• 한국정보통신학회논문지
• /
• 제25권2호
• /
• pp.193-201
• /
• 2021

용접은 선박 및 해양플랜트의 생산 및 건조에 있어 매우 높은 비중을 차지하는 작업이다. 용접부의 품질 검증을 위해 비파괴 검사를 수행하는데, 우리나라에서는 주로 방사선투과검사(RT)를 활용한다. 현재 대부분의 조선소에서는 용접부의 촬영을 통해 얻어진 필름을 인화하여 검사에 활용하는 아날로그 형태를 채택하고 있다. 이에 방사선 촬영에서부터 합부 판정까지 소요시간이 길고 복잡하며, 관련 분야의 자격을 보유한 검사자에 의해 수작업으로 진행되고 있는 실정이다. 본 논문에서는 이러한 문제를 개선하기 위해 조선소에서 발생하고 있는 RT 필름을 고해상도로 스캔하여 디지털화한 후, 관리 서버에 축적하고, 인공지능 기술을 적용하여 용접 결함을 판독하기 위한 플랫폼에 관한 내용을 다룬다. 이를 위한 일련의 요소인 아날로그 RT 필름 스캔장비, 용접 검사 정보 통합 관리 플랫폼, 결함 판독 알고리즘, 시각화 소프트웨어 등을 설계 및 개발하고, 개발한 각 요소를 상호 연계하여 테스트 및 검증하는 과정에 관하여 기술한다.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.37-43
• /
• 2020

국내 도로, 철도 등 SOC 시설의 내진보강율은 2017년 기준 96%이며 건축물은 2016년 기준 약 7백만동 중 내진성능이 확보된 건축물은 51만동에 불과하다. 조적조 건축물은 전체 건축물의 38.8%를 차지할 만큼 비중이 크지만 내진성능이 확보된 것은 2.0% 내외로 거의 전무한 실정이다. 이러한 문제를 해결 하기 위해국내에서는 정부차원의 내진 대책이 추진되고 있으나 현재까지 미비한 상황이다. 국외의 캐나다 벤쿠버 UBC 연구팀은 조적조 내진성능 보강을 위해 EDCC를 개발하여 사용하고 있다. EDCC는 섬유혼입으로 콘크리트 연성능력 확보 및 가교작용으로 콘크리트의 변형 저항능력을 확보 할 수 있는 건설재료이다. 그러나 내진성능 확보를 위해 EDCC를 분사형으로 사용하지 않기 때문에 다양한 재료의 검토가 필요하다. 이에 본 연구에서는 조적조의 내구성능 향상을 위한 뿜칠재료 연구개발의 일환으로 내진보강용 섬유보강 모르타르의 분사특성을 평가하고자 하였으며, 섬유보강 모르타르의 섬유사용량에 따른 분사특성 및 증점제 사용량에 따른 점도변화를 검토하였다. 조적조 내진보강용 섬유보강 모르타르의 부착성능 및 시공성능을 검토한 결과 섬유의 사용량은 1%, 증점제의 사용량은 1%로 최적 사용량을 도출할 수 있었다.

• 한국지반신소재학회논문집
• /
• 제20권4호
• /
• pp.19-32
• /
• 2021

본 연구에서는 심층혼합처리공법에 관하여 저자들에 의해 수행된 국내/외 설계, 시공 및 품질관리에 대한 평가와 고찰을 수행하였고, 추후 DCM 공법의 발전을 위한 개선 사항들을 제시하였다. 본 연구 결과, 실내배합실험 시 강도에 대한 단면적 보정이 필요하고, 외삽법 적용 시 실제와 다른 결과가 도출될 수 있으므로 주의가 요구됨을 알 수 있었다. 설계 시 개량율과 개량형식 등을 모두 고려하여 적용 가능한 설계법을 선정해야 하며, 안전율이 적용된 허용압축강도는 안정성 검토를 위한 기준치를 의미하는 것이지 설계 지반정수가 아님을 확인하였다. 응력분담비의 경우 관행적인 값을 적용하기 보다는 설계 조건을 반영한 실험 및 이론적 응력분담비를 산정해야 경제적인 설계를 수행할 수 있었다. 시공 시 선천공이 예상되는 경우 증가된 함수비가 원지반 대비 크지 않은 경우 함수비 증가를 고려하지 못한 결과를 사용하여도 큰 문제가 발생하지 않는 경우도 있었다. 또한, 개량길이 대비 선단처리 길이의 비율이 높은 경우 시공 시 단위길이당 설계 시멘트량이 적게 주입될 수 있음을 확인하였다. 품질관리 시 개량체 코어링은 1축 개량체는 D/4~2D/4, 다축 개량체는 D/4 지점이 최적인 것으로 평가되었다. 품질관리를 위한 항목으로 개량체의 일축압축강도와 더불어 TCR을 고려하는 기준이 국내 실정에 더 적합할 것으로 판단된다.

