• Korean Chemical Engineering Research
• /
• 제44권6호
• /
• pp.659-668
• /
• 2006

실험계획법을 이용하여 nitromethane을 초임계수산화(SCWO)로 분해시키는 공정의 최적화 연구를 진행하였다. Lab scale 반응설비를 이용하여 처리수의 COD와 T-N을 최소화하는 SCWO 공정의 최적 운전조건을 도출하였으며, scale-up 문제점을 파악하기 위해 SCWO pilot plant 실험 결과와 lab scale 최적화 실험 결과를 비교하였다. 처리수의 COD와 T-N을 최적화 목적 변수(KPOV)로 설정하였으며, 예비실험을 통해 반응 온도(temp)와 nitromethane과 암모니아수의 몰 비(NAR)를 주요 운전 변수(KPIV)로 설정하였다. 최적화 실험은 통계적 실험계획법인 중심합성설계법을 사용하였으며, 실험결과의 해석은 반응표면법을 활용하였다. 주 효과 분석결과 처리수의 COD는 Temp 증가에 따라 급격하게 감소하며, NAR 증가에 따라 약간 감소하는 것으로 나타났으며, T-N은 Temp 와 NAR 증가에 따라 감소하였다. Temp가 $420{\sim}430^{\circ}C$로 낮을 때에는 NAR 증가에 따라 T-N이 급격히 감소하였으나, $450^{\circ}C$ 이상으로 높을 때에는 큰 변화가 없었다. 최적화 실험 결과를 회귀분석 하여 처리수의 COD와 T-N 을 예측할 수 있도록 Temp와 NAR이 변수인 2차식으로 회귀식을 도출하였으며, 결정계수($r^2$)와 표준화잔차의 정규성을 분석하여 회귀식이 실험결과를 잘 모사하는 것을 확인하였다. 회귀식을 이용하여 COD < 2 mg/L, T-N<40 mg/L를 동시에 만족시키며 부식 위험이 적은 nitromethane 분해 최적 운전 조건은 Temp $450-460^{\circ}C$, NAR 1.03-1.08로 설정하였다. SCWO pilot plant를 이용하여 nitromethane 분해 최적 조건을 검증하고, SCWO 공정의 scale-up 문제점을 파악하는 연구를 실시하였다. SCWO pilot plant 실험 결과를 lab scale 반응설비에서 도출한 COD와 T-N의 회귀식과 비교한 결과 오차가 증가하지만 회귀식이 pilot plant 실험결과도 잘 나타내는 것을 확인할 수 있었다. Pilot plant 실험결과에 대한 회귀식의 적합성은 실험값과 예측값의 비교도와 표준화잔차의 정규성으로 검증하였다.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.582-587
• /
• 2003

To examine the effect of heat treatment temperature in finishing process on PET/PBT Fabric, PET/PBT Fabrics were treated at different relaxing temp., pre-set temp., and final-set temp.. The dimensions such as thickness and density were measured, and the handles were evaluated by Kawabata system. In relaxing which was wet heat treatment, thickness and bulkiness were increased, and NUMERI, FUKURAMI, SOFUTOSA, and THV also were increased but KOSHI was decreased with elevating temperature. With elevating pre-set temp., thickness and bulkiness were decreased, but KOSHI was increased. NUMERI, FUKURAMI, SOFUTOSA, and THV were the best at 180$^{\circ}C$ pre-set treatment. In final-set which was dry heat treatment like pre-set, thickness, bulkiness, NUMERI, HUKURAMI, SOFUTOSA, and THV were decreased, but KOSHI value was increased with elevating temperature. Therefore the best heat treatment condition was 130$^{\circ}C$ relaxing, 180$^{\circ}C$ pre-set, and 160$^{\circ}C$ final-set. And the handle of PET/PBT Fabric was affected much more by relaxing temp. than pre-set temp. and final-set temp.

