• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.59-67
• /
• 2016

In landscape design by public institutions, although the costs and species of landscape trees stipulated by the Korean Public Procurement Service(PPS) are generally adhered to, the PPS regulations about planting trees with well-developed rootlets are almost entirely neglected. This study aimed to evaluate the performance of buried container modules, which are a new technology and product in landscape production that is able to reduce the defect rate while complying with regulations. To this end, this study measured rootlet density, rootlet development length, rootlet survival rate on excavation, and impairments of tree growth for 3 months after root pruning, and compared these variables for the container modules with those for trees that underwent root pruning in bare ground, and those that were cultivated in a container above ground. The results were as follows: First, the rootlet density was 88% for the trees in container modules, which was very high. Trees that underwent standard root pruning in bare ground had a somewhat lower density of 64%. Meanwhile, the trees that were cultivated in pots above ground died, invalidating measurement. Second, in terms of rootlet development and rootlet survival rate, the trees in container modules showed a mean length of 10.4cm, and 100% survival rate, indicating that there was no rootlet damage caused by excavation. For the trees that only underwent root pruning in bare ground, the mean length was 25.6cm and the rootlet survival rate was only half that of the trees in container modules, at 56%, demonstrating considerable damage. Rootlet development did not occur at all in the trees grown in pots. Third, the trees in container modules and those that underwent root pruning in bare ground did not show any deaths during the root pruning process, or any impairments such as stunted leaf growth. Conversely, the trees grown in pots nearly all died, and severe impairments of tree growth were observed. As shown by the results above, when we evaluated the performance of buried container modules, they showed the most outstanding performance of the three models tested in this study. The container modules prevent defects by stimulating early rooting in environments that with poor conditions for growth, or in trees that are not suited to the summer environment Therefore, it is expected that they would be an optimal means by which to enable compliance with rules such as the regulation presented by the PPS.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.58-68
• /
• 2014

Christian Cay Lorenz Hirschfeld is often regarded as 'a father of landscape garden art.' He was an aesthetics professor and garden theoretician in the $18^{th}$ century. He put forth the most comprehensive garden theory book in five volumes between 1779 and 1785. His book, Theorie der Gartenkunst, was translated and widely circulated in his contemporary. The book, which dealt with diverse aspects of garden art such as history, design, material, and type, urged to promote the prevalence of landscape garden in European continents as well as in Germany. However, there have scarcely been discourses in the Hirschfeld's garden theory. This essay aims to review Hirschfeld's garden thoughts in his book critically and to reinterpret some issues in the contemporary landscape theory and practice. Hirschfeldian theory was the product of $18^{th}$ century German Enlightenment and romanticism. At that time, Nature was regarded as divine realm. There was a German affinity with natural world. The spread of reading culture and the fashion of travel literature were another background of the success of his garden literature. Several issues in Hirschfeld garden theory will discussed here. First, privileging garden art was the most significant contribution in his theory. He emphasized that garden art was the most advanced art form among all art genres. Second, garden art was grounded on the mimesis of nature. The ambiguous relationship between nature and art still existed in garden making. However, garden art can be flourished when utilizing the potency of nature in itself. Third, there was the association between the image and the idea in experiencing the garden. Some garden scenes stimulated the related emotional responses such as cheerful and merry, softly melancholic, romantic, solemn etc. Fourth, the movement was the essential aspect of garden art. Motion and emotion are come together in garden experience. To represent the landscape garden style in suitable way, the sketch or image seems to be preferable than the plans and views. Finally, garden art was composing of not only the physical space but also the spirit of place. He maintained the garden art as hortus moralis should be a social metaphor. Hirschfeldian garden theory has often been criticized as the lack of practical power and the old fashioned idea. However, his theory influenced on formulating the idea of public park in $19^{th}$ century. Moreover, there are still some visionary aspects of his theory such as the reevaluation of garden art, the emphasis of locality and the introduction of Mittelweg idea. Recently, gardening culture are prevalent in various realms of art and life. Hirschfeld's garden theory as humanistic landscape theory can provide us some insights in the contemporary practices.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.557-566
• /
• 2005

