• Journal of Construction Engineering and Project Management
• /
• v.2 no.4
• /
• pp.11-19
• /
• 2012

Construction supply chain management (CSCM) has become one of the critical factors that determine the success of a construction project as it becomes increasingly complicated and mega-sized. Particularly for high-rise or mega-sized building construction, just-in-time supply chain management is required due to lack of storage space and effective logistics for construction components and materials at a construction site. Despite the fact that research and development of radio frequency identification (RFID) and wireless sensor network (WSN) technology have been performed, construction project managers still need to carry mobile devices and check material and component flow at each stage of the supply chain process. This research proposes that the equipment used in the construction supply chain process, such as movers, trailers, gates, and hoists, can become main actors in the supply chain process using RFID and WSN technologies. And the proposed equipment and process focused on a solution to the redundancy identification problem, which has been observed in operations that use RFID/WSN-based processes for construction logistics. This paper also presents issues identified through verification and validation of the research results and proposes further studies.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1369-1382
• /
• 2007

To find proper water quality management strategy for oxygen consumption organic matters in Jinhae bay, the physical process and net supply/decomposition in terms of COD was estimated by three-dimensional eco-hydrodynamic modeling. The estimation results of physical process in terms of COD showed that transportation of COD was dominant in loading area from land to sea, while accumulation of COD was dominant in $middle{\sim}bottom$ level. In case of surface level, the net supply rate of COD was $0{\sim}60\;mg/m^2/day$. The net decomposition rate of COD was $0{\sim}-0.05\;mg/m^2/day$($-5{\sim}-10$ m, in depth) to 2 level, and $-0.05{\sim}-0.20\;mg/m^2/day(10m{\sim})$ to bottom level. These results indicate that the biological decomposition and physical accumulation of COD are occurred for the most part of Jinhae Bay bottom. The variation of net supply or net decomposition rate of COD as reducing land based input loading is also remarkable. Therefore, it is important to consider both allochthonous and autochthonous oxygen demanding organic matters to improve the water quality of Jinhae Bay.

• Journal of Information Technology Services
• /
• v.15 no.4
• /
• pp.175-191
• /
• 2016

This paper investigates changing processes of new product development (NPD) systems. In order to continuously develop first-class products, world wide super-class products and hit products, R&D (Research & Development) must be competitive. Firms must achieve competitiveness in terms of quality and cost by launching new products. Most films focus on improving effectiveness and efficiency of NPD process. However, sometimes, they face to the critical challenge of transforming NPD processes entirely reflecting dramatic change of their core products. Transforming of NPD process is difficult in that it involves technological and organizational changes in marketing, R&D, Engineering and manufacturing systems. The purpose of this paper is to shed light on processes and factors affecting successful transformation of new product development systems. We present a case study on the changing processes of S company's NPD process. S company has changed new product development systems successfully from a major IT equipment supplier to an automotive supplier. Empirical results show successful changes of 10 core NPD processes from understanding the market and customers process to after sales process. In case of transformation of NPD, adaption of attribute of business is crucial for success factors in the process innovation. This paper shows the bridging the gap between IT and automotive industrial dynamics and growth through adaption of two processes in the NPD.

• Journal of Korean Society for Quality Management
• /
• v.42 no.2
• /
• pp.145-152
• /
• 2014

Purpose: As the number of people directly employed in making things declines, the cost of labour as a proportion of the cost of production and delivery will diminish too. This will make to move the focus of quality management because new manufacturing techniques make it cheaper and faster to respond to changing local tastes Methods: This discussion is induced by understanding that change the point of view of quality. Results: Mark-processing method using a mold of 3D-printer is different from traditional manufacturing methods. Design, rapid prototyping of products produced by the right way, many changes in many industries will be created. Therefore, the design will be more emphasis on the importance of quality. Conclusion: As manufacturing goes digital, a Quality great change is now gathering pace. It will allow things to be made economically in much smaller numbers, more flexibly and with a much lower input of labour, thanks to new materials, completely new processes such as 3D printing. So we must change the vantage point of quality, from process to Design, R&D, and Delivery.

• Journal of East Asia Management
• /
• v.3 no.2
• /
• pp.43-64
• /
• 2022

Exploring innovations for latecomers to catch up has been a popular concern in industry and academia. Over the last decade, more and more East Asian latecomer firms have moved beyond imitation and are delivering innovative products and services to the market. However, the semiconductor latecomers from China have limited success in catching up with more mature semiconductor firms. Our study examines how semiconductor latecomers to break through the latecomer's dilemma by innovation and achieve catch-up. We use a single-case approach for the Semiconductor Manufacturing International Corporation (SMIC) vertical development process to analysis its innovation path of catching up. The study's results showed that SMIC relied on the government's policy and funding support, and based on the strategic endurance of entrepreneurs, it persisted in technology R&D investment and independent innovation for 20 years. SMIC finally smashed the dilemma of latecomers and successfully achieved catch-up. With these findings, we believe that the path of catching up innovation for semiconductor latecomers should be equipped with independent innovation of technology, strategic leadership of entrepreneurs and support of government policies. As these factors are combined, latecomer firms' position is expected to rise and catch-up will become visible. Our study contributes to some enlightenment on the innovation path for latecomers in China and global semiconductors to achieve their catch-up.

