Over the past few years, companies have started moving into specific niches in plus-size fashion. The purpose of this study was to verify the marketability of young plus-size clothes in the USA. Data were collected from female consumers aged from 20 to 39 who have experience of purchasing plus-size items. A total of 282 responses were used for statistical analysis. The research result is as follows. First, the obesity stress is affected more by the subjective obesity level than by the objective obesity level and by how people recognize their body types. Second, from an analysis of the factors affecting the shopping orientation of plus-size consumers, style consciousness, pursuing reasonable, emphasizing comfort, and body consciousness are found to be important factors. Third, even if responders are aware of their exact body size, they actively look for the correct size. Fourth, fit evaluation of plus-size products is based on the factors of size fit and movement fit. The respondents were unsatisfied with chest and arm measurements, which deviate widely by body type for tops. Fifth, the overall dissatisfaction with the plus-size market is attributed to the fact that the product assortment range from which to select styles is narrow, and trend reflection is low. Sixth, the respondents tended to avoid fabrics that make their body type more obvious, textures that give the impression of a larger body size, or stiff textures. These results show that the psychological and physical characteristics of obese consumers should be considered to develop products for the young plus-size market.
A quantitative risk assessment tool was used to provide estimates of the probability that foot-and-mouth (FMD) virus-contaminated, smuggled animal products are fed to susceptible swine in Korea. Sensitivity analyses were conducted to attempt to distinguish between parameter uncertainty and variability, using different assumptions on the effect of cooking at home, the effect of the fresh meat, and the effect of heat treatment at garbage processing facility. The median risk estimate was about 20.1% with a mean value of 27.4%. In a scenario regarding all beef and pork were considered as fresh meat the estimated median risk was 3.4%. The risk was greatly dependent on the survival parameters of the FMD virus during the cooking or heat treatment at garbage processing facility. Uncertainty about the proportion of garbage that is likely contaminated with FMD had a major positive influence on the risk, whereas conversion rate representing the size of a load had a major negative effect. This model was very useful in assessing the risk explored. However, the model also requires enhancements, such as the availability of more accurate data to verify the various assumptions considered such as FMD prevalence in a specific country, proportion of garbage which is recycled as feed, proportion of food discarded as garbage. Other factors including the effect of selection of animals for slaughter, ante- and post-mortem inspection, the domestic distribution of the smuggled products, and susceptible animals other than pigs, are need to be taken into account in the future model development.
New biological treatments were being developed at a record place, but their potential could be compromised by a significant obstacle: the delivery of these drugs into a body. Pharmaceutical delivery is now nearly as important as product. New systems are being developed, and Drug Delivery Markets Series cover these new systems. Transdermal Delivery System(TDS) is often used as a method of drug dosage into the epidermic skin. An approach used to delivery drugs through the skin for therapeutic use as an alternative to oral, intravascular, subcutaneous and transmucosal routes. Various transdermal drug delivery technologies are described including the use of suitable formulations, carriers and penetration enhancers. The most commonly used transdermal system is the skin patch using various types of technologies. Compared with other methods of dosage, it is possible to use for a long term. It is also possible to stop the drug dosage are stopped if the drug dosage lead to side effect. Polysaccharides, such as karaya gum and glucomannan, were selected as base materials of TDS. Also, these polymers were characterized in terms of enhancers, drug contents. Among these polysaccharide, the permeation rate of karaya gum matrix was fastest in fibric acid(ciprofibrate) such as lipophilic drug in vitro. We used glycerin, PEG400 and PEG800 as enhancers. Since dermis has more water content(hydration) than the stratum corneum, skin permeation rate at steady state was highly influenced when PEG400 was more effective for lipophilic drug. Proper selection of the polymeric materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate. Especially, this result suggests a possible use of polysaccharide gel ointment matrix as a transdermal delivery system of anti-hyperlipoproteinemic agent.
