• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.2
• /
• pp.243-249
• /
• 2001

Thirty six barrows with an initial body weight of 28 kg were used to determine the effect of two dietary Se sources and a wide range of Se levels encompassing 0.3, 1.0, 3.0, 5.0, 7.0, and 10.0 mg/kg Se. The organic Se form was a Se-enriched yeast product, whereas the inorganic Se source was sodium selenite. The experiment was a $2{\times}6$ RCB design conducted in three replicates. Each barrow was placed in an individual metabolism crate and provided their dietary treatment and water on an ad libitum basis for a minimum 2 wk period, whereupon feed intake was adjusted to a constant intake within replicate at approximately 90% of intake for a 4 d adjustment period. Urine and feces were subsequently collected for a 7 d period and analyzed for Se and minerals. The results demonstrated that urinary Se was approximately 25% higher when pigs were fed sodium selenite (p<0.01), whereas fecal Se was lower by 25% (p<0.01). Se retention tended to be higher when organic Se was provided (p>0.15). Urinary Se increased as dietary Se level increased for both Se sources but increased more and at a high rate when sodium selenite was fed resulting in an interaction response (p<0.01). Fecal Se increased linearly as the dietary level of both Se sources increased, but the fecal Se from organic Se increased at a faster rate resulting in an interaction response (p<0.01). Se retention increased linearly (p<0.01) as dietary Se increased for both Se sources. The apparent digestibility of Se increased by Se level when pigs were fed sodium selenite, but not when the organic Se source was provided resulting in an interaction response (p<0.05). Retention of consumed Ca, Zn increased when pigs were fed organic Se (p<0.05) whereas P and Na retention were higher when the inorganic Se was provided. Mineral retention was not affected by dietary Se level except P. These results suggest that Se excretion by urine was the main route of excretion when pigs were fed sodium selenite but the fecal route when Se-enriched yeast was provided. The excretion of Fe, Zn, Mn, and Cu via urine and feces was not affected by high dietary Se level or dietary Se sources.

• Science of Emotion and Sensibility
• /
• v.10 no.2
• /
• pp.177-186
• /
• 2007

The purposes of this study were to investigate consumer's needs for golf wear and to suggest a direction of product development and planning, based on the analysis of golfer's needs. The subjects used for the research were 150 male and female golfers who were in golf practice fields. The data were analyzed by frequency analysis, factor analysis, ANOVA, t-test and Duncan test. In summary, the results of this study were as followers; Dimensions of consumer's needs for golf wear were extracted from factor analysis as following properties; fashion/design property, textile property, hygiene property, body-shaped property. The most important consumer's need for golf wear was "wearing comfort" and second one was "moisture absorbency" Respondents evaluated that wearing comfort, stretchability, tactile, size of golf wear were very important but price, pilling, shrinkage or color-fading after laundry of golf wear were relatively less important. The evaluation of consumer's needs for golf wear according to demographic information had significant difference. The female golfers were found to consider that fiber characteristics, easy-to-laundry, wrinkle resistance, stretchability, sewing quality were relatively more important, when compared with the male golfers. Also, There were significant differences on the evaluation of consumer's needs for golf wear on fiber characteristics, stretchability, brand name between age groups.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.107-116
• /
• 2018

One of the key mission is to develop and prompte the use National Competency Standards, which is defined to be the systemization of competencies(knowledge, skills and attitudes) required to perform duties at the workplace by the nation for each industrial sector and level. This provides the basis for the design of training and detailed specifications for workplace assessment. To promote the data-driven service improvement, the commercial product Splunk was introduced, and has grown to become an extremely useful platform because it enables the users to search, collect, and organize data in a far more comprehensive, far less labor-intensive way than traditional databases. Leveraging Splunk's built-in data visualization and analytical features, HRD Korea have built custom tools to gain new insight and operational intelligence that organizations have never had before. This paper analyzes the NCS homepage. Concretely, applying Splunk in creating visualizations, dashboards and performing various functional and statistical analysis and structure without Web development skills. We presented practical use and implications through case studies.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.2
• /
• pp.145-149
• /
• 2003

