• The Journal of Korean Society for Radiation Therapy
• /
• v.11 no.1
• /
• pp.16-21
• /
• 1999

Purpose : The aim of this study is to conform the possibility of the liquid type EPID as a QC tools to clinical indication and of replacement of the film dosimetry. Aditional aim is to describe a procedure for the use of a EPID as a physics calibration tool in the measurements of radiation beam parameters which are typically carried out with film. Method & Materials : In this study we used the Clinac 2100c/d with EPID. This system contains 65536 liquid-filled ion chambers arranged in a $256{\times}256$ matrix and the imaging area is $32.5{\times}32.5cm$ with liquid layer thickness of 1mm. The EPID was tested for different field sizes under typical clinical conditions and pixel values were calibrated against dose by producing images using various thickness of lead attenuators(lead step wedge) using 6 & 10MV x-ray. We placed various thickness of lead on the table of linear accelerator and set the portal vision an SDD of 100cm. To acquire portal image we change the field size and energy, and we recorded the average pixel value in a $3{\times}3$ pixel region of interest(ROI) at field center was recorded. The pixel values were also measured for different field sizes in order to evaluate the dependence of pixel value on x-ray energy spectrum and various scatter components. Result : The EPID, as a whole, was useful as a QA tool and dosimetry device. In mechanical check, cross-hair centering was well matched and the error was less than ?2mm and light/radiation field coincidence was less than 1mm also. In portal dosimetry the wider the field size the the higher the pixel value and as the lead thickness increase, the pixel value was exponentially decreased. Conclusions : The EPID was very suitable for QA tools and it can be used to measure exit dose during patients treatment with reasonable accuracy. But when indicate the EPID to clincal study deep consideration required

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.1
• /
• pp.19-27
• /
• 2014

Kompsat-3 is an optical high-resolution earth observation satellite launched in May 2012. In addition to its 0.7m spatial resolution, Kompsat-3 is capable of in-track stereo acquisition enabling quality Digital Elevation Model(DEM) generation. Typical DEM generation procedure requires accurate control points well-distributed over the entire image region. But we often face difficult situations especially when the area of interests is oversea or inaccessible area. One solution to this is to use existing geospatial data even though they only cover a part of the image. This paper aimed to assess accuracy of DEM from Kompsat-3 with different scenarios including no control point, Rational Polynomial Coefficients(RPC) relative adjustment, and RPC adjustment with control points. Experiments were carried out for Kompsat-3 stereo data in USA. We used Digital Orthophoto Quadrangle(DOQ) and Shuttle Radar Topography Mission(SRTM) as control points sources. The generated DEMs are compared to a LiDAR DEM for accuracy assessment. The test results showed that the relative RPC adjustment significantly improved DEM accuracy without any control point. And comparable DEM could be derived from single control point from DOQ and SRTM, showing 7 meters of mean elevation error.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.490-499
• /
• 2017

In recent years, the introduction of complex systems analysis based on various variables has become more active in order to identify and analyze complex problems of Modern Society. Prediction of patients' spatial perception and usability according to the spatial arrangement of the outpatient department is a very important factor for providing high quality hospital service. For objective analysis, the standard program procedure and analysis index for the diseases of the elderly were prepared and the uniformity of the atmospheric space was evaluated through heat map analysis and quantitative analysis. In this study, 73 cells were installed and simulated to analyze the uniformity of the four alternatives according to the change of the arrangement of the medical care space, receiving space, and consultation space using the complex system analysis method for the nursing hospitals. The resulting density was derived. The results are as follows. 1)The layout of the reception space has the greatest influence on the total spatial density of the waiting space. 2) The uniformity of the waiting space can be increased by separating the examination space and the examination space. 3)The closer the location of the receiving space is from the entrance, the greater the density of the waiting space. Finally, this study applied discrete event simulation to the evaluation of uniformity of atmosphere space, and proved that the actor - based model can be utilized for utilization and evaluation as spatial analysis methodology.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.2
• /
• pp.195-205
• /
• 2002

