• Food Science of Animal Resources
• /
• v.35 no.4
• /
• pp.431-440
• /
• 2015

Chicken bone is not adequately utilized despite its high nutritional value and protein content. Although not a common raw material, chicken bone can be used in many different ways besides manufacturing of collagen products. In this study, a multi-step procedure was optimized to isolate chicken bone collagen for higher yield and quality for manufacture of collagen products. The chemical composition of chicken bone was 2.9% nitrogen corresponding to about 15.6% protein, 9.5% fat, 14.7% mineral and 57.5% moisture. The lowest amount of protein loss was aimed along with the separation of the highest amount of visible impurities, non-collagen proteins, minerals and fats. Treatments under optimum conditions removed 57.1% of fats and 87.5% of minerals with respect to their initial concentrations. Meanwhile, 18.6% of protein and 14.9% of hydroxyproline were lost, suggesting that a selective separation of non-collagen components and isolation of collagen were achieved. A significant part of impurities were selectively removed and over 80% of the original collagen was preserved during the treatments.

• Ocean and Polar Research
• /
• v.33 no.2
• /
• pp.171-183
• /
• 2011

Despite technological developments and application advances of Acoustic Doppler Current Profilers (ADCPs), no standard procedure has been adopted or accepted for calibration of ADCPs. Limitations of existing facilities for calibrating ADCPs, the complexity of ADCP instruments, and rapid changes in ADCP technology are some of the reasons why a standard procedure has not been adopted. However, there is increasing realization of the need for effective Quality Assurance (QA) and as part of that the importance of standardized calibration. In this study, the significance of calibration and QA plans for ADCPs is discussed and the calibration facilities for ADCPs at home and abroad are reported. Furthermore, the method for calibrating ADCPs using a towed car and its limitations are discussed. This study contributes to discussions surrounding the establishment of standard procedures for calibrating ADCPs and QA plans, and the construction of calibration facilities in the future.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.244-246
• /
• 2006

Softwares in railway system are being used in the area of railway control system, directly associated to safety. Because the instinct characteristic of Software is uncertainty, Software development without safety insurance is very hazardous situation. In order to derive safety certification process in the railway system, certification and approval processes in the nuclear, aviation, and military area are studied. Software quality should be improved by two aspects : one is product aspect, another is process aspect. GS(Good Software) and ES(Excellent Software) certification can be exemplified in a product aspect approach. In those process certification, CMMI (Capability Maturity Model Integration) or SPICE (Software Process Improvement and Capability dEtermination : ISO/IEC15504) is being used as models for assessing process maturity of organization. Following the studies, safety management procedure in the railway system is suggested.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.3
• /
• pp.25-35
• /
• 1993

Economic screening procedures using a correlated variable are proposed to assure that the proportion of conforming items is above a desired level after screening. It is assumed that the performance variable and the screening variable are jointly normally distributed. Two screening procedures are considered. In the first screening procedure, all of the items are inspected on the screening variable. If an item fails to meet the screening specifications, it is rejected and excluded from shipment without inspection of the performance variable. In the second screening procedure, the item which fails to meet the screening specifications is inspected on the performance variable. If the value of the performance variable is within specifications the item is accepted, and the item is rejected otherwise. Cost models are constructed which involve cast from an accepted nonconforming item, cost from a rejected item, and quality inspection cost. Methods of finding optimal cutoff value on a screening variable are presented and numerical examples are given.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.348-357
• /
• 2013

This work describes an approach that contributes to derive from mission to critical functions of the attack helicopter under future battle space environment. An existing mission of the attack helicopter is limited to the only shooter oriented functions. In the future environment, mission and its functions of the helicopter might be much expanded. The functions should be derived by the top down approach based on systems engineering approach. In this point of view, this work describes network based future battle environment. From this environment, the missions of the attack helicopter are identified and optimized functions are derived through sequential procedures like from missions to tasks, tasks to activities, and activities to functions. The selected activities are obtained from the tasks using QFD. The weighting scores of the QFD are calculated by the AHP computational procedure. Finally the critical functions are presented through the similar procedure.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.4
• /
• pp.31-36
• /
• 2002

A continuous tool-path, that is to cut continuously with the minimum number of cutter retractions during the cutting operations, is developed in order to minimise the fluctuation of cutting load and the possibility of chipping on the cutting edge in HSM (high-speed machining). This algorithm begins with the offset procedure along the boundary curve of the sculptured surface being machined. In the of offset procedure, the offset distance is determined such that the scallop height maintains a constant roughness to ensure higher levels of efficiency and quality in high-speed machining. Then, the continuous path is generated as a kind of the diagonal curve between the offset curves. This path strategy is able to connect to neighbor paths without cutter retractions. Therefore, the minimum tool retraction tool-path can be generated And, it allows the sculptured surface incorporating both steep and flat areas to be high-speed machined.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.4
• /
• pp.29-42
• /
• 2005

The passenger security screening is a mandatory procedure for boarding the aircraft according to ICAO standard as well as national law of each country. The enhanced threat of terrorism have had the security procedure strengthened since 9/11 events. However the effectiveness of passenger screening is not satisfactory and the service level for passenger is getting worse because of tightened security measurements. This research studied the responsibility issue for the enhancement of the effectiveness and service quality in passenger security screening. The study concluded that a desirable responsibility assignment for passenger screening is to the airport authority at normal time and to the government authority at the time of high threat.

• IE interfaces
• /
• v.16 no.2
• /
• pp.174-184
• /
• 2003

This paper addresses a fleet operation planning problem for a static freight container transportation system in which all the transportation requirements are predetermined at the beginning of a planning horizon. In the transportation system under consideration, a number of loaded containers are to be moved between container storage yards. An optimal fleet planning model is used to determine the minimum number of vehicles required. Based on the results from the optimal model, a tabu-search based algorithm is presented to perform a given transportation requirements with the least number of vehicles. The performance of the new procedure is evaluated through some experiments in comparison with two existing methods, and the it is found that our procedure produces good-quality solutions.

• Structural Engineering and Mechanics
• /
• v.46 no.3
• /
• pp.433-445
• /
• 2013

Vibration-based structural identification has become an important tool for structural health monitoring and safety evaluation. However, various kinds of uncertainties (e.g., observation noise) involved in the field test data obstruct automation system identification for accurate and fast structural safety evaluation. A practical way including a data preprocessing procedure and a vector backward auto-regressive (VBAR) method has been investigated for practical bridge identification. The data preprocessing procedure serves to improve the data quality, which consists of multi-level uncertainty mitigation techniques. The VBAR method provides a determinative way to automatically distinguish structural modes from extraneous modes arising from uncertainty. Ambient test data of a cantilever beam is investigated to demonstrate how the proposed method automatically interprets vibration data for structural modal estimation. Especially, structural identification of a truss bridge using field test data is also performed to study the effectiveness of the proposed method for real bridge identification.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.349-354
• /
• 2002

Stud penetrate welding is an important item of composite floor in modern steel structure, especially in high-rise buildings. But it is difficult to get satisfied welding quality due to all kinds of factors. In this paper, the author put forward a new welding procedure named method of energy control through analysis and comparison of the wave curves of stud welding based on large amount of experiments and tests in laboratory and construction areas. The use of this welding procedure in some large engineering in recent years proved that this method is effective and practicable