• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.305-308
• /
• 2002

Decursinol angelate, a new anticancer agent, was produced by root cultures of Angelica gigas Nakai. In addition, difference of specific yields between primary and secondary root was investigated. It was found that specific yield of secondary root was much higher than that of primary root at various conditions, so that it was thought that the formation and growth of secondary root were feasible. From this point of view, effects of root segmentation and plant growth regulators (NAA, IBA) on root morphology and decursinol angelate production were examined. Root segmentation increased secondary root mass and product formation. On the other hand, addition of NAA or IBA at various concentrations promoted secondary root formation and production of decursinol angelate significantly. Five-fold increase of production was obtained at 4 mg/L of IBA compared to control without NAA and IBA.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.126-130
• /
• 2021

The ball grid array is one of the packaging methods that used in high density printed circuit board. Solder void defects caused by voids in the solder ball during the BGA process do not directly affect the reliability of the product, but it may accelerate the aging of the device on the PCB layer or interface surface depending on its size or location. Void inspection is important because it is related in yields with products. The most important process in the optical inspection of solder void is the segmentation process of solder and void. However, there are several segmentation algorithms for the vision inspection, it is impossible to inspect all of images ideally. When X-Ray images with poor contrast and high level of noise become difficult to perform image processing for vision inspection in terms of software programming. This paper suggests the solution to deal with the suggested problem by means of using Mask R-CNN instead of digital image processing algorithm. Mask R-CNN model can be trained with images pre-processed to increase contrast or alleviate noises. With this process, it provides more efficient system about complex object segmentation than conventional system.

• The Journal of Information Systems
• /
• v.32 no.4
• /
• pp.149-162
• /
• 2023

Purpose In the textile industry, fabric defects significantly impact product quality and consumer satisfaction. This research seeks to enhance defect detection by developing a transformer-based deep learning image segmentation model for learning high-dimensional image features, overcoming the limitations of traditional image classification methods. Design/methodology/approach This study utilizes the ZJU-Leaper dataset to develop a model for detecting defects in fabrics. The ZJU-Leaper dataset includes defects such as presses, stains, warps, and scratches across various fabric patterns. The dataset was built using the defect labeling and image files from ZJU-Leaper, and experiments were conducted with deep learning image segmentation models including Deeplabv3, SegformerB0, SegformerB1, and Dinov2. Findings The experimental results of this study indicate that the SegformerB1 model achieved the highest performance with an mIOU of 83.61% and a Pixel F1 Score of 81.84%. The SegformerB1 model excelled in sensitivity for detecting fabric defect areas compared to other models. Detailed analysis of its inferences showed accurate predictions of diverse defects, such as stains and fine scratches, within intricated fabric designs.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.17-25
• /
• 2000

• Journal of Technology Innovation
• /
• v.14 no.1
• /
• pp.1-30
• /
• 2006

The purpose of this paper is to analyze the organizational design and management of product development in creating new product architecture by an established firm. For the purpose, the paper put up the organizational design in the process of PDA(Personal Digital Assistant) development of Sharp and Casio which were Japanese major PDA firms in 1990s. PDA is the product born through architectural change from Electronic Organizer. Prior research on the product architecture change and organizational adaptation emphasized that an established firm is difficult to adapt to new product architecture due to the restriction of prior technology or organizational inertia. For overcoming these problems and successful development of new product architecture, organizational design and management in the process of product development becomes essential. In case of Sharp, corporate development project team had been used to overcome the restrictions from architectural knowledge accumulated through previous product. After launching first new PDA by corporate development project team, Sharp created a new division and pushed an evolution of PDA, when new PDA market start to grow up rapidly toward a major market segmentation. As a result, Sharp was able to build up stable PDA project trajectory. However, Casio was late for three years in launching of new PDA architecture because previous division charging of Electronic Organizer tried to develop first new PDA. Casio's PDA development was prohibited by engineers of previous division because new PDA architecture was inferior on user interface and display definition. That is, Casio's first PDA development was restricted by architectural knowledge of previous product.