Crew scheduling is the problem of pairing crews with each of the vehicles in operation during a certain period of time. A typical procedure of crew schedule optimization consists of enumerating all possible pairings and then selecting the subset which can cover all the operating vehicles, with the goal of minimizing the number of pairings in the subset. The linear programming approach popularly adopted for optimal selection of pairings, however, is not applicable when the objective function cannot be expressed in a linear form. This paper proposes a method of integrating integer programming and heuristic search to solve difficult crew scheduling problems in which the objective function cannot be expressed in linear form and at the same time the number of crews available is limited. The role of heuristic search is to improve the incomplete solution generated by integer programming through iterative repair. Experimental results show that our method outperforms human experts in terms of both solution quality and execution time when applied to real world crew scheduling Problems which can hardly be solved by traditional methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.357-366
• /
• 2016

This study evaluated the standardization of the outpatient management process in several regions of South Korea. The hospital workers in the administration department of the different medical institutions that are registered with the Korean Hospital Association were surveyed. These institutions can be standard hospitals or hospitals greater in size. A summary of the research results are as follows. There was no significant correlation in their registration procedures in relation to the institution's founder, number of sickbeds, number of staff employed in the administration department, and average number of outpatients per day. On the other hand, the prepayment of medical fees occurred more frequently when the number of sickbeds was larger. In addition, there was no large difference in their appointment procedures in relation to those features. Nevertheless, the prepayment of medical fees accounted for 11.8 % of the entire payment in institutions with less than five hundred beds, while fifty percent of the payment was made in advance in larger institutions with five hundred or more beds. From this research, there was only a small difference among the institutions' outpatient management, but a notable difference was observed in their electronic data processing systems and facilities. Therefore, more financial support should be generated for the implementation of a more integrated process. As a follow-up study, to provide patients with quality medical services, it will be necessary to apply the standardized procedure to an actual medical institution and analyze the expected effect.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.527-539
• /
• 2001

The wireless asynchronous transfer mode (ATM) system has the advantage of providing the broadband services with various quality-of-service requirements to the mobile terminal efficiently by utilizing the ATM technology developed for the wired ATM system. The available bit rate (ABR) service among various ATM services utilizes the available bandwidth remaining in the ATM link, which allows the efficient bandwidth usage. During the handoff of the mobile terminal, however, the queue length in the access point (AP) which resides in the boundary of the wired ATM network and the wireless ATM network may increase abruptly. In this paper, we propose a scheme which prevents the buffer-overflow and buffer-underflow in the AP during the handoff of the wireless ABR connection in the wireless ATM system using binary feedback rate-based ABR traffic control. This scheme controls the source's cell generation rate during both handoff period and some time interval after the completion of the handoff procedure. The simulation results show that the proposed scheme prevents the buffer-overflow and buffer-underflow. The proposed scheme can contribute to increasing the throughput of the wireless ABR service during handoff by preventing the buffer overflow and underflow during handoff period.

• Journal of the Korean Society for information Management
• /
• v.34 no.1
• /
• pp.341-371
• /
• 2017

Recently, the web service environment has changed from document-centered to data-oriented focus, and the Linked Open Data (LOD) exists at the core of the new environment. Specific procedures and methods were examined to build the LOD of records information in accordance with this trend. With the service sustainability of small-scale archive in consideration, an exemplification on LOD building process by utilizing open source software was developed in this paper. To this end, a 5-step service framework for LOD construction was proposed and applied to a collection of diary records from 'Human and Memory Archive'. Proof of Concept (POC) utilizing open source softwares, Protege and Apache Jena Fuseki, was conducted according to the proposed 5 step framework. After establishing the LOD of record information by utilizing the open source software, the connection with external LOD through interlinking and SPARQL search has been successfully performed. In addition, archives' considerations for LOD construction, including improvement on the quality of content information, the role of the archivist, were suggested based on the understanding obtained through the LOD construction process of records information.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1383-1388
• /
• 2011

