• Journal of Environmental Impact Assessment
• /
• v.24 no.1
• /
• pp.35-50
• /
• 2015

The purposes of this study are to apply species distribution modeling in urban management planning for habitat conservation in non-urban area and to provide a detailed classification method for management zone. To achieve these objectives, Species Distribution Model was used to generate species richness and then to compare with the results from land suitability assessment. 59 species distribution models were developed by Maxent. This study used 15 model variables (5 topographical variables, 4 vegetation variables, and 6 distance variables) for Maxent models. Then species richness was created by sum of predicted species distributions. Land suitability assessment was conducted with criteria from type I of "Guidelines for land suitability assessment". After acquiring evaluation values from species richness and land suitability assessment, the results from these two models were compared according to the five grades of classification. The areas with the identical grade in Species richness and land suitability assessment are categorized and then compared each other. The comparison results are Grade1 10.92%, Grade2 37.10%, Grade3 34.56%, Grade4 20.89% and Grade5 1.73%. Grade1 and Grade5 showed the lowest agreement rate. Namely, development or conservation grade showed high disagreement between two assessment system. Therefore, the areas located between urban, agriculture, forest, and reserve have a tendency to change easily by development plans. Even though management areas are not the core area of reserve, it is important to provide a venue for species habitat and eco-corridor to protect and improve biodiversity in terms of landscape ecology. Consequently, adoption of species richness in three levels of management area classification such as conservation, production, planning should be considered in urban management plan.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.6
• /
• pp.880-884
• /
• 2001

Rumen microbiology research has undergone several evolutionary steps: the isolation and nutritional characterization of readily cultivated microbes; followed by the cloning and sequence analysis of individual genes relevant to key digestive processes; through to the use of small subunit ribosomal RNA (SSU rRNA) sequences for a cultivation-independent examination of microbial diversity. Our knowledge of rumen microbiology has expanded as a result, but the translation of this information into productive alterations of ruminal function has been rather limited. For instance, the cloning and characterization of cellulase genes in Escherichia coli has yielded some valuable information about this complex enzyme system in ruminal bacteria. SSU rRNA analyses have also confirmed that a considerable amount of the microbial diversity in the rumen is not represented in existing culture collections. However, we still have little idea of whether the key, and potentially rate-limiting, gene products and (or) microbial interactions have been identified. Technologies allowing high throughput nucleotide and protein sequence analysis have led to the emergence of two new fields of investigation, genomics and proteomics. Both disciplines can be further subdivided into functional and comparative lines of investigation. The massive accumulation of microbial DNA and protein sequence data, including complete genome sequences, is revolutionizing the way we examine microbial physiology and diversity. We describe here some examples of our use of genomics- and proteomics-based methods, to analyze the cellulase system of Ruminococcus flavefaciens FD-1 and explore the genome of Ruminococcus albus 8. At Illinois, we are using bacterial artificial chromosome (BAC) vectors to create libraries containing large (>75 kbases), contiguous segments of DNA from R. flavefaciens FD-1. Considering that every bacterium is not a candidate for whole genome sequencing, BAC libraries offer an attractive, alternative method to perform physical and functional analyses of a bacterium's genome. Our first plan is to use these BAC clones to determine whether or not cellulases and accessory genes in R. flavefaciens exist in clusters of orthologous genes (COGs). Proteomics is also being used to complement the BAC library/DNA sequencing approach. Proteins differentially expressed in response to carbon source are being identified by 2-D SDS-PAGE, followed by in-gel-digests and peptide mass mapping by MALDI-TOF Mass Spectrometry, as well as peptide sequencing by Edman degradation. At Ohio State, we have used a combination of functional proteomics, mutational analysis and differential display RT-PCR to obtain evidence suggesting that in addition to a cellulosome-like mechanism, R. albus 8 possesses other mechanisms for adhesion to plant surfaces. Genome walking on either side of these differentially expressed transcripts has also resulted in two interesting observations: i) a relatively large number of genes with no matches in the current databases and; ii) the identification of genes with a high level of sequence identity to those identified, until now, in the archaebacteria. Genomics and proteomics will also accelerate our understanding of microbial interactions, and allow a greater degree of in situ analyses in the future. The challenge is to utilize genomics and proteomics to improve our fundamental understanding of microbial physiology, diversity and ecology, and overcome constraints to ruminal function.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.109-118
• /
• 1993

