• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.128-136
• /
• 2011

Equal channel angular pressing (ECAP) with intermediate heat treatment was employed to optimize the strength of Cu-15 wt.%Ag. Changes in microstructure, electrical properties and mechanical properties were studied as a function of pressing methods and heat treatment. ECAPed Cu-15wt.%Ag exhibited ultrafine-grained microstructures with the shape and distribution of Ag-rich lamellae dependent on the processing routes. For route A in which the sample was pressed without rotation between each pass, the initial dendrites of Ag-rich phase were elongated along the shear direction and developed into elongated filaments. For route C in which the sample was rotated by 180 degree after each pass, the morphology of initial dendrites of Ag-rich phase was not much modified and the networked structure remained even after 8 passes of ECAP. For route Bc in which the sample was rotated by 90 degree after each pass, the initial dendrites became finer by fragmentation with no pronounced change of the shape and distribution of Ag-rich lamellae. The strength of Cu-15wt.%Ag ECAPed using route Bc was found to be greater than those ECAPed using route A, suggesting that the substructural strengthening is more effective in strengthening than the interface strengthening.

• 한국측량학회지
• /
• 제11권2호
• /
• pp.89-100
• /
• 1993

본 연구는 CAD와 LISP(LIST Processing)을 이용한 도로노선 결정에 있어서의 토공량 산정에 관한 연구이다. 컴퓨터의 비약적인 발전과 산업분야에서의 이용증대는 CAD/CAM/CAE 기술의 발전으로 이어져 자동설계 및 자동제작을 가능케 하고 있으며 또한 토목설계의 자동화도 꾸준히 추진되어 오고 있는 실정이다. 이러한 자동화 작업의 일환으로 본 연구에서는 도로노선 결정시 각 노선의 토공량 산정을 자동화하여 토목설계업무의 효율성을 높이고자 하였다. 연구의 방법으로 지형도에 DTM(Digital Terrain Model) 개념을 도입하여 지형정보를 자동독취할 수 있도록 프로그램화 한 후 이 데이타를 가지고 LISP 언어를 이용하여 체계적인 알고리즘을 만든 후 CAD 시스템과 접목시켜 종·횡단 면적과 토공량을 산정해서 유토곡선을 출력하는 자동설계 시스템을 시험적으로 구축하는 데 그 목적을 두고 있다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2008년도 춘계학술발표대회
• /
• pp.1035-1038
• /
• 2008

Network mobility (NEMO) has been studied extensively due to its potential applications in military and public transportation. NEMO Basic Support Protocol (NBSP) [1], the current NEMO standard based on mobile IPv6, can be readily deployed using the existing mobile IPv6 infrastructure. However, for Nested network mobility, multi-level tunnel and too many Binding Update packets results in substantial performance overhead, generally known as route sub-optimality, especially in the bottleneck root mobile router (root-MR) and Access Router. In this paper, we propose a route optimization mechanism for nested network mobility management to reduce the overhead of root-MR. In this system, Mobile Router (MR) has a cache that stores Mobile Network Nodes' (MNN) information, Correspondent Nodes' (CN) information for every MNN，and the attachments information with its subnet MRs. Home Agent performs Binding Update with CNs responsible for MRs. Through this mechanism, the number of tunnel is limited between CN and MR and the overhead of root-MR is reduced obviously.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권2호
• /
• pp.700-713
• /
• 2015

It is critical to design energy-efficient routing protocols for battery-limited mobile ad hoc networks, especially in which the energy-consuming MIMO techniques are employed. However, there are several challenges in such a design: first, it is difficult to characterize the energy consumption of a MIMO-based link; second, without a careful design, the broadcasted RREP packets, which are used in most energy-efficient routing protocols, could flood over the networks, and the destination node cannot decide when to reply the communication request; third, due to node mobility and persistent channel degradation, the selected route paths would break down frequently and hence the protocol overhead is increased further. To address these issues, in this paper, a novel Greedy Energy-Efficient Routing (GEER) protocol is proposed: (a) a generalized energy consumption model for the MIMO-based link, considering the trade-off between multiplexing and diversity gains, is derived to minimize link energy consumption and obtain the optimal transmit model; (b) a simple greedy route discovery algorithm and a novel adaptive reply strategy are adopted to speed up path setup with a reduced establishment overhead; (c) a lightweight route maintenance mechanism is introduced to adaptively rebuild the broken links. Extensive simulation results show that, in comparison with the conventional solutions, the proposed GEER protocol can significantly reduce the energy consumption by up to 68.74%.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.931-937
• /
• 2012

