• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.593-602
• /
• 2016

Numerical simulations on the close-coupled supersonic gas atomizer for metallic powder production were performed in this study. A proper turbulence model was chosen and then VOF(Volume of Fluid) and DPM(Discrete Phase Model) methods were sequentially applied for the simulations of primary and secondary break-up processes of liquid metal. Diameters of parent droplets were calculated by analyzing Level-Set function contour from the VOF result. Finally, the distribution of particle diameter was obtained from the DPM result at exit of the computational domain.

• Journal of Korean Society of Transportation
• /
• v.8 no.2
• /
• pp.77-97
• /
• 1990

Compared to modal split, the methods of forecasting traffic volumes diverted in various types of I.C.s have not been sufficiently studied. The purpose of this study is to derive a new diversion function that can represent the directional traffic volume in accordance with various geometrics of I.C.s. In general, knowing various traffic impedances and the amount of traffic production and attraction, one can estimate proper traffic volumes associated with directions by using a well-defined diversion function. This function is usually made by a series of process such as surveying directional traffic volumes on several I.C.s, analyzing with a regression method and verifying those results by statistical approaches. The function has been developed by rigorous statistical testings, mainly a regression analysis. This paper presents an effective method in planning and designing new roads, I.C.s and route choice of subway. Finally, some comparisons and improvements and suggested when one uses different types of relevant models and functions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1084-1093
• /
• 2000

An in vitro gas production system was used to investigate the influence of various substrate mixtures on a natural mix of rumen microbes by measurement of fermentation end-products. The treatments were combinations of cassava (15.0, 30.0 and 45.0%) with different roughage sources (ruzi grass, rice straw or urea treated rice straw). Microbial biomass, net $^{15}N$ incorporation into cells, volatile fatty acid production, gas volume and rate of gas production increased linearly with increasing levels of cassava inclusion. There was also an effect of roughage source, with rice straw being associated with the lowest values for most parameters whilst similar values were obtained for ruzi grass and urea treated rice straw. The results suggest that microbial growth and fermentation rate increase as a function of readily available carbohydrate in the substrate mixture. A strong linear relationship between $^{15}N$ enrichment, total volatile fatty acid production and gas production kinetics support the suggestion of the use of the in vitro gas production system as a tool for screening feedstuffs as an initial stage of feed evaluation.

• The Research Journal of the Costume Culture
• /
• v.17 no.4
• /
• pp.723-732
• /
• 2009

The quick response(QR) system is very popular in Korean apparel companies. However, the usage of QR system was not known well. The purpose of this study is to identify the usage of the quick response decision support system(QR DSS) and postponement manufacturing in the Korean apparel company. The researched company was the only one which used the QR DSS. The researchers carried out the depth interview with the QR decision makers of the company. This company had 14 brands, and had used the QR DSS since January, 2008. The results are as follows: The QR DSS was supportive computer software program, and it helped the staffs to make agile decision about QR repeat production of clothing. The QR DSS automatically calculated the related data, and suggested the expected sales volume and the proper supply amounts of the styles. There were four functions in QR DSS : 'QR Alert', 'Proper Supply Amount Simulation', 'Sensible QR', and 'Supply/Sales Simulation by Item'. The men's clothing brands effectively used 'Supply/Sales Simulation by Item' function. And the women's clothing brands effectively used 'QR Alert' function. This company also used the postponement production system for QR repeat production. The postponement production was conducted with four methods : the yarn stocking, the grey fabric stocking, the dyed fabric stocking, and the fabric sourcing. The men's clothing brands usually used of the yarn stocking methods and the dyed fabric stocking methods. The women's clothing brands usually used the grey fabric stocking methods. By using QR DSS and postponement production system the company was able to shorten the lead time for QR decision making.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.313-320
• /
• 2021

This study develops a demand and supply model and price model for Miryang sesame leaf cultivation and predicts the optimal production level to maximize total profit for Miryang sesame leaf farms. We used time series data from 1996 to 2017, which are related to Miryang sesame leaf cultivation. For the analysis, we estimated the demand function and average cost function, calculated the optimal production level and price, and derived the optimal profit. In addition, we predicted the optimal production level, price, total revenue, total cost, and profit until the year 2030 through scenario analysis. The results show that the optimal production level until the year 2030 is between 10 and 12.5 thousand tons, while the production volume was 7 thousand tons in 2017, and total profit for Miryang sesame leaf farms is estimated at 13.3 to 21.3 billion Korean won in 2030. The producer group needs to maintain the optimal production level to maximize total profit for farmers, as suggested in this study.

