• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.130-133
• /
• 2001

A multifilamentary Bi-2223 HTS tape for superconducting power applications was studied through the fabrication of 250-meter long tapes by the PIT(powder in tube) process. To fabricate continuous long wire, a drawing machine, a two-drum bull block and a rolled tape winding machine were developed. Especially, 250-meter long tapes were heat treated in the shape of pancake coil to reduce the heat affect zone and to achieve the high critical current. Engineering critical current density was improved through both the enhancements of critical current density by control of thermal process and the increase of filling factor by using thin Ag alloy sheath tubes less than 1.5 mm in thickness. We have made successfully 250-meter long 37 filamentary tapes with high filling factor up to 31 % employing the modified drawing and rolling technique. The critical current of 250-meter long tapes with pancake coil type was measured by transport method at self-field up to 250 gauss of center field. The measured values, based on the transport critical current at self-field, $I_{c}$ -B characteristics and magnetic field analysis, are 34 A of I$_{c}$ and 4.0 $kA/\textrm{cm}^2$ of $J_{e}$ at 250 m, 77 K, and 0 T. We also have achieved the 56 A of I$_{c}$ and 7.0 $0 kA/\textrm{cm}^2$ of$ J_{e}$ in short tapes at 77K, self-field, and 1$mutextrm{V}$/cm.

• 여성건강간호학회지
• /
• 제13권3호
• /
• pp.174-183
• /
• 2007

Purpose: The purpose of this study was to explore the process of cultivating energy in middle-aged women doing Dan Jeon Breathing and to develop a grounded theory of Dan Jeon Breathing. Method: Data was collected by means of an in-depth interview using tape- recordings from 15 participants who practice Dan Jeon Breathing. The data was analyzed using the grounded theory method proposed by Strauss and Corbin(1998). Results: The core category was identified as "cultivating energy of the mind and the body together". The process of this could be further divided into 4 stages: the stages are cessation of an 'energetic life', 'depending on Dan Jeon Breathing', 'going through a difficult practice process' and 'getting used to Dan Jeon Breathing'. The participants began Dan Jeon Breathing because they were unable to retain their energetic lifestyle. They were dependent on Dan Jeon Breathing for recovery of health. Also, they were going through a difficult process. Finally, they entirely approved of Dan Jeon Breathing as a method of health promotion. Conclusion: This study provided the understanding needed for the training process of Dan Jeon Breathing. Therefore, women can pursue Dan Jeon Breathing for their health.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.207-207
• /
• 2008

Modern industry has focused on processing that produce low- loss dielectric substrates used complex micron-sized devices using tick film technologies such as tape casting and slip casting. However, these processes have inherent disadvantages fabricating high density interconnect with embedded passives for high speed communication electronic devices. Here, we have successfully fabricated porous alumina dielectric layer infiltrated with polymer solution by using inkjet printing process. Alumina suspensions were formulated as dielectric ink that were optimized to use in inkjet process. The layer was confirmed by field emission scanning electron microscope (FE-SEM) for measuring microstructure and volume fraction. In addition, the reaction kinetics and electrical properties were characterized by FT-IR and the impedance analyzer. The volume fraction of alumina in porous dielectric alumina layer is around 70% much higher than that in the conventional process. Furthermore, after infiltration on the dielectric layer using polymer resins such as cyanate ester. Excellent Q factors of the dielectric is about 200 when confirmed by impedance analyzer without any high temperature process.

• 한국레이저가공학회지
• /
• 제8권2호
• /
• pp.21-32
• /
• 2005

The excimer laser ablation of a polymer occurs by the excitation of chemical bonds to energy levels that are above the dissociation energy. In this process, however, fragmented debris is finally ejected explosively by the scission of bonds and accumulates on the material surface. In the present work, a process for eliminating surface debris contamination generated by the laser ablation of a polymer is developed. The proposed approach for removing surface debris utilizes an erasable ink pasted on a polymide. The ink pasted polyimide is ablated by KrF excimer laser. The surface debris ejected from the polyimide is then combined with the ink layer on the polymer. Finally, both the surface debris and the ink layer are removed using adhesive tape or alcohol solvent. The results suggest that the erasable ink method is a simple, low cost, and extremely effective debris eliminating process.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.23-35
• /
• 1994