• 소성∙가공
• /
• 제30권2호
• /
• pp.91-98
• /
• 2021

The present study deals with the microstructure and mechanical properties of 700 MPa-grade high-strength seismic resistant reinforced steel bars fabricated by various TempCore process conditions. For the steel bars, in the surface region tempered martensite was formed by water cooling and subsequent self-tempering during TempCore process, while in the center region there was ferrite-pearlite or bainite microstructure. The steel bar fabricated by the highest water flow and the lowest equalizing temperature had the highest hardness in all regions due to the relatively fine microstructure of tempered martensite and bainite. In addition, the steel bar having finer microstructures as well as the high fraction of tempered martensite in the surface region showed the highest yield and tensile strengths. The presence of vanadium precipitates and the high fraction of ferrite contributed to the improvement of seismic resistance such as high tensile-to-yield strength ratio and high uniform elongation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.44-44
• /
• 2009

Recently, transparent ZnO-based TFTs have attracted much attention for flexible displays because they can be fabricated on plastic substrates at low temperature. We report the fabrication and characteristics of ZnO channel layers(ZnO TFTs) having different channel thicknesses. The ZnO film were deposited as active channel layers on $Si_3N_4/Ti/SiO_2p$-Si substrates by rf magnetron sputtering at $100\;^{\circ}C$ without additional annealing. Also the Zno thin films deposited at oxygen partial pressures of 40%. ZnO TFTs using a bottom-gate configuration were investigated. The $Si_3N_4$ film were deposited as gate insulator by PE-CVD at $15\;^{\circ}C$. All Processes were processed below $150^{\circ}C$ which is optimal temperature for flexible display and were used dry etching method.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.129-139
• /
• 2004

DXD-19 is a flexible sheet explosive, which is a new polymer-bonded explosives(PBX's). DXD-19 is relatively insensitive and can be extruded into various configurations to be applied to munitions. A typical application includes multi-point initiation for the warhead, cutting/severance devices and transfer lines. The DXD-19 composition employs a binder system derived from the thermoplastic elastomer(HyTemp 4454) containing $5\%$ OH terminated with isocyanate curable for increasing mechanical properties. The use of an elastomer CAB increases its mechanical properties and the use of an energetic plasticizer BDNPF/BDNPA(F/A) improves the process ability as well as energy contents. The composition of the extruded DXD-19 formulation is formed $\%$ weight of $PETN/HyTemp/ATEC/(F/A)/CAB=72\~73/12\~13/6\~7/6\~7/1\~2$. Our safety tests of DXD-19 shows Insensitivity to an impact test and friction test, good thermal stability and excellent mechanical properties.

• 한국의류학회지
• /
• 제13권4호
• /
• pp.357-369
• /
• 1989

The purpose of this study was to investigate the effects of treatment temperature and time on the, of easy-care and strength properties of the wet fixation processed rayon fabrics. Viscose rayon fabrics were treated with mixed resins of melamine formaldehyde (MF) and DMDHEU by one bath and two bath wet fixation processes. The MF/DMDHEU mixed resin concentrations were 50/100, 50/150, 100/100 and 100/150(g/1). Magnasium chloride was used as a catalyst. The wet fixation conditions were 24hrs at room temperature,20 mins at $75^{\circ}C$ and 5 mins at $105^{\circ}C$ Wet fixation processed fabrics did not show the difference in the resin add-one, DP ratings and wrinkle recovery angles by the different treatment temperatures and times. DP ratings were in the order of $105^{\circ}C>75^{\circ}C>room$ temp, in one bath and two bath wet fixation. Breaking and tearing strength of one bath processed fabrics showed in the order of $75^{\circ}C>room\;temp>105^{\circ}C$ The breaking strength of two bath processed fabrics showed in the order of $105^{\circ}C>75^{\circ}C>room$ temp. Tearing strength showed in the order of $75^{\circ}c>105^{\circ}C>room$ temp. Abrasion resistances were in the order of $75^{\circ}C>105^{\circ}C>room$ temp. in one bath and two bath processes.