Development process of agricultural technology has been studied with a case study of Korean agriculture. Technological is considered as a transformer of inputs into outputs and hence technological appropriateness, an important aspect of agricultural development strategies, is considered as a dynamic concepts. Considering the concept of agricultural system as a delivery system for providing essential materials and services to producers and consumers, it has been divided into two major groups of dimensions vis. external challenge dimensions and internal response dimensions. Market, investment and agro-ecosystem constitute the external challenge dimensions : whereas trade , technology as well as production and resources allocation constitute internal response dimensions. The system manager is responsible for maintaining equilibrium in the mentioned six sub-systems. Two kinds of alternatives paths of technological development viz. land saving technology and labour saving technolog have been studied. Technology is considered as a combination of four basic components viz. facilities, abilities, facts and frameworks. Adoption of innovation in agriculture depends on profitability, awareness, risk aversion, financial capacity, institutional infrastructure, availability of physical inputs and adaptability to the local conditions. For a cast study of Korea, changes in the agricultural system through external challenge dimensions are investigated. The impacts of industrialization on agro-ecosystem reported are shift of labour from the agricultural sector to non-agricultural sectors and continuously increasing demand of farm the agricultural sector to non-agricultural sectors accompanied by increase in land prices. The impacts on the commodity market discussed are shift in demand from rice, barley and other cereals to meat , dairy products and vegetables : and increasing in supply capacity of agricultural inputs. The process of agricultural development from 1962 to 19 1 9 (i.e. from start of the first to the end of the sixth five year plan) are also discussed in details with several policy measures taken. The trend of agricultural income and productivity are also analyzed. The main cause of increase in the agricultural income is considered as increase in labour productivity. The study revealed that during the span of 1965-88, holding size has not changed significantly, but both the land and labour productivity increased and so did the agricultural income. R&D activities in Korea have changed over time in three stages vix. import of improved technology, localization by adaptive research and technological mastery. For the new technology to be made affordable to farmers, policy measures like fertilizer and food grain exchange system, dual price system in rice and barely and loan for machinery were strengthened.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.456-471
• /
• 2018

A Comparative Study on the Korean animation industry and 3 of this paper is a matter of Korea, China, Chinese animation industry and the Current Status and Problem of Chinese animation business in overseas markets.Aimed to find ways to expand exports. In order to realize this purpose with theoretical backgrounds, such as animation concept and characteristics of the research literature, look at ways a paper from an animation industry, work, China.Chinese animation development plan based on the bibliographic data and case study based on books. First, by government in terms of development measures and supplement the system and a law on the animation industry. First of all animation industry and producers To help protect the government is to become an active policy must be supported with funds and animation to ease the relevant laws and regulations and joint venture with foreign countries.Pursuing an active policy is needed. Second, an animated feature can get the full benefit of the industrial chain to and create derivative works as a multilateral needs to be improved. Third, the animation expertise to build human resources need to be nurtured. Fourth, in order to cater to overseas markets in China will create various types of Chinese traditional culture based on the animation is important. Fifth, and a mobile home page to get in. Sixth, will be easily exported to overseas markets to the creation of joint international exchange and international.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.14-21
• /
• 2018

The rapid increase in the consumption of products that contain rare metals has highlighted the importance of recycling and recovering resources from these products when they enter the waste stream. Among various metal resources that can be recovered, this study analyzes the waste streams of cobalt and palladium to determine how their waste resource circulation can be improved at each stage of the waste stream. The findings of this study point to improvements and strategies that can be made at individual stages. First, at the discharge/import stage, the implementation of tariff quotas for specific recycled metal resources is suggested to allow the systemic categorization of waste metals as resources. At the collection/discarding stage, a major problem is the instability in the supply of scrap metals, which may be better managed by changing the bidding process for the scrap metals. At the pretreatment stage, possible areas for improvement are uncovered concerning technical areas, such as technological development and improving the efficiency of material recycling, as well as policy-wise, for instance, expanding the regulation for manufacturers to produce products that are designed to facilitate resource recovery, increasing incentive for closed recycling, and refining the guidelines and standards for recycling. At the resource recovery stage, as the waste metal recycling industry consists of businesses that vary in size, policies to promote cooperation and coexistence between large and smaller enterprises will benefit the industry in the long-run. Lastly, at the product production/export stage, a tariff on exporting waste resources that contain cobalt and palladium will help control the amount of waste metals that are shipped abroad.

