• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.249-255
• /
• 2009

In order to calculate the processing and reduction factor between fresh and dry Welsh onion which was widely used as a dried agricultural ingredient of food in Korea. 7 pesticides such as pyridalyl, kresoxim-methyl, spinosad, flufenoxuron, difenoconazole, metconazole, and tebufenozide were tested. After 2 sites field trial conducted and measured water contents by drying at $60^{\circ}C$ and analyzed the pesticide residue. Water contents of fresh and dried Welsh onion are 89.2 and 10.2% respectively. Averages of processing factor showed 7.24 of pyridalyl, 2.85 of kresoxim-methyl, 7.43 of spinosad, 3.17 of flufenoxuron, 4.38 of difenoconazole, 2.40 of metconazole and 8.13 of tebufenozide into 2 field samples. Averages of Reduction factor showed 0.87 of pyridalyl, 0.35 of kresoxim-methyl, 0.88 of spinosad, 0.38 of flufenoxuron, 0.52 of difenoconazole, 0.29 of metconazole and 0.98 of tebufenozide. Residual amounts of pesticides in/on fresh Welsh onion reduced during drying process.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.23 no.1
• /
• pp.94-110
• /
• 2010

Objective : This study was performed to evaluate the effect of immune reaction inductive substances such as phorbol-myristate-acetate(PMA), lipopolysaccharide(LPS), dermato-phagoides pteronyssus crude extract(DPE), dinitrochloro-benzene(DNCB) and Cryptotympana pustulata(CP), the Cryptotympana pustulata extracting substance at simultaneously on the translocation of nuclear factor-kappa B(NF-${\kappa}B$) towards to the nucleus and the mRNA expression patterns of various cytokine genes in Human acute monocytic leukemia cell line(THP-1 cells), monocytes of human. Experiment : To analyze cytokine genes expression patterns, the RT-PCR method was used, measuring tumor necrosis factor(TNF)-$\alpha$ that had been secreted during cell culture in the ELISA method. The morphological change in the cell observed during THP-1 cell culture was observed using a scanning electron microscope (SEM) and the quantitative distribution in the cell NF-${\kappa}B$ was analyzed through immunocytochemistry and a confocal microscopy. Result : CP showed different influences onto the mRNA expression patterns of cytokine genes with PMA, LPS. DPE and DNCB according to the types of immune inductive substances in the THP-1 cells. The expressions of inter-leukin(IL)-10, interferon(INF)-$\gamma$, TNF-$\alpha$ and monocyte chemoattractantant protein(MCP)-1 induced by PMA were suppressed by CP while the expression of transforming growth factor(TGF)-$\beta$ was promoted. Regarding the secretion pattern of TNF-$\alpha$ according to PMA processing, its secretion amount was increased by CP concurrent processing, in case of processing CP onto PMA and LPS, We discovered that the secretion amount of TNF-$\alpha$ was increased. Upon processing PMA and LPS on the THP-1 cell strain at the same time or either additionally processing CP thereon, the movement increase towards the nucleus from the NF-${\kappa}B$ cell cytoplasm, a transcription factor was able to be observed. Conclusion : In this study, Cryptotympana pustulata extracting substance was confirmed that it had an influence on expression patterns of cytokine genes according to the actions of a variety kinds of immune reaction inductive substances processed on the monocyte THP-1 cell of humans. Therefore, additional studies as for the immune adjusting function of Cryptotympana pustulata are considered to be able to offer important materials for curing immune abnormal diseases such as atopy dermatitis afterward.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.34-39
• /
• 2010

We developed a path algorithm for ultrafast/wide area laser processing. Demands for high precision laser processing with a wide area has been increasing for a number of applications such as in solar cell battery, display parts, electronic component and automobile industry. Expansion of the area in which laser processing is an important factor to handle the ultrafast/wide area processing, it will require a processing path. Processing path is path of 2- axis stage and stage of change in velocity can be smooth as possible. In this paper, we proposed a smoothingnurbs method of improved speed profile. This method creates soft path from edge part, it is main purpose that scan area ($50mm{\times}50mm$) inside processing path makes path of topology of possible straight line. We developed a simulation tool using Visual C++.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.6
• /
• pp.640-647
• /
• 2012

Current electronic products are dominated by the laser processing and the application will be extended this time. Especially, demands for high precision laser processing with a large area has been increasing for a number of applications such as in solar cell battery, display parts, electronic component and automobile industry. In this paper we designed an on-the-fly system for ultrafast/high precision/large area laser processing. In addition, we have developed the path algorithm for large area. Expansion of the area in which laser processing is an important factor to handle the ultrafast/wide area processing, it will require a processing path. Processing path is path of 2- axis stage and stage of change in velocity can be smooth as possible. We proposed a path of the user concept using NURBS(Non-Uniform Rational B-Spline)method. Through our experiment with the chopper, was to prove the continuity of edge parts. Through basic shape experiments, we proved that large area can be processed using laser. We developed a simulation tool using Visual C++.