한국식품영양과학회 2001년도 International Symposium on Food,Nutrition and Health for 21st Century
/
pp.52-60
/
2001
Purpose: We performed a randomized, double-blind, placebo-controlled trial in mild to moderate myopia patients to evaluate the benefit of taking a nutrient supplement containing anthocyanoside oligomers for improving nocturnal visiual function and/or clinical symptoms. Methods: The subjects included have refractive error between -lD(Diopters) $\~$-8D in both eyes, symptoms of decreased night vision and asthenopia based on the scoring result of a pre-structured questionnaire, and abnormal results of mesopic contrast sensitivity(MCS) screening test showing abnormal curve of contrast sensitivity in the middle and high frequency level, between 6.0 and 30.0 CPD(Cycles per degree) at mesopic condition(-2$\~$0 log cd/$m^2$). Total 60 people who qualified the criteria above were enrolled and the subjects were instructed to take the investigational product (anthocyanoside or placebo) twice daily for a 4 week period. The enrolled subjects were investigated for nocturnal vision performance by MCS and clinical symptoms at their first visit and re-evaluated at post-intervention (4 weeks later). MCS was measured and improvement of contrast threshold level according to each CPD was calculated by subtracting initial values from final values. Age, refractive error, and MCS were compared between the placebo and anthocyanoside. Results: After 4 weeks of drug administration 22 of the anthocyanoside group showed symptom improvement compared to 1 of the placebo group (p=0.000). Contrast sensitivity levels according to each CPD before and after drug treatment showed significant improvement in the anthocyanoside group but not in the placebo group. Mean MCS change of anthocyanoside group is 2.41$\pm$1.91 which showed significant improvement compared to -0.40$\pm$2.47 of the placebo group(p=0.000). MCS changes of anthocyanoside group showed significant improvement compared to placebo group in all levels of CPD(p<0.05). During our investigation none of the subjects complained of specific side effects related to anthocyanoside use. Conclusion: Our results show that under careful selection of people with significant symptoms and definite MCS abnormalities, anthocyanoside oligomers may improve the subjective symptoms and objective MCS results.
지구상의 잠재삼림면적을 추정하기 위한 일련의 단계로서, 적정한 식생도제작(Global Natural Vegetation Mapping, GNVM) 시스템을 선발하기 위해, Light Climatic Dataset(LCD)에 지형을 고려하지 않은 단순 시스템, LCD에 지형을 고려한 시스템, Heavy Climatic Dataset(HCD)에 지형을 고려한 시스템을 구축하고 상호 비교하였다. 3종류의 GNVM시스템은, 세계에서 관찰된 기후데이타를 구면보간법에 의해 지구면 전체의 $1^{\circ}{\times}1^{\circ}$의 격자점에 대하여 이것을 추정하고, 그 추정치로부터 식생을 구분하며, 구분의 결과를 가지고 잠재자연식생도의 출력 및 잠재자연식생의 면적을 산출한다. 3종류의 GNVM시스템을 비교한 결과, LCD에 지형을 고려한 GNVM 시스템이 잠재자연식생의 분포를 가장 잘 표현하였으며, 단순 시스템은 지형을 고려한 시스템들에 비해 온난한 지역을 과대평가하고 한랭지 및 사막지역을 과소평가하는 경향을 나타냈다. 한편, 측후소의 수에 따른 시스템간에 있어서는 HCD에 지형을 고려한 시스템이 측후소의 과밀분포로 인해 LCD에 지형을 고려한 시스템보다 습윤지역의 과대평가와 건조지역의 과소평가를 나타냈다.
Background: Ginseng (Panax ginseng Meyer) is an important medicinal herbs in Asia. However, ginseng varieties are less developed. Method: To developed ginseng varieties, a pure line selection method was applied in this study. Results: Gumpoong was testing of 4-yr-old specimens in 2002, the proportions of the below-ground roots that were rusty colored for Gumpoong was 1.29 in Daejeon and 1.45 in Eumseong, whereas the proportions for its yellow berry variant were 2.60 and 2.45 in the two regions, respectively. Thus the Gumpoong was resistant to root rust. Sunpoong has a high yielding property. Its average root weight is 70.6 g for 6-yr-old roots. Its yield is 2.9 kg/$1.62m^2$ and the rate of heaven- and earth-grade product is 20.9%, which is very high compared to 9.4% for Yunpoong. Sunone is resistance to root rot and the survival rate of 4-yr-old roots was 44.4% in 1997, whereas that of the violet-stem variant landrace was 21.7%. Sunhyang has content of arginyl-fructosyl-glucose (AFG), which produces the unique scent of red ginseng, is $95.1{\mu}mol/g$ and greater than the $30.8{\mu}mol/g$ of Chunpoong in 6-yr-old plants. Sunun and Cheongsun are being nurtured to protect genetic resources. Conclusion: Developed ginsneg varieties will be used as the basis for the protection of genetic resources and breeding.