In preparation of steamed foam-cakes, effects of whipping time, amount of wheat flour, and amounts of emulsifier on physical properties of the steamed foam cakes were investigated using RSM (response surface methodology). The three independent variables selected for the RSM experiment were whipping time $(X_1)$, amount of wheat flour $(X_2)$, and amounts of wheat flour $(X_2)$, and concentration of emulsifier $(X_3)$ were set for single-stage mixing, respectively. A rotatable central composite design was used for treatment arrangement. The responses from the product for loaf volume, color values and textural properties were analysed. In the analysis of variance for the foam cakes prepared by single-stage method, significant interactions were observed between independent variables (experimental factors) and physical property like loaf volume (p<0.05); textural properties like hardness, gumminess, and chewiness (p<0.05). Among independent variables, concentration of emulsifier had the most effects on physical properties while whipping time. The ordinary points in surface response showed maximal points with physical property like colorimetric b value while other properties revealed saddle points. The 3-dimensional response surface graphs of the predicted regression models displayed decreasing loaf volumes with increasing whipping times and emulsifier concentrations beyond optimum levels. The optimum conditions for best loaf volume and textural property (hardness, gummimess and chewiness) of the products selected by extracting intersectional areas of the contour maps that commonly overlapped all characteristics were; $11\~13$ min whipping time, $470\~486\;g$ amount of wheat flour, and $19\~20\;g$ emulsifier concentration, in case of single-stage method. The median values extracted from the RSM experimental results for optimum manufacturing conditions for single-stage method, i.e., 12 min whipping time, 478 g amount of wheat flour, and 20 g emulsifier concentration were empirically proven to fit the predicted levels of physical properties from the final foam cakes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.476-483
• /
• 2005

This experiment was planned to develop a functional supplement by food resources to prevent and lessen the deleterious effects caused by environmental pollutants such as polluted food, air, water and heavy metals. The goal of this study was to investigate the effects of peking-duck extracts supplemented with six kinds of medicinal herbs (DJ) on the intoxication of lead and mercury in rats. Sprague-Dawley rat weighing $150g\pm15g$ g, were randomly assigned to 5 groups, basal diet only (NCG), heavy metal without DJ injection (HCG), heavy metals and DJ (3 mg/mL) injection (HMLD), heavy metal and DJ (30 mg/mL) injection (HMMD), heavy metal and D] (300 mg/mL) injection (HMHD). Mecury (Hg) and lead (Pb) injected at the level of 50 ppm for 17 days. Also DJ oral feeding was continued for 31 days. The result of this study were as follows; Food intake and body weight gain in heavy metal administered groups were lower than those of control group (NCG). The activities of GOT, GPT and BUN level were significantly reduced in DJ-treated groups as compared to HCG. DJ was shown to suppress the accumulation of Hg and Pb in serum. The results suggest that DJ might have protective effect on Hg and Pb intoxication.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.331-342
• /
• 2007

This study focused on developing MP3 smart clothing products and usability evaluation. MP3 smart clothing which was developed in this study contains e-textile keypad and a kit. The kit consists of MP3 Player, remote controller module and ear phone, and are easy to assemble and dismantle. And usability evaluation about MP3 smart Clothing which was developed in this study contains e-textile keypad and a kit. For making the MP3 Smart clothing, e-textile signal line and keypad was developed and a metal connection ring also was manufactured to adhere closely e-textile signal line to keypad. The last products are two kinds of MP3 smart clothing, jacket style of MP3-YSJ(Yonsei Smart Jacket) and safari style of MP3-YSS(Yonsei Smart Safari). Then usability evaluation conducted two times about MP3 smart clothing developed. Usability evaluation is classified by a module evaluation and an item evaluation. The module evaluation measured external appearance, material, a music controller, an ear phone(or a mini speaker) and connector. The item evaluation measured social acceptance, feeling of wearing, utility, easiness of maintenance and safety. The module evaluation described totally positive results in the first usability evaluation about MP3-YSJ 1.0 and MP3-YSS 1.0. The item evaluation shows a lower score in the social acceptance, especially the easiness of connector maintenance and the social acceptance of music-controller in MP3-YSJ 1.0 and MP3-YSS 1.0. The second usability evaluation conducted with improved products by the first usability test results. Results from second item evaluation indicated needs to improve the easiness of connector & music-controller maintenance and the social acceptance of music-controller in MP3-YSJ 2.0. In MP3-YSS 2.0, the easiness of material management and the social acceptance of music controller & connector needed to improvement. In particular, users felt inconvenience in the social acceptance because of e-textile keypad arrangement. To outweigh this disadvantage, further study is needed about keypad interface of the music controller.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.388-394
• /
• 2010