The microstructure of Cu-15 wt%Ag composites fabricated by equal channel angular pressing (ECAP) with intermediate heat treatment at $320^{\circ}C$ was investigated by transmission electron microscopy (TEM) observations. Ag precipitates with a thickness of 20-40 nm were observed in the eutectic region of the Cu-15 wt%Ag composite solution treated at $700^{\circ}C$ before ECAP. The Cu matrix and Ag precipitates had a cube on cube orientation relationship. ECAPed composites exhibited ultrafine-grained microstructures with the shape and distribution dependent on the processing routes. For route A in which the sample was pressed without rotation between each pass, the Cu and Ag grains were elongated along the shear direction and many micro-twins were observed in elongated Cu grains as well as in Ag filaments. The steps were observed on coherent twin boundaries in Cu grains. For route Bc in which the sample was rotated by 90 degrees after each pass, a subgrain structure with misorientation of 2-4 degree by fragmentation of the large Cu grains were observed. For route C in which the sample was rotated by 180 degrees after each pass, the microstructure was similar to that of the route A sample. However, the thickness of the elongated grains along the shear direction was wider than that of the route A sample and the twin density was lower than the route A sample. It was found that more microtwins were formed in ECAPed Cu-15 wt%Ag than in the drawn sample. Grain boundaries were observed in relatively thick and long Ag filaments in Cu-15 wt%Ag ECAPed by route C, indicating the multi-crystalline nature of Ag filaments.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.1283-1285
• /
• 2007

A wireless sensor network is the combination of a large number of deployed sensors over an area. Communication between the sensors is the most important factor for a successful sensor network. It is mandatory that long distance and multi-hop communication will occur between sensors. Generally sensors relay the sensed data of a particular territory to the command center via a base station. For the non uniformed deployment of sensors many sensors may deploy in hostile areas surrounded by full of obstacles or in other condition it may be out of the direct communication range of the base station. It seems a critical problem for routing data to and from those sensors to the base station. This paper proposes a route management scheme using a dynamic load balancing approach based on residual energy of each agent sensors.

• 한국세라믹학회지
• /
• 제40권12호
• /
• pp.1159-1164
• /
• 2003

Two processing routes (i.e., the gel casting and polymer preform routes) using polymer beads were studied to fabricate porous ceramics with a cellular structure. The gel casting route, comprising the gel casting of a ceramic slurry mixed with polymer beads, was found to be inadequate to produce porous ceramic bodies with a interconnected pore structure, due to complete coating of the slurry on the polymer beads, which left just isolated pores in the final sintered bodies. The polymer preform route, involving the infiltration of a polymer beads preform with the ceramic slurry, successfully produced porous ceramics with a highly interconnected network of spherical pores. The pore size of 250-300 $\mu\textrm{m}$ was demonstrated and the porosity ranged from 82 to 86%. This process is advantageous to control the pore size because it is determined by the sizes of polymer beads used. Another feature is the avoidance of hollow skeleton, giving a high strength.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2003년도 추계학술발표논문집 (중)
• /
• pp.1137-1140
• /
• 2003

인터넷 mobility 기술의 발전으로 인해 Mobile IPv6 를 기반으로 하는 이동 네트워크(Mobile Network, NEMO)기술이 등장하였으며, MR(Mobile Router)와 HA(Home Agent)간의 bi-directional 터널을 통해 네트워크의 이동성을 지원한다. 그러나. 이동네트워크 안에 또 다른 이동네트워크가 존재하는 중첩된 이동네트워크에서는 bi-directional 터널이 중복되는 routing problem이 발생한다. 따라서 본 논문에서는 중첩된 이동네트워크가 계층적 구조를 가지는 것을 이용하여, 최상위 MR 이 지역 HA 역할을 수행하게 항으로써, 중첩된 이동네트워크내의 노드들을 위한 경로최적화와 마이크로 이동성을 동시에 지원할 수 잇도록 한다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 춘계학술발표대회
• /
• pp.168-170
• /
• 2016

Drone package delivery routing problem is realistic problem used to find efficient route of drone package delivery service. In this paper, we present an approach for solving drone routing problem for package delivery service using two different heuristics algorithms, genetic and nearest neighbor. We implement and analyze both heuristics algorithms for solving the problem efficiently with respect to cost and time. The respective experimental results show that for the range of customers 10 to 50 nearest neighbor and genetic algorithms can reduce the tour length on average by 34% and 40% respectively comparing to FIFO algorithm.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.249-263
• /
• 1997

This paper addresses the parts route selection and economic design in flexible manufactuirng system (FMS). Parts are processed through several stage workstations according to operation sequences. The machine of each workstation can do multiple operation functions. And the operation stage of a part can be processed in several workstations, which are non-identical in functional performance. The objective of this paper is to determine the processing routes of parts, number of machine at each workstation, number of vehicle and makespan time. Two models are suggested. One is assumed that the operation stage of parts can be processed at the only one among several available workstations. Other is assumed that the operation stage of parts is allowed to be processed at several workstations. Parts are transported by automated guided vehicles (AGVs). The decision criteria is to minimize the sum of processing cost, travel cost, setup cost and overhead cost. The formulation of models is represented. A solution algorithm is suggested, and a numerical example is shown.