• Journal of Wetlands Research
• /
• v.18 no.1
• /
• pp.100-112
• /
• 2016

In recent, the direction of water resources policy is changing from the typical plan for water use and flood control to the sustainable water resources management to improve the quality of life. This change makes the information related to water resources such as data collection, management, and supply is becoming an important concern for decision making of water resources policy. We had analyzed the structured data according to the purpose of providing information on water resources. However, the recent trend is big data and cloud computing which can create new values by linking unstructured data with structured data. Therefore, the trend for the management of water resources information is also changing. According to the paradigm change of information management, this study tried to suggest an application of big data and cloud computing in water resources field for efficient management and use of water. We examined the current state and direction of policy related to water resources information in Korea and an other country. Then we connected volume, velocity and variety which are the three basic components of big data with veracity and value which are additionally mentioned recently. And we discussed the rapid and flexible countermeasures about changes of consumer and increasing big data related to water resources via cloud computing. In the future, the management of water resources information should go to the direction which can enhance the value(Value) of water resources information by big data and cloud computing based on the amount of data(Volume), the speed of data processing(Velocity), the number of types of data(Variety). Also it should enhance the value(Value) of water resources information by the fusion of water and other areas and by the production of accurate information(Veracity) required for water management and prevention of disaster and for protection of life and property.

• Spatial Information Research
• /
• v.12 no.3
• /
• pp.285-298
• /
• 2004

Transportation digital map has built based on NGIS (national geography institute's 1 :5000 digital database) which derived from the aerial photo materials. Transportation digital map is a part of National Transportation Database Building Project carried out by the Korea Transport Institute and Ministry of Construction and Transportation. Transportation digital map for the purpose of transportation plan and investment has been updated and corrected the NGIS database especially for road network. Transportation digital map database is essential basic data fully applied for transportation policy and planning. The database must be reliable and objective to be applied for national transportation policy decision and transportation analysis. In addition, it needs accuracy and currentness to reflect the road network for the survey year. To satisfy the purpose of the database, following steps are necessary first, data Production and building has to be done by guideline of survey and database building. Secondly, geometric and logical errors which can occur during the survey and database building should be carefully detected. Thirdly, sectional guideline for database examination and procedure needs to be set up systematically and coherently This study is about examination guidelines for section and procedure on nodes and links which are essential object in transportation digital map database. According to the type of error, consistent and systematic error examination can lead to quality guarantee for objective and reliable database.

• Korean Journal of Agricultural Science
• /
• v.37 no.3
• /
• pp.393-398
• /
• 2010

Early pregnancy diagnosis of bovine is an essential component for efficient reproductive plan in farms because long term of non-pregnancy results in economic losses by failure of offspring production and low milk yield in dairy cattle. The major steroid hormones related with reproduction are known to be progesterone and estrogen in bovine pregnancy. To evaluate detection level of hormones in milk, plasma and milk progestrone and estrogen of Holstein cows was analyzed during artificial insemination (AI) and embryo transfer (ET). Progesterone concentration at 21 days postestrus was significantly different in plasma and milk between pregnant and non-pregnant cows. Estrogen concentration at estrus was higher in pregnant recipients than that in non-pregnant recipients. To analyze correlation between hormone levels and conception rates in Holstein, the conception and return rates were checked following AI, and the returned cows were on the track of pregnancy after consecutive AI. Pregnant cows following first AI were considered as high conception group while pregnant cows following third AI were rated as low conception group. Proportion of high and low conception groups in this study was 78.2% and 9.1%, respectively. Hormone analysis indicated that high conception group had higher estrogen level during estrus than low conception group ($26.45{\pm}3.32$ vs $19.017{\pm}2.97$). Progesterone level was not different between high and low conception groups during estrus but increased significantly after 21 days postestrus (21 day: $4.95{\pm}1.12$ vs $0.95{\pm}0.23$, 35 day: $12.47{\pm}3.82$ vs $2.41{\pm}1.21$). In conclusion, the pattern of progesterone and estrogen secretion in Holstein milk samples could be a good candidate for early pregnancy detection and selection of recipients during ET.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.69-70
• /
• 2013

IPCC (International Panel on Climate Change) reported that the arctic sea-ice extent has been decreased by 2.7% per decades since satellite observations in 1978. The decreased sea-ice extent has gained an international attention due to its economical benefits from the NSR (Northen Sea Route). The NRS - not a clearly defined single route, but a number of alternative routes across the top of Russiahas a 37 % reduction in sailing distance, comparing to the SSR (Southen Sea Route) passing thourgh the Suez Canal. Sailing days are consequently reduced from 30 days to 20 days. Also, it is estimated that the Northen Sea has 20 to 25% of world's oil resources and occupies 40% of the world's fishery production. As Republic of Korea was admitted as an observer to the Arctic Council on May 15, 2013, there has been increasing needs to explore new route in the Northen Sea. In this situation, Korea Institute of Ocean Science & Technology (KIOST) is preparing a plan for the development of Arctic-circle Ocean Environmental Information System to support the ice navigation and resource exploration in the Arctic. We will introduce a conceptual design of a satellite-based ice navigation supporting system for the northern sea route.