• Journal of Power Electronics
• /
• v.6 no.4
• /
• pp.330-339
• /
• 2006

This paper deals with novel electronic ballast based on single-stage power processing topology using a symmetrical half-bridge inverter and current injection circuit. The half-bridge inverter drives the output parallel resonant circuit and injects current through the power factor correction (PFC) circuit. Because of high frequency current injection and high frequency modulated voltage, the proposed circuit maintains the unity power factor (UPF) with low THD even under wide variation in ac input voltage. This circuit needs minimum and lower sized components to achieve the UPF and high efficiency. This leads to an increase in reliability of ballast at low cost. Furthermore, to reduce cost, the electronic ballast is designed for two series-connected fluorescent lamps (FL). The analysis and experimental results are presented for ($2{\times}36$ Watt) fluorescent lamps operating at 50 kHz switching frequency and input line voltage (230 V, 50 Hz).

• Transactions of Materials Processing
• /
• v.10 no.4
• /
• pp.319-328
• /
• 2001

Quantitative evaluation of the tribological conditions at the tool-workpiece interface in metal forming is usually accomplished by the ring compression test. This paper describes an experimental investigation into friction factor under warm forming conditions according to the lubricants and the lubricating methods using the ring compression test. Four different lubricants, two water based graphite and two oil based graphite lubricants, and three different lubricating methods were applied in the experiments. Calibration curves with the friction shear factor were obtained using FEM analysis and verified by the experimental results. The influence of lubricant and lubricating methods on friction are discussed. In the ring compression test, the lower friction factor got to spray the oil based lubricant on die and billet in warm forging temperature.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.140-144
• /
• 2014

A general linearly constrained adaptive array is examined in the weight vector space to illustrate the array performance with respect to the gain factor. A narrowband linear adaptive array is implemented in a coherent signal environment. It is shown that the gain factor in the general linearly constrained adaptive array has an effect on the linear constraint gain of the conventional linearly constrained adaptive array. It is observed that a variation of the gain factor of the general linearly constrained adaptive array results in a variation of the distance between the constraint plane and the origin in the translated weight vector space. Simulation results are shown to demonstrate the effect of the gain factor on the nulling performance.

• Journal of Korean Society for Quality Management
• /
• v.30 no.2
• /
• pp.86-98
• /
• 2002

Defining the relationship between the quality of injection molded parts and the process condition is very complicate because of lots of factor are involved and each factor has a non-linearity. With the development of CAE(Computer Aided Engineering) technology, the estimation of volumetric shrinkage of injection mold parts is possible by computer simulation even though restricted application. In this research, Neural Network applied for finding optimal processing condition. The percent of volumetric shrinkage compared on each case and show neural network can be successfully applied selecting optimum condition not only within factor level but also between factor level.

• Transactions of Materials Processing
• /
• v.1 no.1
• /
• pp.42-51
• /
• 1992

The ring compression test has been widely employed as an experimental means to determine the friction factor. The calibration curves are obtained by the rigid-plastic finite element analysis for various work-hardening exponent and strain-rate hardening exponent. The effects of work-hardening exponent and strain-rate hardening exponent are thoroughly studied and discussed from the finite element computation. The change of friction factor during height reduction in ring compression is also discussed. Then, the method to estimate the change of friction factor during ring compression is proposed.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.11a
• /
• pp.165-173
• /
• 2000

Analytic models have been developed to solve integrated production-distribution problems in supply chain management (SCM). As one of major constraints in analytic models, capacity, which is the total operation time in this paper has mostly been known or disregarded assuming infinite capacity. Also, as major factors, machine processing time to fabricate or assemble a part or product at a certain machine center in production system and vehicle processing time to deliver a product to a customer by a certain vehicle in distribution system have been fixed and regarded as a static factor, But in the real systems significant differences exit between capacity and the required time to achieve the production-distribution plan and between processing time and consumed time to process a part or product. In this paper, capacity and processing times in the analytic model are considered as dynamic factors and adjusted by the results from independently developed simulation model, which includes general production-distribution characteristics. Through experiments, we obtain the more realistic solutions reflecting stochastic natures by performing the iterative analytic-simulation procedure.