• Proceedings of the Technology Innovation Conference
• /
• 2005.06a
• /
• pp.44-68
• /
• 2005

The purpose of this paper is to analyze the organizational design and management of product development in creating new product architecture by an established firm. For the purpose, the paper put up the organizational design in the process of PDA(Personal Digital Assistant) development of Sharp and Casio which were Japanese major PDA firms in 1990s. PDA is the product born through architectural change from Electronic Organizer. Prior research on the product architecture change and organizational adaptation emphasized that an established firm is difficult to adapt to new product architecture due to the restriction of prior technology or organizational inertia. For overcoming these problems and successful development of new product architecture, organizational design and management in the process of product development becomes essential. In case of Sharp, corporate development project team had been used to overcome the restrictions from architectural knowledge accumulated through previous product. After launching first new PDA by corporate development project team, Sharp created a new division and pushed an evolution of PDA, when new PDA market start to grow up rapidly toward a major market segmentation. As a result, Sharp was able to build up stable PDA project trajectory. However, Casio was late for three years in launching of new PDA architecture because previous division charging of Electronic Organizer tried to develop first new PDA. Casio's PDA development was prohibited by engineers of previous division because new PDA architecture was inferior on user interface and display definition. That is, Casio's first PDA development was restricted by architectural knowledge of previous product.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2005.05a
• /
• pp.280-281
• /
• 2005

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.2
• /
• pp.117-128
• /
• 2017

This study confirmed the types of shopping information sources during travel abroad, and developed a profile of tourists in terms of demographics, travel, and shopping behavior. Shopping information sources and characteristics of shopping products were identified first. Thereafter, travelers were segmented by their information-seeking behavior. An online survey method was used to get data from Korean vacationers in their 20s-50s, while factor analysis, cluster analysis, ${\chi}^2$ test and ANOVA were applied to analyze data. The results were as follows. First, the shopping information sources of overseas tourists were composed of four factors including sources from travel agents/media, information from travel books and local sources, and word-of-mouth sources. Also, four factors in product types and four product attributes were identified. Second, tourists were clustered into two groups, active and passive shopping information seekers, based on shopping source behavior. Third, two groups differed in terms of demographics, showing an older age and higher income for active shopping source seekers. Active shopping information users tended to join package trips with family members, and they were more satisfied with the trip. With regard to shopping, active shopping source seekers spent more money for shopping and preferred all kinds of shopping goods with an emphasis on travel shopping. In conclusion, shopping information sources seemed to be a meaningful tool for segmenting tourists. Rich, older, family tourists would be an major target market for local retailers.

• Science of Emotion and Sensibility
• /
• v.9 no.spc3
• /
• pp.225-234
• /
• 2006

Car Navigation market is rapidly emerging in Korea recently. And it adds the multiple functions which are various traffic and travel information, DMB(Digital Multimedia Broadcasting) TV, game, movie and music. It is evolving as a killer application device of Car Infotainment (Information & Entertainment). On the other hand, the technical barrier which is pushing into the market is low and the competition is intense in process of time. In the market situation, the design differentiation is embossed with important element. In this case study, focused on inkel which specialized in Audio/Video launching into the Car Navigation market with the new brand 'WideTouch', we tried to provide successful product design strategy based on proactive research on the market for the design differentiation through the target segmentation of the new generation, middle-aged and a woman consumer.

• Korean Business Review
• /
• v.6
• /
• pp.135-152
• /
• 1993

The optional market segmentation pricing policy for rooms of hotels are investigated under the assumption of a linear demand function, and for four different situations: (1) single price market, (2) optimal segmentation of the unused capacity of a single-price-maeket, (3) optimal segmantation for all rooms, and (4) opimal segmentation for infiltration from higher priced to adjacent lower priced segments. The purpose of tis study is th show that with proper pricing policy, it would be possible to increase profits considerably. Such a profit increase might be achived by market segmentation coupled with product differentiation, where the different market segments are identified, sperated, and in each segment a different price per room is called for. The different prices are determined based on the specific price elasticity typical for each market segment and the relavant costs. The pricing model implied in this study is based on basic economic pricing theory and optimization techniques. While somewhat complex in its mathmatical solution, it can be easily programmed for use by practitioners, avoiding the need to cope with the technical aspects of the solution. In section II-1, the optimal single-market Single-price policy is evaluated. The optimal strategy under the constraint that only the previously unutilized rooms are segmented is analysed in section II-2, while the optimal strategy without this constraint is determined in section II-3. In section II-4, the optimal market-segmentation pricing policy is derived for the case in which market seperation is allowed for all the rooms under the assumption of custtomer infiltration from each market segment to the adjacent lower priced segment Finally, some considerations relating to the practicality of the model as a decision support tool and the requirements for its implementation are discussed in section III.