should take both removals and emissions into account in the "National Greenhouse Gas Inventory Report". The carbon accumulation in the biomass of perennial trees in cropland should be considered also to reduce the total GHG emissions. In order to accomplish this, tower-based flux measurements can be used, which provide a direct quantification of $CO_2$ exchange during the entire life cycle. Carbon footprint information can be combined with other indicators to develop more holistic assessment indicators for sustainable agricultural and forestry ecosystems.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.91-104
• /
• 2005

In the past, the design education focused on the technique and skill to satisfy the production and consumption activities of a corporation based on beauty and practicality in the industrial age. Now, it's time to switchover to a life-quality enhancing education by harmonizing and meeting the public's physical and mental needs because design education is a character education which enhances the quality of life by uplifting people's aesthetic sense. This paper has emphasized on the importance of public education of design through the theoretical investigation on social environmental changes caused by the emergence of information society,,education problems, public education, and the necessity of design education. The reason why this study should be done has been suggested by investigating the necessity of this research and bringing up the issue. Furthermore, the current status and problems of public education on design have been analyzed. Then, based on the result, the development direction of design education has been suggested. This study can be concluded as follows: First, the design education should change from its vertical structure to a horizontal one. It should be widely spread to the public, getting off from its privatization for a certain group. Second, designers and the public should correct their way of thinking about design. The ordinary people as well as the designers should cultivate their capability to find and take care of design related issues in their everyday lives. Third, all people should be the subject of design education for the public. As a part of cultural education on the public's aesthetic sense, design education should be reborn as a field of study in which a sound public culture can be developed by the integration of human life and culture, exceeding the limit of school curriculum.