• Journal of Environmental Health Sciences
• /
• v.44 no.5
• /
• pp.421-432
• /
• 2018

Objectives: In this study, we started to develop an indoor garden integrated IoT solution based on IAQ (indoor air quality) and interconnection with an environmental database for smart management of indoor gardens. The purpose of this study was to develop and apply an integrated solution for customized air purification from an indoor garden through big data analysis using IoT technology. Methods: An IoT-based IAQ monitoring system was established in three households within a new apartment building. Based on real-time and long-term data collected, $PM_{2.5}$, $CO_2$, temperature, and humidity changes were compared to those of indoor garden applications and the analyzed results were indexed. Results As a result of the installation, all three households had no results exceeding the standard for indoor air pollution on average $PM_{2.5}$ and $CO_2$ indices. In the case of indoor garden installation, the IAQ index increased to the "Good" section after the installation, and readings in the "Bad" section shown before the installation disappeared. The comfort index also did not dip into the "Uncomfortable" section, where it had been preinstallation, and significantly lowered the average score from "Uncomfortable for sensitive groups" to "Good". Overall, the IAQ composite index for the generation of installations decreased the "Good" interval, but "Bad" did not appear. Conclusions In this study on developing an integrated solution for IAQ based on IoT indoor gardens, big data was analyzed to determine IAQ and comfort indexes and an IAQ composite index. Through this process, it became understood that it is necessary to monitor IAQ based on IoT.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.6
• /
• pp.546-551
• /
• 2004

The study was focused on setting priority for future core technologies in crops using Analytic Hierarchy Process (ARP). The technologies were derived by Delphi method. Evaluation criteria for the priority setting were decided as 'technology', 'market oriented', and 'public concerns' by council. The future core technologies were divided as four groups by importance and R&D level. Technologies in upper two groups were considered in the study. Group I had high importance and high R&D level. Group II had high importance and lower R&D level. Questionnaires were given to 8 specialists in crops. As the results, 'public concerns' was decided as the most important evaluation criterion. The most important technologies are 'developing of growing technology that has low inputs and production cost for environmental friendly agriculture' in group I, and 'developing of gene searching, characteristics transformation, and commercialization technologies for crops using bio-technology' in group II.

• Environmental Engineering Research
• /
• v.19 no.2
• /
• pp.117-122
• /
• 2014

Indexes of safety, restoration, damage impact, and management reliability were developed to assess reliability of drinking water distribution networks (DWDNs) management. The developed indexes were applied to evaluate the reliability of the pipeline management stage during unexpected mechanical and hydraulic accidents of components. The results were used to support the decision-making process in effective management and maintenance by enhancing the administrator's system understanding and by helping to create appropriate maintenance and management policies. The results of this study indicated that application of a management reliability index to assess DWDNs reliability may help create a more effective plan for establishing DWDNs management and maintenance.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.115-123
• /
• 2014

Patent information analysis has been carried out for technological capability analysis of competitors relating to next generation mobile communication. Various analysis methods, such as applicant analysis, technology classification analysis, indicator analysis and the like have been utilized as a method of analyzing patent information. As a first step for the technological capability analysis of competitors, applicants having high patent activity(PA) were selected, and as a second step therefor, technology classifications showing high technological independence (TI) were selected. Furthermore, portfolios for technology classifications showing high technological independence in the patents of main applicants having high patent activity by matching results the first and second steps together were prepared. Through such a process, portfolios for important technologies which have been concentrically researched by competitors could be analyzed. Accordingly, the present analysis results will help to carry out strategic R&D management, such as the establishment of company R&D plans and patent strategies.

• Journal of Ginseng Research
• /
• v.45 no.4
• /
• pp.527-534
• /
• 2021

Background: Phenological studies are a prerequisite for accomplishing higher productivity and better crop quality in cultivated plants. However, there are no phenological studies on Panax ginseng that improve its production yield. This study aims to redefine the phenological growth stages of P. ginseng based on the existing Biologische Bundesanstalt, Bundessortenamt und Chemische Industrie (BBCH) scale and proposes a disease control reference. Methods: This study was conducted at the Korea Ginseng Corporation Experiment Station in Gyeonggi province, South Korea. Phenological observations were performed once weekly or twice monthly, based on the developmental stages. The existing BBCH scale with a three-digit code was used to redefine and update P. ginseng's phenological growth codes. Results: The phenological description is divided into eight principal growth stages: three for vegetative growth (perennating bud, aerial shoot, and root development), four for reproductive growth (reproductive organ development, flowering, fruit development, and fruit maturation), and one for senescence according to the extended BBCH scale. A total of 58 secondary growth stages were described within the eight principal growth stages. Under each secondary growth stage, four mesostages are also taken into account, which contains the distinct patterns of the phenological characteristics in ginseng varieties and the process of transplanting seedlings. A practical management program for disease control was also proposed by using the BBCH code and the phenological data proposed in this work. Conclusion: The study introduces an extended BBCH scale for the phenological research of P. ginseng.