Manufacturing facilities of the pharmaceuticals must meet certain level of the cleanness required so that foreign substances such as dust, moisture, heat, microorganism, or virus do not contaminate the product. In case of radiopharmaceuticals for medical treatment and diagnosis, not only should the operators and environment be protected from radiation but also need to be isolated from the foreign contaminant. Therefore, manufacturing facilities for radiopharmaceuticals must satisfy the design standards of both hot cell and clean room which are specified by GMP. However, standards of maintaining negative pressure for preventing spread of radioactive contaminant in isolated facilities conflict with the standards of maintaining positive pressure for keeping cleanness. To solve this problem, air pressure of hot cell was designed lower than in the adjacent area to meet standards of the radiation safety. To keep higher cleanness in certain part of the hot cell for filling, minimal relative positive pressure allows. In order to effectively maintain the cleanness that is required for production of Tc-99m generator, which takes 70% of whole demand of radiopharmaceuticals, the rooms placed in each side of production room are used as a buffer area and three lead hot cells are installed in production room. In this research, we established the appropriate engineered design concept for Tc-99m generator manufacturing facility, which satisfies both GMP cleanness standard for preventing particles, bacteria, other contaminants and the regulations of radiation safety for supervising and controlling the amount of radiation exposure and exhausted radioactivity. And the concept of multi-barrier buffer zones is introduced to apply negative air pressure for hot cell with first priority and to continue relative positive air pressure for clean room.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.3
• /
• pp.16-28
• /
• 2016

Advancing geo-spatial web technologies and their applications require compatible and interoperable heterogeneous browsers and platforms. Reduction of common or supporting components for web-based system development is also necessary. If properly understood and applied, OGC-based standards can be utilized as effective solutions for these problems. Thus, OGC standards are central to the design and development of web-based geo-spatial systems, and are particularly applicable to web services, which contain data processing modules. However, the application for OGC WPS 2.0 is at an early stage as compared with other OGC standards; thus, this study describes a test implementation of a web-based geo-spatial processing system with OGC WPS 2.0 focused on asynchronous processing functionality. While a binary thresholding algorithm was tested in this system, further experiments with other processing modules can be performed on requests for many types of processing from multiple users. The client system of the implemented product was based on open sources such as jQuery and OpenLayers, and server-side running on Spring framework also used various types of open sources such as ZOO project, and GeoServer. The results of geo-spatial image processing by this system implies further applicability and extensibility of OGC WPS 2.0 on user interfaces for practical applications.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.2
• /
• pp.91-100
• /
• 2018

Small and medium enterprises (SMEs) endeavor to overcome the adverse resource conditions and secure competitive advantage through technological innovation capability. Prior studies have focused on the overall or specific dimensions of technological innovation capability, and examined their performance impact. However, there has been less scholarly attention on the dynamic characteristics such as the relative importance of technological innovation capability or its performance impact at the different growth stages of a firm. In this vein, this study investigates the relationship between SME innovation capability and innovation performance at each growth stages of a firm. Based on the empirical analysis of manufacturing SMEs in Korea, we found that all dimensions of technological innovation capability had positive effects on innovation performance. However, each dimension of technological innovation capability had different effect on innovation performance by the growth stages. The planning capability can improve innovation performance at the growth and maturity stages. Manufacturing capability can have positive effect on innovation performance at the maturity stage. Both of new product development capability and commercialization capability contribute to innovation performance at all of the growth stages. This study suggests the guidelines for enhancing technological innovation capability at the different growth stages of SMEs. It also provides policy implications for the design and operation of growth-stage specific programs. Finally, the limitations of the research and future research directions are presented.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.469-475
• /
• 2017

Software reliability is one of the most basic and essential problems in software development. In order to detect the software failure phenomenon, the intensity function, which is the instantaneous failure rate in the non-homogeneous Poisson process, can have the property that it is constant, non-increasing or non-decreasing independently at the failure time. In this study, was compared the reliability performance of the software reliability model using the Landely lifetime distribution with the intensity function decreasing pattern and Erlang lifetime distribution from increasing to decreasing pattern in the software product testing process. In order to identify the software failure phenomenon, the parametric estimation was applied to the maximum likelihood estimation method. Therefore, in this paper, was compared and evaluated software reliability using software failure interval time data. As a result, the reliability of the Landely model is higher than that of the Erlang distribution model. But, in the Erlang distribution model, the higher the shape parameter, the higher the reliability. Through this study, the software design department will be able to help the software design by applying various life distribution and shape parameters, and providing software reliability attributes data and basic knowledge to software reliability model using software failure analysis.

