• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.902-905
• /
• 2000

As the manufacturing processes of automotive engine piston, gravity die-casting, squeeze casting, hot forging and powder forging process are generally used for the various specifications. As the semi-solid forming(SSF) is compared with conventional casting such as gravity die-casting and squeeze casting for the characteristics of its process, the product without inner defects such as gas porosity and segregation can be obtained and its microstructure is globular grain. In SSF process, the materials are heated up to the temperature between the solvus and liquidus line at which the materials exists in the form of liquid-solid mixture. In this time, Discussion is given about reheating process of row material and results are presented regarding accurate temperature and process variables controlling for right solid fractions.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.3-9
• /
• 1999

The recent technical trend in hot rolling of steel can be described as process and product technologies which have been progressed with modern mill equipment and computers. Precise gauge and width control can be achieved by up-to-date control methods such as AGC and AWC systems. Roll benders and various shape control systems enabled high quality flatness and crown control. Mills can produce higher tensile materials by new process based on process metallurgy. The use of high speed steel rolls and on line roll grinders make the schedule free rolling easier which results in cost saving. Process itself goes toward continuous and simple flow type which has lower operation. Endless rolling and strip casting are examples of the trend. Materials with higher tensile strength and various functions have been developed in last years to meet the customer's needs and this trend will continue.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.223-230
• /
• 2001

Nine different types of the reinforced railroad roadbeds which . are located in between Suwon-Chunan station of Kyongbu line were constructed in order to increase the bearing capacity of railroad roadbed and to improve the ridability as a part of speed-up project of conventional railroad systems. Each three sections were composed of weathered granite soil, crushed stone and furnace slag(HMS25), and fully instrumented with earth pressure cells, settlement plates and geophones to monitor the behavior of roadbeds under actual train loads. Field measurement has continued since October 31, 2000 and presently with rather longer measurement interval. The measurement data such as settlement, earth pressure and vibration levels are currently under analysis process. In this paper, only cumulative measurement data of railroad roadbeds were introduced. In the near future, comprehensive measurement data and result of analysis will be presented and design technique for the reinforced railroad roadbed will be proposed as a final product of this study.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.526-529
• /
• 2007

Due to its inherent feature of high-resolution satellite, there is strong need in some specific area to minimize the processing time required to get a standard image on hand from downlink signal acquisition. However, in general image processing system, it takes considerable time to get image data up to certain level from raw data acquisition because the huge amount of data is dealt sequentially as input data. This paper introduces the high-speed image processing system which generates the image data only for the area selected by user. To achieve the high speed performance, this system includes Quick Look Image display function with sampling, ROI selection function, Image Line Index function, and Distributed processing function. The developed RPS was applied to KOMPSAT-2 320Mbps downlink channel and its effectiveness was successfully demonstrated. This feature to provide the image product very quickly is expected to promote the application of high resolution satellite image.

• 한국IT서비스학회지
• /
• 제11권1호
• /
• pp.197-210
• /
• 2012

This paper presents the ways that can improve the Software Cost Estimation Guidelines in order to replace those that are expected to be abolished at February, 2012, and solve the problems that are being occurred in the current Software Cost Estimation Guidelines. By using multidimensional modeling of OLAP(On-Line Analytical Processing), this paper does three dimensional modeling that considers the product/service view, process view and skill view. Also, it presents the identification method of cost estimation data through the view of each dimension. Furthermore, it defines the software cost estimation process and adapts them into the bottom up estimation and the top down estimation. Finally, it proposes the access of cost estimation data by the multidimensional analysis of OLAP.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.23-27
• /
• 2008

Recently, regulation for THD (Total Harmonic Distortion) such as IEC 61000-3-2, IEEE 519 is being reinforced about a product which directly connects to AC line in order to prevent distortion of common power source in electronic equipment and electrical machinery. In order to satisfy these regulations, conventional circuits were used two-stage structure attached power factor correction circuit at ahead of converter but this method complicate the circuit and then a number of element increases thereupon the cost of production rises. in this paper, we propose a high efficiency single-stage 300W PFC fly-back converter that improved power factor and efficiency than conventional two-stage power module.

• 정보교육학회논문지
• /
• 제9권2호
• /
• pp.221-228
• /
• 2005

다양한 영상매체의 홍수 속에서 주체적인 사고와 올바른 가치 판단력을 기르기 위한 미술 감상 교육의 중요성이 어느 때 보다 강조되고 있고, 미술과 제7차 교육과정에서도 감상 영역과 연계하여 미적 체험, 표현 영역을 지도하도록 강조하고 있으나, 교육현장에서는 여전히 표현과 기능 위주의 미술 교육만이 실시되고 있다. 표현 활동을 마친 후 실시하고 있는 감상활동도 시간의 부족, 작품 분석에 대한 어려움, 감상지도의 어려움으로 단순히 직관에 의한 느낌을 간단히 서술하는데 그치고 있다. 따라서, 본 논문에서는 미술 작품의 조형요소를 분석하고, 응용 프로그램을 이용해 조형요소별로 작품을 수정해 보고 이를 비교 분석하여 분석감상능력을 신장시킬 수 있는 웹 기반 미술감상 시스템을 개발하였다. 이를 교육현장에 적용하여 작품에서 보여지는 가시적인 조형요소인 선 형 명암 색채 질감 공간 구도를 분석함으로써 학생들의 조형감각과 분석감상능력이 신장됨을 확인할 수 있었다.