Due to many recent activities on enforcement of the intensified environmental regulation such as the policies of curbing the greenhouse gas and the Restriction of Hazardous Substances (RoHS), the usage of Light emitting diode (LED) has been rapidly increased and energy efficient management of LED light system is regarded as an important technology to enhance the energy efficiency. In this paper, we propose an energy-efficient control scheme of LED light, being composed of multiple light sources. The proposed scheme controls the intensity of LED light source to minimize the total intensity while providing the quality of lighting service. The intensity of light is assumed to be proportional to power consumption, thus the objective is to minimize the total power consumption. A linear programming problem is formulated to find the optimal intensity of each light source and procedure to apply the proposed scheme in the real system is suggested. The performance evaluation results elucidate that the proposed scheme achieves over 20% improvement in power consumption of light intensity in comparison with the conventional dimming control scheme.

• Hwankyungkyoyuk
• /
• v.9 no.1
• /
• pp.39-57
• /
• 1996

All kinds of environmental problems are related to each local and geographical environment. For this reason, it is necessary for schools in each region to provide environmental education which suits the geographical character of their particular region. In order to provide solutions to the environmental problems of each school's geographic region, the goal of this research is as follows: 1. We can make students realize the relationship between the human race and the environment by teaching according to the environmental conditions in each local area. 2. By teaching students about the problems in their own local environment, we can increase their concern about the state of their local surroundings. 3. When teaching about the environment, it is useful to use educational material which suits the character of each local region. 4. Students' interest in environmental preservation can be aroused through extracurricular environmental activities. The ares concerned are Chonnam and Kwangju City, which are divided into urban, industrial, rural, coastal, and mountainous areas. The conclusion about considering environmental education in environmental school social studies is as follows: 1. Kwangju and Chonnam should be divided into five sections, each with similar geographical environments. This will be an improvement over the old uniform approach to environmental studies in which all regions were treated as being the same each region will now receive special attention. 2. It is necessary to maximize the efficient use of the Environmental Education Building. When Media, environmental data and special materials for environmental education are used effectively, teachers can lead class effectively and students will be more interested in the class. 3. We can detect the cause of pollution, increase interest in the environment and easily solve environmental problems by collecting and displaying environmental educational materials. 4. An environmental education corner could boost students' interest in environmental problems and could act as a kind of bridge between theoretical and practical education. 5. Media and environmental data must be specialized according to the geographic character of each region. In this way, we can expect to improve the quality of environmental education over the simplistic environmental education of previous years. 6. Students will become interested in the problems of the region in which they live through social studies, and primarily through the environmental curriculum. 7. We can prevent learning deficiencies by making a consistent teaching plan. The teaching and learning methods will be improved and the teachers will be proud of what they teach. 8. The purpose of the Education Procedure Content Analysis is to make teaching and learning concise and easy by systematizing environmental and related subjects. This can be done by adding an environmental unit to the geographic section of social studies. 9. Citizens' interest in their own residential environment can be increased through action by sustaining environmental preservation movements to local region people.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.2
• /
• pp.129-138
• /
• 2011

Construction methods for underground structure are classified as bottom-up, up-up, and top-down methods depending on the procedure of construction related to a superstructure. In top-down construction methods, building's main structure is built from the ground level downwards by sequentially alternating ground excavation and structure construction. In the mean time, the main structure is also used as supporting structure for earth-retaining wall, which results in the increased stability of the earth-retaining wall due to the minimized deformation in adjacent structures and surrounding grounds. In addition, the method makes it easy to secure a field for construction work in the downtown area by using each floor slabs as working spaces. However top-down construction method is often avoided since an excavation under the slab has low efficiency and difficult environment for work, and high cost compared with earth anchor method. This paper proposes a combined construction method where semi-open cut is selected as excavation work, slurry as earth -retaining wall and CWS as top-down construction method. In the case study targeted for an actual construction project, the proposed method is compared with existing top-down construction method in terms of economic feasibility, construction period and work efficiency. The proposed construction method results in increased work efficiency in the transportation of earth and sand, and steel frame erection, better quality management in PHD construction, and reduced construction period.