• Fisheries and Aquatic Sciences
• /
• v.3 no.2
• /
• pp.156-162
• /
• 2000

Model experiments for a purse seine were carried out in order to measure the geometry of net shape and to estimate an enclosed volume by using 1177 scale model purse seine of 12.62m float line from an offshore mackerel purse seine. A model purse seine was set from a net box of shooting equipments and then pursing and hauling net by hauling equipment. The 3- D geometry shape of the purse seine net during hauling operation was measured by video image processing and tension of purse line by load cell. The 3-D geometry of the model purse seine during hauling operation could be represented with variables such as a ratio of shooting diameter or maximum net depth and a ratio of hauling operation time. Horizontal shapes of float line and lead line were varied from a circle after shooting to an ellipse with pursing and hauling. Projected lateral shape of purse line was observed and formulated as a shape of a water drop. The cross sectional shapes of curved net from two directions were varied such as sine function or polynomial curves. Therefore, enclosed volume of a purse seine in relation to fish school behaviour can be approximated using two main variables from relevant equations.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.5 no.6
• /
• pp.69-78
• /
• 1982

Traditional CVP (Cost-Volume-Profit) analysis employs linear cost and revenue functions within some specified time period and range of operations. Therefore CVP analysis is assumption of constant labor productivity. The use of linear cost functions implicity assumes, among other things, that firm's labor force is either a homogenous group or a collection homogenous subgroups in a constant mix, and that total production changes in a linear fashion through appropriate increase or decrease of seemingly interchangeable labor unit. But productivity rates in many firms are known to change with additional manufacturing experience in employee skill. Learning curve is intended to subsume the effects of all these resources of productivity. This learning phenomenon is quantifiable in the form of a learning curve, or manufacturing progress function. The purpose d this study is to show how alternative assumptions regarding a firm's labor force may be utilize by integrating conventional CVP analysis with learning curve theory, Explicit consideration of the effect of learning should substantially enrich CVP analysis and improve its use as a tool for planning and control of industry.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.279-284
• /
• 2007

Elasto-forming has been dedicated to specific and limited production. Today, using enhanced pad materials, it has become an efficient and economical process alternative for low and medium volume metal-forming production. The non-linear properties of elastomer which are described as strain energy function are important parameter to design and evaluate of elastomer component. These are determined by material tests which are uni-axial tension and bi-axial tension. In order to investigate the design paramerer, Finite element analysis was carried out for elasto-forming process.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.4
• /
• pp.73-80
• /
• 2004

A dual purpose robot automation system is developed for both arc welding and spot welding by one robot within a cell. The need for automation of both arc welding and spot welding processes is urgent while the production volume is not so big as to accommodate separate station for the two processes. Also, space is too narrow for separate station to be settled down in the factory. A spot welding robot is chosen and the function for arc welding are implemented in-house at cost of advanced functions. For the spot welding, a single pole type gun is used and the robot has to push down the plate to be welded, which causes the robot positioning error. Therefore, position error compensation algorithm is developed. The basic functions for the arc welding processes are implemented using the digital I/O board of robot controller, PLC, and A/D conversion PCB. The weaving pattern is taught in meticulously by manual teach. A fixture unit is also developed for dual purpose. The main aspects of the system is presented in this paper especially in the design and implementation procedure. The signal diagrams and sequence logic diagrams are also included. The outcome of the dual purpose welding cell is the increased productivity and good production stability which is indispensable for production volume prediction. Also, it leads to reduction of manufacturing lead time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.9
• /
• pp.1278-1285
• /
• 2008

Measurement of gas produced during in vitro fermentation was used to investigate the fermentation characteristics and interactions of rice straw, wheat straw or maize stover mixed with alfalfa or clover at proportions of 100:0, 75:25, 50:50, 25:75 and 0:100, respectively. Cumulative gas production was recorded at 2, 4, 8, 12, 16, 24 and 48 h of incubation, and the Gompertz function was used to describe the kinetics of gas production. In vitro dry matter and organic matter disappearances (IVDMD and IVOMD) were determined after 48 h incubation. The rate of gas production of clover was higher (p<0.05) than that of rice straw, wheat straw, maize stover and alfalfa when straws and hays were incubated separately. Increasing the proportion of alfalfa in the straw-alfalfa mixtures increased (p<0.05) the rates, but not the maximum volume of gas production. However, both rate and the maximum volume of gas production were increased (p<0.01) as the proportions of clover increased in the straw-clover mixtures. The cumulative gas production at 48 h, IVDMD and IVOMD showed no consistent interaction effects between different mixtures of cereal straws and hays. The extent of interactive effects was affected by the types of cereal straw, legume hay and their proportions in the mixture. The appropriate combination for the mixture of rice straw or maize stover with leguminous hays was 75:25 and 25:75, respectively. The better combination occurred at a proportion of 50:50 for the mixture of wheat straw and alfalfa. We conclude that the suitable proportion of low-quality straw and high quality legume hay combination should be considered in the ration formulation system of ruminants according to the extent of positive interactive effects.