• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.1
• /
• pp.49-58
• /
• 2003

Compared with generic GPS receiver, post-processing software GPS receiver has many advantages for high dynamic vehicle tracking. It has the advantage of the application of various tracking algorithms and aiding schemes. The post-processing system observes the carrier phase measurement data from the recorded GPS signals, detects and isolates the cycle slip. The observed carrier phase data and the raw data of the reference station are processed by carrier phase DGPS scheme. And the integer ambiguity resolution algorithm is used for resolving single frequency carrier phase ambiguity. The results of static and real flight test are presented and show that the proposed GPS translator processing system satisfies submeter accuracy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.391-391
• /
• 2016

The carrier transport is a key factor that determines the device performances of semiconductor devices such as solar cells and transistors [1]. Particularly, devices composed of in amorphous semiconductors, the transport is often restricted by carrier trapping, associated with various defects. So far, the trapping has been studied for as-grown films at room temperature; however it has not been studied during growth under plasma processing. Here, we demonstrate the detection of trapped carriers in hydrogenated amorphous silicon (a-Si:H) films during plasma processing, and discuss the carrier trapping and defect kinetics. Using an optically pump-probe technique, we detected the trapped carriers (electrons) in an a-Si:H films during growth by a hydrogen diluted silane discharge [2]. A device-grade intrinsic a-Si:H film growing on a glass substrate was illuminated with pump and probe light. The pump induced the photocurrent, whereas the pulsed probe induced an increment in the photocurrent. The photocurrent and its increment were separately measured using a lock-in technique. Because the increment in the photocurrent originates from emission of trapped carriers, and therefore the trapped carrier density was determined from this increment under the assumption of carrier generation and recombination dynamics [2]. We found that the trapped carrier density in device grade intrinsic a-Si:H was the order of 1e17 to 1e18 cm-3. It was highly dependent on the growth conditions, particularly on the growth temperature. At 473K, the trapped carrier density was minimized. Interestingly, the detected trapped carriers were homogeneously distributed in the direction of film growth, and they were decreased once the film growth was terminated by turning off the discharge.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.883-891
• /
• 2009

This paper proposes Ethernet linear protection switching technology in order to provide the SONET/SDH-like resiliency over Metro Ethernet Networks. The proposed design is made of an architecture with a control processor board and several data processing boards, where the control processor board is independent of data processing board, providing a flexible solution for carrier Ethernet system. However, it leads an increasing message delay between inter-processors. In this paper, we implement and confirm a restoration of failed transport connections withing 50 millisecond in spite of increasing message delay between the control processing board and data processing board providing carrier-class network survivability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1486-1491
• /
• 2000

A Multicarrier system required a lower speed paralled-type of signal processing in contrast to a fast serial processing in a single carrier CDMA system. For the analysis we evaluate MC-CDMA system performance with that of a single-carrier CDMA system and a multi-carrier CDMA system based on the various jamming conditions. Also we studied to the capacity level against the threat environment through the performance comparison in commercial CDMA system and Limiting repeater system. as a result we found that M-CDMA system has a robustness to narrowband interference and multipath environments like as a Rayleigh fading.

• Journal of Surface Science and Engineering
• /
• v.32 no.3
• /
• pp.276-280
• /
• 1999

Electrical properties of electrochromic (EC) InN thin films prepared by rf ion plating were studied. There was a correlation between the electrical properties and the electrochromism in the InN films, particularly, carrier concentration changes were responsible for the electrical resistivity changes of the films due to the electrochromism. These carrier concentration changes were caused by chemisorbed hydroxyl groups and protons. From these results, it was proved that the carrier concentration changes of the InN films was responsible for the electrochromism in the visible and near-infrared region.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.378-390
• /
• 2001

In this paper, it is analyzed that the error performance of a Multi-Carrier DS-CDMA system in a single cell with multipath Rician fading and multiple access interference (MAI) and the error performance of the system is compared with that of a Sing1e-Carrier DS-CDMA system. Moreover, the convolutional coding techniques with code rate of 1/2, 1/3, and 1/4 are adopted in order to improve the error performance degraded by the multipath fading and MAI and performance improvement through the coding techniques is analyzed. As a result, it is shown that the number of users in each system can be determined by the number of branches of the rake receiver in a Single-Carrier DS-CDMA system and the number of carriers in a Multi-Carrier DS-CDMA system. Furthermore, the convolutional coding should be chosen with considering the trade-off between coding gain and a power limitation in a Multi-Carrier DS-CDMA system. In case of increasing the number of carriers, the processing gain is decreased but the error performance is improved through the effect of frequency diversity and the system can be possibility implemented due to the low chip rate.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.23.5-23
• /
• 2001

This paper is concerned with the vehicle platooning in the AHS (Automated Highway Systems). For this, a relative navigation system is developed for the vehicles operating as a platoon. The relative navigation system is based on two sensors including GPS and MMWR (Millimeter-Wave Radar) and the federated Kalman Iter processing measurements of them. The architecture of this system requires GPS measurements of a preceding vehicle via communication link. Even if GPS measurements are available, they contain errors which are unacceptably high in vehicle platooning. Therefore, GPS carrier phase is considered. Integer ambiguities of GPS carrier phase measurements are determined by using MMWR ...

• Transactions of Materials Processing
• /
• v.14 no.3 s.75
• /
• pp.207-214
• /
• 2005

Blanking process is widely used fur producing various structural parts. However, fine blanking technology is frequently used as a single step blanking operation with clean cut surface of a sheared surface because the fractured surface of parts causes serious problems in the final product and therefore it must be removed by the post-processing in case of the conventional blanking. In the present investigation, a fine blanking process was designed within the framework of progressive die to produce a carrier plate assembled within the auto transmission. Finite element analysis of the shearing behavior at the respective stage of the progressive fine blanking was conducted to validate the designed die parameters. Finally the designed progressive fine blanking process was experimentally evaluated by using the machined die.

• Journal of Ceramic Processing Research
• /
• v.20 no.1
• /
• pp.18-23
• /
• 2019

Chemical looping combustion (CLC) is a promising carbon capture and storage (CCS) technology whose efficiency and cost primarily relies on the oxygen carrier materials used. In this paper, gadolinium-doped ceria (GDC, Ce0.9Gd0.1O1.95) was added as a promoter to improve the oxygen transfer rate of MgMnO3-δ oxygen carrier materials. Increasing GDC content significantly increased the oxygen transfer rate of MgMnO3-δ-GDC composites for the reduction reaction due to an increase in the surface adsorption of CH4 via oxygen vacancies formed on the surface of the GDC. On the other hand, the oxygen transfer rate for the oxidation reaction decreased linearly with increasing GDC content due to the oxygen storage ability of GDC. Adsorbed oxygen molecules preferentially insert themselves into oxygen vacancies of the GDC lattice rather than reacting with (Mg,Mn)O to form MgMnO3-δ during the oxidation reaction.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.749-750
• /
• 2008