• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.3
• /
• pp.22-35
• /
• 2003

This paper describes system technical requirement development process from operational concept using computer-aided Systems Engineering tool(CASysE Tool-CORE). The army tactical missile system-ATACMS's technical requirements are developed by the process as a case-study The scope of the work is context analysis and requirement definition process. The proposed process is as follows. At first, an integrated architecture could be developed from the operational concept. From the integrated architecture a capability needs, which includes KPPs, are generated. And the capability needs expanded according to the Mil-Std-961D format. Lastly, a system technical requirement could be generated automatically from the CASysE Tool-CORE.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.399-402
• /
• 2006

The outer race of CV(constant velocity) joint is an important load-supporting automotive part, which transmits torque between the transmission gear box and driving wheel. The outer race is difficult to forge because its shape is very complicated and the required dimensional tolerances are very small. Traditional warm and cold forging methods have their own limitations to produce such a complex shaped part; warm forging requires complex system with relatively higher manufacturing cost, while cold forging is not applicable to materials with limited formability. Therefore, multistage forging may be advantageous to produce complex shaped parts. In order to build a multistage forging system, it is necessary to characterize mechanical properties in response to system design parameters such as temperature, forging speed and reduction. For the analysis of formability of multistage forging process, finite element method(FEM) has been used for the process analysis. As a model case, a constant velocity (CV) joint forging process is analyzed by FEM, since CV joint has a complex shape and also its required dimensional tolerances are very tight. The data acquired by FEM is compared with operational forging data obtained from an industrial production line. Based on this comparative analysis, multistage forging process for CV joints is proposed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.1-8
• /
• 2019

In this study, we design the feed system and process conditions for a lamp garnish lens of an automobile. For this purpose, four design alternatives are presented and injection molding simulation analyses are performed. The optimal feed system is selected by considering the formability of the product and the cost of mold manufacture. The product formability is assessed by the weld line, warpage, sink mark and the maximum injection pressure, whereas the mold-making cost is estimated by the number of valve gates in the hot runner system. To improve the product formability, process conditions are optimized using an experimental design approach named one-factor-at-a-time. No weld line is generated as a result of the optimization. In addition, it is found the warpage and sink mark are reduced while the maximum injection pressure is increased, compared with those before the optimization.

• IE interfaces
• /
• v.5 no.1
• /
• pp.35-46
• /
• 1992

This paper deals with analysis of material handling system efficiency of a heat-exchanger manufacturing line. This line is a typical flow shop type assembly line which consists of 10 steps of assembly stations. Each station have one or two workers who assemble and move components for the job, and no special transporters for component's movement. Therfore, all the workers are involoved in unnecessary moving activities which decrease overall production efficiencies of the line. To improve productivities, production outputs and worker's job performances for this assembly line, the several alternatives are considered such as installing new conveyor lines and automatic guided vehicle(AGV) system. Analyzing economic feasibilities and responses of the system alternatives, an experimental simulation model is built suing SIMAN Ver. 3. 5 simulation language with CINEMA package for animation of the process flow. Through this animation process a vivid picturial analysis could performed on the process flow.

• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.193-200
• /
• 2006

Any design process is interwoven with numerous intermediate design representations and information. On the other hand, designers proceed the design through various activities. It has always been a difficult task to model the design process, yet there are many significant research outputs that explain the design process through the cognitive approaches. This research started from the necessity of an interactive system which externalize the elements of design process in a visual or tangible manner. In order to do so, a design model, specifically a design process representation model was necessary to capture and represent design process. Several concepts such as design issue, design concept, and design form were defined through the empirical studies of design practices. The assumption is that the design process can be effectively captured by the presented system and it can help both designers and tutors review and analyze the design process. It should also help novice designers learn from expert designer's design process patterns. The system represents design process pattern in a interactive graphic environment. It also provides various useful features to enhance the analysis of design process. This paper presents theoretical groundwork and development process of the design process visualizer. The representation model is presented, and the application of the system is reviewed. Discussions on the further development directions include critical evaluation of the system.

• 한국IT서비스학회:학술대회논문집
• /
• 2006.11a
• /
• pp.240-247
• /
• 2006

We assess service delivery system for outpatients of general hospital(A) using. service blueprint. Service blueprint for outpatients' service process currently being implemented in general hospital(A) is analysed to improve hospital services and define hospital service delivery system more accurately. In addition, comparative analysis of service blueprint before and after improvement was conducted to find that health care services is now more customer-oriented and hospital employees can link their duties with service delivery system. The analysis of service blueprint of outpatients' service process suggested in this study are useful for setting strategies for health care service. It also helps service process design and service digitalization of other general hospitals in the future.

• Journal of Aerospace System Engineering
• /
• v.8 no.4
• /
• pp.39-43
• /
• 2014

This paper examines the statistical process that should be performed with caution in the composite material qualification and equivalency process, and describes statistically significant considerations on outlier finding and handling process, data pooling through normalization process, review for data distributions and design allowables determination process for structural analysis. Based on these considerations, the need for guidance on statistical process for aircraft manufacturers who use the composite material properties database are proposed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.557-562
• /
• 2009

Weapon system currently considers the research about effect analysis including cost effectiveness methodology for a budget management and an achievement of the military strategy goal. So that, this study considers the theoretical background, strength and weakness of several Multi-Criteria Decision Making, and an effect analysis of weapon system. And AHP(Analytic Hierarchy Process) is selected for the best effect analysis methodology of weapon system. Therefore, we applied AHP to the case study of the new generation Multiple Launcher Rocket System, performing the analysis of cost effectiveness methodology. Using AHP and cost effectiveness methodology, we propose the actual and proper decision making result.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.17-22
• /
• 2021

The shape of the blank greatly affects the formability and quality of the product after the stamping process. In this study, the geometry of the B-Pillar blank in the stamping process was optimized using design of experiments. The geometry of the blank for the B-pillar was simplified with the two length values and two radius values. The effects of design variables were studied through the Design of experiments. The stamping process of the B-pillar was predicted with the Finite Element Analysis (FEA). The optimized blank geometry was obtained. It results in the reduced maximum equivalent plastic strain. The local necking and the wrinkling did not occurred with the optimized blank geometry.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.1
• /
• pp.59-66
• /
• 2011

This work treat the modeling and simulation of non-linear dynamic behavior of a web winding process during traction. We designate by a winding process any system applying the cycles of unwinding, transport, treatment, and winding to various flat products. This system knows several constraints, such as the thermal effects caused by the frictions, and the mechanical effects provoked by metal elongation, that generates dysfunctions due to the influence of the process conditions. Several controllers are considered, including Proportional-integral (PI) and Backstepping control. This paper presents the study of Backstepping controls strategy of the winding system. Our winding system is simulated in MATLAB SIMULINK environment, the results obtained illustrate the efficiency of the proposed control with no overshoot, and the rising time is improved with good disturbances rejections comparing with the classical control law.