Metabolomics aims at the comprehensive, qualitative and quantitative analysis of wide arrays of endogenous metabolites in biological samples. It has shown particular promise in the area of toxicology and drug development, functional genomics, system biology and clinical diagnosis. In this study, analytical technique of MS instrument with high resolution mass measurement, such as time-of-flight (TOF) was validated for the purpose of investigation of amino acids, sugars and fatty acids. Rat urine and serum samples were extracted by selected each solvent (50% acetonitrile, 100% acetonitrile, acetone, methanol, water, ether) extraction method. We determined the optimized liquid chromatography/time-of-flight mass spectrometry (LC/TOFMS) system and selected appropriated columns, mobile phases, fragment energy and collision energy, which could search 17 metabolites. The spectral data collected from LC/TOFMS were tested by ANOVA. Obtained with the use of LC/TOFMS technique, our results indicated that (1) MS and MS/MS parameters were optimized and most abundant product ion of each metabolite were selected to be monitorized; (2) with design of experiment analysis, methanol yielded the optimal extraction efficiency. Therefore, the results of this study are expected to be useful in the endogenous metabolite fields according to validated SOP for endogenous amino acids, sugars and fatty acids.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.605-612
• /
• 2005

In previous studies, we evaluated the effect of the 6 energy-tonic or blood-building prescriptions of traditional oriental medicine, and observed that Si-Wu-Tang and Bu-Zhong-Yi-Qi-Tang showed high activity in the protection of the gastrointestinal and hematopoietic organs in irradiated mice. But any of these prescriptions did not show a high activity in the activation of the immune cells. We performed this study to design an herb mixture which protects the self-renewal tissues and also promotes recovery of the immune system against radiation damage. In order to meet all the requirements, we designed a new mixture of 3 edible herbs listed in Korean Food Code. The mixture of Angelim gigas radix, Cnidium officinale rhizoma and Paeonia japonica radix was decocted with hot water, and the activities of the water extract (HIM-I) were evaluated. HIM-1 stimulated the immune cells in a much higher extent than the traditional prescriptions, and promoted dramatically the growth of bone marrow stem cells in vitro. Also, HIM-1 protected digestive and hematopoietic organs against radiation as effectively as the 2 prescriptions, Si-Wu-Tang and Bu-Zhong-Yi-Qi-Tang. On the other hand, it showed high in vitro antioxidative activity that might be considered as a mechanism of the protective effects against radiation. Although the detailed mechanisms of those effects remain to be elucidated, these results indicated that HIM-I might be a useful agent for protection and recovery of body from various risk factor as well as radiation, especially since it is a relatively nontoxic natural product.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.2
• /
• pp.256-262
• /
• 2003

In order to design and develop a product that can treat the fatty liver, natural complex food with all natural ingredients was developed and supplemented to rats with high fat diet to induce fatty liver. As a result, when the amount of natural complex food was increased in diet of subjects, the activities of the blood serum AST, ALT, ALP, 3-GT and LDH were decreased. The total protein concentration levels of the 30% and the 50% natural complex food groups did not show changes in respect to the control group, but the 100% natural complex food groups showed significant decrease (p<0.05). Likewise, the amount of blood serum albumin in the 30% and the 50% natural complex food groups did not show improvement, but the 100% natural complex food did showed significant changes (p<0.05). The amount of blood serum triglyceride decreased as the amount of natural complex food was increased. In order to investigate the appearances of the accumulated fat in the liver, the animals were dissected. Livers of the control group (no natural complex food) were appeared as a white color, which means serious fat accumulation. However, all the natural complex food groups (30,50 and 100% natural complex food) showed noticeable decrease of fat content. Even the histology showed that livers of the control group had expansion of the fat, but a11 the natural complex food groups had e decreased as the contents and continued to show destroyed fatty cells. By observing the biological numeric data, the physical appearance and the history of the fatty liver, it is highly expected that natural complex food is very effective in treating the liver damaged -by the to fat and the cholesterol.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.43-71
• /
• 1999