• 유통과학연구
• /
• 제16권7호
• /
• pp.57-65
• /
• 2018

Purpose - Recently, internet access and social network utilization using smart phone are increasing. In such a smart environment, interactive activities such as information generation, information searching and information sending are increasing rapidly on-line environment. Therefore, consumers tend to purchase something according to eWOM and also meet the social consensus online environment. In connectivity society, consumers became accessible and engaged in the opinions of others easily. Many decisions that seem like personal decisions are actually social decisions on online connectivity. This paper seeks to explore factors that can help generate a social decision on purchasing of new products in an online environment. Research design, data, and methodology - The process of collecting a lot of wisdom and making an agreement online is called social decision. The purpose of this paper is to examine empirically the influence of factors such as online ties, online eWOM expectancy and online information behavior on online social decision. In addition, We studied online social decision by analyzing the moderating effect of new product innovation. To understand this structural relationship, research hypotheses and research models were set up and empirical analysis was conducted. In order to verify the hypothesis, 208 questionnaires were collected from the residents of Seoul city/Gyeonggi province. The answered questionnaire verifies reliability and validity using SPSS/AMOS and test hypotheses through path analysis and multiple regression analysis. Results - According to the research results, First, online ties don't have a positive impact on online social decision, Second, online eWOM expectancy have a positive impact on online social decision. Third, online information behaviors have a positive impact on online social decision. The degree of innovation of new products have a moderating effect between Independent variables of three factors and dependent variable of social decision. Conclusions - Social decisions have a positive impact on purchasing decisions about new product. There is a great significance in the fact that the online social influence and online social decision have been studied academically. It is meaningful that we have studied in depth the changing phenomenon of consumer purchase decision process in smart environment. The results of these studies provide academic and practical implications.

• 통상정보연구
• /
• 제19권1호
• /
• pp.99-126
• /
• 2017

인도네시아는 지속적인 경제성장, 중산층 성장, 인터넷(SNS포함) 사용자 증가, 모바일 브로드밴드 서비스 접근성 확대 등으로 전자상거래 시장이 크게 발전하고 있다. 특히, 스마트폰 기기의 보급 확대로 모바일과 SNS를 통한 소비자들의 온라인 쇼핑이 급증하고 있다. 본 연구는 인도네시아 전자상거래 시장특징, 문제점, 진출사례 및 시사점 등을 상세하게 분석하여 전자상거래 플랫폼을 통한 한국 중소기업의 인도네시아 수출확대방안을 제시했다. 본 연구는 국내외 연구기관, 무역지원기관, 현지 진출 전자상거래업체 등으로부터 입수한 자료를 심층 분석하여 전략을 도출하였다. 인도네시아에 대한 수출확대를 위해서는 오프라인 시장을 직접 공략하기 보다는 기 구축된 온라인 플랫폼을 통해 간접 진출하는 것이 효과적일 수 있다. 현지 소비자들의 기호를 충족시키고 독창적인 제품을 개발하여 온라인 플랫폼에 입점한다면 효과적으로 시장을 공략할 수 있다. 인도네시아 전자상거래 플랫폼을 활용한 수출확대방안으로는 현지 온라인 판매유통망 구축, 물류배송 및 결제시스템 구축, 무슬림시장 공략을 위한 할랄 인증 취득, 철저한 시장조사를 통한 현지화 시장진출전략 수립, 한류 마케팅전략의 적극적 실행, 제품차별화 및 시장세분화 전략 수립, SNS 모바일 마케팅 전개 등이다.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.233-243
• /
• 2014

The difference of mooring tension by type of buoy was investigated in the circulating water channel and the wave tank for deducting the most stable buoy from the current and the wave condition. 5 types of buoy made up of short cylinder laid vertically (CL-V), short cylinder laid horizontally (CL-H), capsule (CS), sphere (SP) and long cylinder (CL-L) were used for experiments. A mooring line and a weight were connected with each buoy. A tensile gauge was installed between a mooring line and a weight. All buoy's mooring tension was measured at the same time for the wave test with periods of 1.5~3.0 sec and wave heights of 0.1~0.3 m, and the current test with flow speeds of 0.2~1.0 m/sec. As a result, the order of tension value in the wave test was CL-H > CL-V > SP > CS > CL-L. In the current test CL-V and CL-H were recorded in the largest tension value, whereas SP has the smallest tension value. So it seems that SP buoy is the most effective in the location affected by fast current. CS is predicted to be suitable for a location that influence of wave is important more than that of current if practical use in the field is considered. And it was found that the difference of mooring tension among buoys in wave is related to the product of the cross sectional area and the drag coefficient for the buoy's bottom side in high wave height. The factor for the current condition was not found. But it was supposed to be related to complex factors like a dimension and a shape by buoy's posture to flow.