Efficient operation of a component placement machine with a multi-head in a PCB assembly process is considered. The problem consists of two subproblems, which are the optimal allocation of the component tape reels in the rack and the optimal mounting sequence of the components on a printed circuit board. We analyze the problem and propose a heuristic algorithm to solve it. The heuristic can be used for the one head case too. Computational experiences on some real world problems show the effectiveness of the heuristic in terms of speed and solution quality.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.182-182
• /
• 2009

The effect of Re-oxidation on the PTCR properties of Sm-doped barium titanate ceramics was investigated by means of impedance spectroscopy. Electrical properties such as resistance vs. temperature, I-V curve were measured and microstructure was observed with SEM photography. Sample was fabricated with thick film process such as tape casting of green sheet, screen printing of electrode pattern, stacking, firing in reduced atmosphere and re-oxidation, etc. As the temperature of re-oxidation increases, resistance jump as a function of temperature enhances but resistance at room temperature increases. These behavior of resistance as a function of temperature, dependent on the re-oxidation condition, is analyzed with Cole-Cole impedance plot and is shown to be related with the degree of oxidation of grain boundary regardless of grain core during re-oxidation process of sample.

• 한국레이저가공학회지
• /
• 제8권3호
• /
• pp.21-26
• /
• 2005

A bonding process between tape-carrier package and a glass panel with anisotropic conductive film (ACF) has been investigated by making use of high power diode laser as a heat source for cure. The results from modeling of process and from optical properties of layers showed that heat absorbed from polyimide film surface and ACF layer is dominant source of curing during laser illumination. Laser ACF bonding has better bonding quality than conventional bonding in view of peel strength, flatness, pressure unbalance and processing time. New ACF bonding processes by making use of high power diode laser are proposed.

• 한국세라믹학회지
• /
• 제35권3호
• /
• pp.264-272
• /
• 1998

The effect of catalytic condition on the properties of SiO2 aerogels has been investigated and then the dri-ed aerogels were partially densified to induce mechanical strength by heat treatment in order to prepare Type-VI silica by Sol-Gel method. Aerogel made by 1-step base process had the highest skeletal density lowest shrinkage and the smallest particle size. But in case of using acid catalyst in both 1st and 2nd step had the lowest skeletal density highest shrinkage and the largest particle size The aerogel synthesized by 1-step base process was most transparent because of its homogeneous microstructure. During heat treatments cracks occurred below 200$^{\circ}C$ for aerogel with the skeletal density lower than 1.9 g/cm3 but the with the higher skeletal density did not cracked up to 800$^{\circ}C$ shrinkage and skeletal density increased as heating temperature increased due to condensation and viscous sintering mechanism.

• 대한간호학회지
• /
• 제36권5호
• /
• pp.710-720
• /
• 2006

Purpose: The purpose of this study was to help understand the life and illness-experiences of focusing on a positive lifestyle, patients with Parkinson's disease, Method: The present study adopted a ethno graphic methodology. The participants for this study were 4 men and 3 women, who were treated for Parkinson's disease. Data was collected by an interview and participant observations from August 2003 to September 2004. Tape-recorded interviews were transcribed after the interview and classified and described to realistic tale. Result: Patients with Parkinson's disease experienced the stage of retake-off pursuing positive life by overcoming the acceptance process of illness including the stage of recognition of change, the stage of disruption and the stage of acceptance. The factors of positive life of Patients with Parkinson's disease were their strong will and social support. Conclusion: This study may be used in future studies as an important resource to develop nursing intervention strategies and programs for patients with Parkinson's disease that can help the patients to achieve strong willingness and positive life in Korea.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.198-201
• /
• 1996

In order to investigate control factors to critical current density, Ag sheathed Bi2223 superconducting tapes were fabricated using PIT process. Optimizing the reduction ratio of rolling, critical current density 7f rolled Bi2223 tape could be improved with the value of 15,000 A/$\textrm{cm}^2$(77 K, zero field). The correlation between J$\_$c/ and work inhomogeneity was revealed as a dependence of COV of measured oxide layer thickness.