• 대한환경공학회지
• /
• 제27권2호
• /
• pp.191-197
• /
• 2005

Ceriodaphnia dubia를 이용한 새로운 독성시험법인 온도증가 단기독성평가법(ToxTemp, ToxCity test based on TEMPerature control)을 이용하여 농약성분에 대한 민감도를 조사하였다. BPMC, Diazinon, Fenitrothion등 하수의 생물학적 처리에 독성을 나타낼 수 있는 물질들에 대하여 기존의 실험방법인 표준 48시간 독성시험법과 비교했을 때 온도증가법은 $1{\sim}1.5$시간의 짧은 접촉시간에도 농약의 독성을 잘 감지할 수 있음을 알 수 있었다. 또한 중금속, 독성 유기화합물 그리고 농약성분을 비교, 평가했을 때 온도증가법은 1.25시간의 짱은 접촉시간 내에 48시간독성법의 결과와 높은 상관관계를 유지하며 독성을 감지하였다. 염색공단 폐수와 하수 등 실폐수에서의 독성평가능을 검토하기 위하여 활성슬러지를 이용한 질산화율, 산소이용율(OUR)과 C. dubia를 이용한 표준 48시간 독성시험법, 온도증가법을 비교하였다. 그 결과 OUR을 이용한 평가에서는 비교적 높은 질산화율 저해도를 보인 원수에 대해서도 독성민감도가 낮아 현장적용에 한계를 나타낸 반면 C. dubia를 이용한 표준 48시간 독성시험법과 온도증가법은 각기 다른 수준의 독성에 대해 민감하게 차이를 보였으며, 이 두 방법은 질산화율 저해도와 좋은 상관관계를 보였다. 온도증가법은 표준 48시간 독성시험법에 비해 1.5% 정도 민감도가 떨어지지만 현장에서의 신속한 감지가 가능하다는 점에서 현장에서의 질산화 독성진단에 대한 적용가능성이 높음을 보여주었다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2008년도 춘계학술대회
• /
• pp.23-29
• /
• 2008

- High Density Plasma Source-CCP-Dual/Triple, RF Frequency Control - Radical/Flux Analysis - Low Pressure Process - Chamber Design (Process gap/Wall gap) - Chamber Temp. Control. - ESC Dielectric Materials - Uniform Gas Injection

• 한국물환경학회지
• /
• 제26권1호
• /
• pp.96-103
• /
• 2010

In this work, the presence of nitrification biochemical oxygen demand (NBOD) frequently occurred in the sewer outflow in winter season was analysed by the COD fraction methods using the respirometry and process simulations with real operation data measurements and analysis. The activated sludge models applied in this process simulation were based on the ASM No.2d temp. models, published by International Association on Water Quality (IAWQ). The ASM No.2d model is an extension of the ASM No.2 model and takes into account of carbon removal, nitrification, denitrification and phosphorus removal. The denitrifying capacity of phosphorus accumulating organisms has been implemented in the ASM No.2d model because experimental evidence shows that some of the phosphorus accumulating organisms can denitrify. It was shown that the concentrations of autotrophs (X_AUT) in the secondary clarifier and the $NH_4-N$ of T-N increased in the presence of NBOD measurements. Because of the low temperature (average $8^{\circ}C$) and possible operational troubles, the outcoming autotrophs exhausted oxygen in the process of nitrifying $NH_4-N$.

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.218-224
• /
• 2020

PURPOSE. The objectives of this study were to evaluate the fracture strength and fracture patterns of provisional crowns fabricated from different materials and techniques after receiving stress from a simulated oral condition. MATERIALS AND METHODS. A monomethacrylate-based resin (Unifast Trad) and a bis-acryl-based (Protemp 4) resin were used to fabricate provisional crowns using conventional direct technique. A milled monomethacrylate resin (Brylic Solid) and a 3D-printed bis-acrylate resin (Freeprint Temp) were chosen to fabricate provisional crowns using the CAD/CAM process. All cemented provisional crowns (n=10/group) were subjected to thermal cycling (5,000 cycles at 5°-55℃) and cyclic occlusal load (100 N at 4 Hz for 100,000 cycles). Maximum force at fracture was tested using a universal testing machine. RESULTS. Maximum force at fracture (mean ± SD, N) of each group was 657.87 ± 82.84 for Unifast Trad, 1125.94 ± 168.07 for Protemp4, 953.60 ± 58.88 for Brylic Solid, and 1004.19 ± 122.18 for Freeprint Temp. One-way ANOVA with Tamhane post hoc test showed that the fracture strength of Unifast Trad was statistically significantly lower than others (P<.01). No statistically significant difference was noted among other groups. For failure pattern analysis, Unifast Trad and Brylic Solid showed less damage than Protemp 4 and Freeprint Temp groups. CONCLUSION. Provisional crowns fabricated using the CAD/CAM process and the conventionally fabricated bis-acryl resins exhibited significant higher fracture strength compared to conventionally fabricated monomethacrylate resins after the aging regimen. Therefore, CAD/CAM milling and 3D printing of provisional restorations may be good alternatives for long term provisionalization.