• Culinary science and hospitality research
• /
• v.22 no.4
• /
• pp.288-301
• /
• 2016

This paper employed typology and stratification as key elements to estimate quality evaluation of vinegar drink through Delphi and AHP(analytical hierarchical process) method to contribute the market expansion of the vinegar drink as a health drink. Through literature research and brainstorming with professionals, the first round of Delphi method was conducted with the open-ended questions including five upper concepts, i.e. 'ingredients', 'production method', 'product characteristics', 'functions' and 'packaging design'. Original study had 50 lower concepts as a result of the first round and added 'marketing' as an additional upper concept. The second and third round of Delphi method have been conducted with closed-ended questions based on the 50 lower concepts resulted from the first round. To seek concordant objectivity among the answers from the survey, the study used Kendall's W coefficient of concordance. 11 items were removed while 16 items were removed at the third round leaving 23 items through second round of Delphi method. For the final round, this study utilized the Pairwise Comparison Method to figure out the relative importance of the 23 items for the prioritization. Finally, current study formulated the final items which should be considered as an important factor in the quality evaluation of vinegar drink.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.8
• /
• pp.39-49
• /
• 2020

Purpose: Current study aimed at exploring the roles of system justification in the effects of consumers' self-identification with the threatened social in-group on the within-domain versus across-domain consumption. It focused on whether there are positive effects of both of the self-definition and the self-investment on the in-group system justification, and also explored whether the system justification, in turn, could make positive effects on the consumption. Research design, data and methodology: The self-identification was approached in view of self-definition and self-investment when the in-group was threatened by members of their out group. The empirical study was performed with the single factor within-subject design based on the feeling of the consumers' being threatened when the in-group was criticized by the others. The in-group threatened was accessed from the memory of each of the undergraduate students participating in the empirical study by asking them to remember the events by which their important in-group was perceived to be threatened in their past life. Questionnaire data collected from the undergraduate students were used to verify research hypotheses by structural equation model in Amos 21.0 program. Results: First, the self-definition positively affected the within-domain versus across-domain consumption, but did not affect the in-group system justification. Second, the self-investment positively affected the in-group system justification. Third, the system justification made positive effects on the within-domain versus the across-domain consumption. Therefore, this article could contribute to the development of the theory related to compensatory consumption in the view that there could be the positive mediation roles of system justification in the effects of consumers' self-investment to their in-group on the within-domain versus across-domain consumption when the in-group is threatened. Conclusions: The results of this study could give managerial implications to brand or product marketing managers. How to vitalize consumers' self-definition with, and self-investment to, the threatened in-group is at issue to the marketers when consumers' important in-group was threatened by others. By evoking the in-group-based self-investment to consumers when the in-group was threatened, the marketers should increase the level of the system justification, and the marketers should promote the consumers to recognize that their products or brands are included into the within-self domain.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.21-27
• /
• 2023

The mold industry in Japan, an advanced country in the mold industry, is also at a point of great change. The main causes are the Ukraine crisis and the collapse of the global supply chain (parts supply chain) caused by COVID-19. In addition, the prices of overseas products are rising sharply due to rapid exchange rate fluctuations (decrease in the value of the yen). Until now, Japan's monotsukuri industry has been actively pursuing overseas expansion, riding the trend of globalization. However, the trend began to rapidly reverse, and now the monotsukuri industry that had expanded overseas is showing a tendency to return to Japan. Another factor of change is the change in the automobile industry, which is the most demanded product in the mold industry. As the automobile industry evolves from gasoline cars to electric cars, the number of parts that make up a car will drastically decrease. This trend is expected to increase the demand for small-scale production of a variety of products in the mold industry, and furthermore, it is expected that short delivery times will be required in parts development. As in Korea, the production population working in the mold industry is rapidly decreasing in Japan as well. Even if you add up the total population working in manufacturing in Japan, it only accounts for about 15%. Even in Japan, it is judged that it will be difficult to sustain the monotsukuri industry with this small production population. Therefore, since improvement in production efficiency cannot be expected with the same manual dexterity as before, the mold industry is also demanding the development of mold technology at a different level than before to increase productivity. In this paper, I would like to introduce new Japanese mold technology collected through attending the Intermold exhibition. This is an example of applying a dedicated pin (Gastos) to a mold to prevent an increase in internal pressure during plastic injection molding, and a deep drawing press molding technology with an inherent hydraulic function.