This research is an experimental work of developing a construction material using municipal wastewater sludge as liner and cover materials for waste disposal landfill. Weathered granite soil and flyash, produced as a by-product in the power plant, were used as the primary additives to improve geotechnical engineering properties of sludge. For secondary additives, bentonite and cement were mixed with sludge to decrease the permeability and to increase the shear strength, respectively. Various laboratory test required to evaluate the design criteria for liner and cover materials, were carried out by changing the mixing ratio of sludge with the additives. Basic soil properties such as specific gravity, grain size distribution, liquid and plastic limits were measured to analyze their effects on permeability, compaction, compressibility and shear strength properties of mixtures. Laboratory compaction tests were conducted to find the maximum dry densities and the optimum moisture contents of mixtures, and their effectiveness of compaction in field was consequently evaluated. Permeability tests of variable heads with compacted samples, and the stress-controlled consolidation tests with measuring permeabilities of samples during consolidation process were performed to obtain permeability, and to find the compressibility as well as consolidational coefficients of mixtures, respectively. To evaluate the long term stability of sludges, creep tests were also conducted in parallel with permeability tests of variable heads. On the other hand, for the compacted sludge decomposed for a month, permeability tests were carried out to investigate the effect of decomposition of organic matters in sludges on its permeability. Direct shear tests were performed to evaluate the shear strength parameters of mixed sludge with weathered granite, flyash and bentonite. For the mixture of sludge with cement, unconfined compression tests were carried out to find their strength with varying mixing ratio and curing time. On the other hand, CBR tests for compacted specimen were also conducted to evaluate the trafficability of mixtures. Various test results with mixtures were assessed to evaluate whether their properties meet the requirements as liner and cover materials in waste disposal landfill.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.1-19
• /
• 2010

In offline environment, unlike traditional advertising model through TV, newspaper, and radio, online advertising model draws instantaneous responses from potential consumers and it is convenient to assess. This kind of characteristics of Internet advertising model has driven the growth of advertising model among various Internet business models. There are, conventionally classified, CPM (Cost Per Mile), CPC (Cost Per Click), and CPS (Cost Per Sales) models as Internet advertising expenditure model. These can be examined in manners regarding risks that stakeholders should stand and degree of responsibility. CPM model that is based on number of advertisement exposure is mechanically exposed to users but not actually recognized by users resulting in risk of wasted expenditure by advertisers without any advertising effect. While on aspect of media, CPS model that is based on conversion action is the most risky model because of the conversion action such as product purchase is determined by capability of advertisers not that of media. In this regard, while there are issue of CPM and CPS models disadvantageously affecting only one side of Internet advertising business model value network, CPC model has been evaluated as reasonable both to advertisers and media, and occupied the largest segment of Internet advertising market. However, CPC model also can cause fraudulent behavior such as click fraud because of the competition or dishonest amount of advertising expenditure. On the user aspect, unintentionally accessed advertisements can lead to more inappropriate expenditure from advertisers. In this paper, we suggest "CPCD"(Cost Per Coupon Download) model. This goes beyond simple clicking of advertisements and advertising expenditure is exerted when users download a coupon from advertisers, which is a concept in between CPC and CPS models. To achieve the purpose, we describe the scenario of advertiser perspective, processes, participants and their benefits of CPCD model. Especially, we suggest the new value in online coupon; "possibility of storage" and "complement for delivery to the target group". We also analyze the working condition for advertiser by a comparison of CPC and CPCD models through advertising expenditure simulation. The result of simulation implies that the CPCD model suits more properly to advertisers with medium-low price products rather than that of high priced goods. This denotes that since most of advertisers in CPC model are dealing with medium-low priced products, the result is very interesting. At last, we contemplate applicability of CPCD model in ubiquitous environment.