본 연구는 급진적인 환경면화를 대표하는 정보산업에서의 기술혁신의 진화과정을 탐색하였다. 진화론경제학이론을 바탕으로하는 동태적인 기술변화과정과 조직생태학이론으로부터의 산업-특정조직유형간의 관계를 결합하는 통합적인 모델을 개발하였다. 진화론경제학이론의 관점에 기초하여, 시감이 감에 따라 선택압력에 의해 미래기술의 지표로서 역할을 하는 소위 '기본설계'가 등장하고 그 기본설계는 일관성 있는 경로를 따르는 경향이 있으며, 그 기술이 한계점에 도달하기 전까지 기술경계들의 급진적 팽창을 촉진시키지만, 한계점에 도달했을 때 새로운 기술패러다임을 탐색한다는 것을 분석하였다. 아울러 조직군생태학 관점으로부터 5개 조직유형을 구분하였으며, 각 조직유형들은 산업내 기술변화의 진화과정에 따라 서로 다른 기회를 탐색한다는 것을 살펴보았다. 진화론경제학이론과 조직군생태학이론은 오랜 학문적 역사를 가진 생물학에 바탕을 두고 있으며 기존 전략 조직이론들이 설명하지 못했던 기술적 변화 또는 실패와 같은 전략적 사건들에 대한 인과관계를 설명하는데 깊은 통찰력을 제공해 준다. 따라서 향후 두 이론에 바탕을 둔 좀더 정교하고 통합적인 이론연구와 실증연구들이 지속될 필요가 있음을 말해준다.
As film products are increasingly used in a wide range of areas, from producing traditional flexible packaging to high-tech electronic products, a higher level of quality is demanded. Most film products are made in the form of rolled finished goods, therefore, various quality issues related to their shape characteristics must be addressed. The thickness of the film products is one of the most common and important critical-to-quality attributes (CTQs). Particularly, the degree of thickness uniformity is more important than other thickness parameters, because it will be potential causes of many secondary thickness-related quality problems, such as wrinkles or faulty windings. To control the degree of thickness uniformity, the fixed bending region is oneof the most important CTQs to manage. Fixed bending regions are special points in the transverse direction of a rolled product with consistent minute variations of the thickness gap. This paper describes the measurement and analysis of thickness uniformity data, which were performed in a real manufacturing field of biaxial oriented polypropylene (BOPP) film. In previous researches, quality function deployment (QFD) or fault tree analysis were used to find the most critical process attributes out to controlthe CTQ of thickness uniformity. Whereas, this paper uses traditional control charts to find the most critical process attributes out in this problem. In addition, the selection of one of the major critical process attributes (CTPs) that is expected to affect the CTQ of thickness uniformity is also described. The selected critical-to-process attributes are the controlled temperatures along the transverse direction. A dramatic improvement in thickness uniformity was observed when the selected CTPs were controlled.
Aggregate Production Planning determines levels of production, human resources, inventory to maximize company's profits and fulfill customer's demands based on demand forecasts. Since performance of aggregate production planning heavily depends on accuracy of given forecasting demands, choosing an accurate forecasting method should be antecedent for achieving a good aggregate production planning. Generally, typical forecasting error metrics such as MSE (Mean Squared Error), MAD (Mean Absolute Deviation), MAPE (Mean Absolute Percentage Error), and CFE (Cumulated Forecast Error) are utilized to choose a proper forecasting method for an aggregate production planning. However, these metrics are designed only to measure a difference between real and forecast demands and they are not able to consider any results such as increasing cost or decreasing profit caused by forecasting error. Consequently, the traditional metrics fail to give enough explanation to select a good forecasting method in aggregate production planning. To overcome this limitation of typical metrics for forecasting method this study suggests a new metric, WACFE (Weighted Absolute and Cumulative Forecast Error), to evaluate forecasting methods. Basically, the WACFE is designed to consider not only forecasting errors but also costs which the errors might cause in for Aggregate Production Planning. The WACFE is a product sum of cumulative forecasting error and weight factors for backorder and inventory costs. We demonstrate the effectiveness of the proposed metric by conducting intensive experiments with demand data sets from M3-competition. Finally, we showed that the WACFE provides a higher correlation with the total cost than other metrics and, consequently, is a better performance in selection of forecasting methods for aggregate production planning.
모바일 기기란 터치 입력을 가진 표시 화면과 소형 자판을 가진 작은 크기기의 컴퓨팅 장치로 이동성과 편리함을 갖추고 인터넷 접속이 가능한 기기로 정의된다. 모바일 기기는 혁신 제품이므로 소비자들은 기술수용 문제와 구매를 위한 의사결정 문제에 직면하게 된다. 본 연구에서는 모바일 기기 구매 의사결정 지원방법의 하나로 계층적분석과정 방법을 제안한다. 6개 주기준과 15개의 세부기준으로 구성된 계층적 모델을 제안하고, 다수의 의사결정자가 참여할 때 평가기준의 중요도와 4개의 모바일 기기(넷북, 테블릿 PC, 카메라폰, 스마트폰)의 우선순위를 도출하는 방법을 제안하였다. 평가기준 중 휴대성이 가장 중요도가 높은 것으로 나타났다. 평가 대안 중 스마트폰의 우선순위가 가장 높았지만 전반적으로 모바일 기기 간 선호도는 차이가 없었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.