• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.101-107
• /
• 2009

Growth in the VLSI process and design technology is resulting into a continuous increase in the number of IPs on a chip to form a system. Because of many IPs on a single chip, efficient communication between IPs is essential. We propose a dynamically reconfigurable 3-layer bus structure which can adapt to the pattern of data transmission to achieve an efficient data communication between various IPs. The proposed 3-layer bus can be reconfigured to multi-single bus mode, and single-multi bus mode, thus providing the benefits of both single-bus and multi-bus modes. Experimental results show that the flexibility of the proposed bus structure can reduce data transmission time compared to the conventional fixed bus structure. We incorporated the proposed bus structure in a JPEG system and verified that the proposed structure achieved an average of 22% improvement in time over the conventional fixed bus structure.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.169-174
• /
• 2011

This paper provides Bus Information System(BIS) implementation based on the Smart-phone APPs using GPS information. Nearly all of recent smart-phones are equipped with the GPS feature. Bus driver's smart-phone can send the position information using its GPS information periodically and on events. On receiving those information, servers can process those into the information that can be used by individual users and bus stop information panel. The proposed BIS based on smart-phone APPs is expected to be used publicly with the special process that enables the smart-phone APPs only in the specific bus.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.662_663
• /
• 2009

Motor bus transfer involves the process of transferring a bus that has several critical motors to an alternate source of power when the main normal power source feeding them is interrupted. Bus transfer is a time-critical application in which the transfer progress depends on various parameters such as the type of motor, load on the motor at the time of transfer, inertia of the motor, and the combined open-circuit time constant of various motors present on the bus at the time of transfer. This paper present the result of modeling and simulation of nuclear power motor bus using ETAP(Electrical Transient Analyzing Program) program for motor and motor bus residual voltage decay characteristics.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.968-969
• /
• 2015

This paper proposes a novel analysis method for calculating inverter DC bus capacitance and line reactor parameters. In the realization process, DC bus capacitance parameter, and ripple current, life of DC bus capacitor, interaction between DC bus capacitance can be calculated by using Newton-Raphson procedure. The design scheme of DC bus capacitor and line reactor, specific parameters such as capacitance, loss, ripple current, central average temperature, life, ripple current, loss, size, central temperature of the reactor were given. Simulation results show that this scheme can accurately calculate the DC bus capacitance and line reactor parameters. Compared with calculation result of references, cost and volume are half. The indicators meet the demand of practical engineering. It had affirmed precision of the analytical method and verified correctness and feasibility of this method.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.4
• /
• pp.355-361
• /
• 2009

In this paper, an analysis technique is presented for performing the effective design of bus structure. Sensitivity analysis is carried out for the natural frequency of component structures consisting of bus B.I.W. Local vibration modes of substructure, which large affect on the global vibration mode of the bus B.I.W., are obtained through the sensitivity analysis technique using the mathematical chain rule. And also the design variables, which are determined from the sensitivity analysis, are redesigned through optimum design process. The proposed analysis technique shows that the bus structure can be effectively designed considering the vibration characteristics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.587-595
• /
• 2008

Many studies on bus scheduling optimization have been done from the 1960s to recent years for establishing rational bus schedule plan that can improve convenience of bus passengers and minimize unnecessary runs. After 2000, as part of the Intelligent Transport Systems (ITS), the importance of the schedule management and providing schedule information through bus schedule optimization has become a big issue, and much research is being done to develop optimization models that will increase bus passenger convenience and, on the side of bus management, minimize unnecessary bus operation. The purpose of this study is to calculate the optimal bus frequency and create a timetable for each bus stop by applying DTR or DTRC model that use data for each bus stop and route segment. Model verification process was implemented using data collected from bus management system (BMS) and integrated transit-fare card system for bus route of Seoul's No. 472 line. In order to evaluate the reliability and uncertainty of optimal solution, sensitivity analysis was implemented for the various parameters and assumptions used in the bus scheduling model.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.201-205
• /
• 2001

This paper presents the load modeling process and bus load models for KEPCO power system. At first, load devices commonly used in KEPCO power systems were selected, and tested for measuring the voltage and frequency sensitivity of active and reactive power. From this test, about 40 voltage and frequency dependent load models have been obtained. The bus load composition rate for KEPCO power system has been determined using the various recent surveys and papers in order to develop the load model for a power system bus. To verify the accuracy of developed bus load models, the field test for measuring active and reactive power according to artificial variation of the bus voltage was performed at 8 substations for spring summer, autumn, winter cases. With data of this seasonal field test, more reliable bus load models for KEPCO power systems were developed.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.135-141
• /
• 2013

PURPOSES: In this study, as part of an effort to develop HUD for public transit, it is proposed that the decision of order priority of contents which will be disposed to bus drivers through HUD for public transit using AHP(Analytic Hierarchy Process) technique. METHODS: In AHP analysis method brainstorming, factor analysis, hierarchical structuring, and weighting analysis were performed by applying a classical analysis method. RESULTS: By the result of analysis it is shown that unlike car drivers, bus drivers prefer information related to bus intervals, bus stop, and door open and close to information related to vehicle running. Also, bus stop information and bus interval information were ranked as first and second place in order priority of HUD contents for public transit by experts. CONCLUSIONS: This method of selecting order priority of HUD contents for public transit can provide a basic foundation for selecting order priority of traffic information contents as well as other HUD contents.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.105-111
• /
• 2007

The type of pedestrian accident can be characterized by vehicular frontal shape and the height of pedestrian. The trajectory of pedestrian after collision by passenger car is different from that by bus due to vehicular frontal shape. The frontal shape of SUV vehicles is dissimilar to passenger car and bus. So, the trajectory and throw distance of pedestrian by SUV vehicles is not the same of passenger car and bus. In this paper, a series of pedestrian kinetic simulation were conducted to inspect the difference in throw distance between SUV vehicle and passenger car and bus by PC-CRASH that is the program for kinetic analysis of articulated body. From the results, if the height of pedestrian is taller than 1.70m, there is no difference in throw distance between SUV vehicle and passenger car, but if the height of pedestrian is about 1.55m throw distance of SUV vehicle is about 4m longer than that of passenger car at each impact speed. The throw distance of pedestrian by Bus is shorter than that of passenger car and SUV at each impact speed.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.447-455
• /
• 2009

The power supply systems, which require low-voltage / high-current output has been changing from the conventional centralized power system to a distributed power system. The distributed power system consists of a bus converter and POL. The most important factor is the system stability in bus architecture design. The overlap between the output impedance of a bus converter input impedance of POL causes system instability and has been an actual problem. By increasing the bus capacitor, the system stability can be easily improved. However, due to limited space on the system board, the increasing of bus capacitors is impractical. An urgent solution of this issue is strongly desired. This paper presents the output impedance design for on-board distributed power system by means of three control schemes of a bus converter. The output impedance peak of the bus converter and the input impedance of the POL are analyzed and then conformed experimentally for stability criterion. Furthermore, the design process of each control schemes for system stability is proposed.