• 한국유통학회지:유통연구
• /
• 제17권1호
• /
• pp.37-63
• /
• 2012

가맹사업에 있어 배타적 영업지역보호정책의 문제는 경제학 및 경영학 분야뿐만 아니라 사회 정치적으로 매우 중요한 쟁점이다. 본 연구는 배타적 영업지역과 관련한 기존 문헌을 토대로 가맹사업에서의 효율성 관점에서 배타적 영업지역보호에 영향을 미치는 변수와 배타적 영업지역 보호가 가맹본부 및 가맹점의 성과에 미치는 영향을 분석하고 있다. 가맹점의 대부분이 중소상인들이란 점을 감안하면 유통정책적으로도 중요한 의미가 있다고 할 수 있다. 본연구는 사회적으로도 잇슈가 될 수 있는 기업의 전략을 타당성과 당위성, 그리고 논리성으로만 평가하는 것이 아니라 실제 자료를 근거로 분석하였다. 또, 정책연구들이 가지고 있는 자료와 이론의 한계를 감안한 탐색적 방법론을 활용하여 보다 실질적이고 현실적용성이 뛰어난 분석을 제안하였다. 분석 결과, 배타적 영업지역보호는 긍정적인 효과가 있기는 하지만 통계적으로 유의하지 못하였으며, 가맹점과 가맹본부간의 로얄티가 많아서 위험공유성향이 클때에는 배타적 영업지역보호를 하지 않는 것이 효과적이었고, 가맹점을 모집하기 위해 배타적 영업지역보호를 해주거나 배타적 영업지역보호를 통해서 가맹사업본부내의 효율성을 키우기 위한 경우에는 긍정적인 효과가 유의하게 나타나는 것으로 밝혀졌다. 하지만 외부경쟁으로부터 직영점을 보호하기 위하거나 시장성장을 활용하기 위한 배타적 영업지역보호는 좋은 성과를 내지 못하였다. 또한 쉽게 배타적 영업지역보호를 할 수 있기에 이런 제도를 도입하는 것도 역시 좋은 성과를 내지 못한 것으로 나타났다. 결과적으로 배타적 영업지역보호가 기업의 운영효율을 증대시키기 위하여 하는 경우는 성과가 좋으나 다른 목적을 위하여 배타적 영업지역보호를 활용하는 것은 바람직한 결과를 못내는 것으로 나타났다. 본 연구는 분석결과를 토대로 영업지역 보호를 획일적으로 활용하거나 법으로 강제하기 보다는 가맹사업본부와 가맹점의 관계 및 상황, 또 동기에 맞추어 탄력적으로 적용하는 것이 바람직하다는 제안을 하고 있으며, 이를 근거로 몇 가지 정책적 시사점을 제시하였다.

• Asia Marketing Journal
• /
• 제14권2호
• /
• pp.157-176
• /
• 2012

시장구조 분석에서 흔히 사용되는 상표전환 자료는 비내구재 분석에 적절한 방법이 될 수 있으나 자동차 같이 사용연한이 장시간인 내구재의 경우에는 소비자의 상표에 대한 선호도가 변할 수 있어 상표전환 자료의 사용에 문제가 있다. 따라서 경쟁을 잘 포착할 수 있는 다른 접근이 필요하다. 본 연구는 이에 대한 대안으로 상표간 경쟁 자료로써 고려상표군을 이용하여 자동차 시장의 구조를 Latent Class 군집분석을 활용한 탐색적 검증방법으로 분석하였다. 또한 소비자 행동분석에 근거하여 상표간 경쟁의 근간을 이루는 고려상표군 형성에 영향을 미치는 인자들을 밝히는데 중점을 두었다. 미국 자동차 시장을 대상으로 분석한 결과, 시장은 상표 원산지 효과에 의해 구분되었다. 즉, 미국 상표, 유럽 상표, 그리고 아시아 상표 등으로 시장이 구분되었다. 또한 각 시장구조 내 소비자들의 고려상표군 형성에 신뢰성/안전, 이미지/즐거움, 경제성 등의 편익과 성별, 소득 등 개인적 요인이 영향을 미치는 것으로 나타났다.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1995년도 제27회 학술발표회
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• 한국직업건강간호학회지
• /
• 제3권호
• /
• pp.54-70
• /
• 1993

According as the automation of clerical work(OA ; Office Automation) develops, the use of VDT(Visual or Video Display Terminal) is increasing suddenly. But, in proportion to the spread of office automation(OA tendency), the self-conciousness syptom attendant upon the work is appearing also (Kim, Jung Tae, Lee, Young Ook, 1990). The apparatuses of office enable the clerical workers to be convenient and perform mass businesses. But, they are increasing the opportunity to be exposed to VDT syndrom, techno stress, computer terminal disease, pain by muscle strain(RSI), bradycausia of noise nature, and electromagnetic waves, etc. which are referred to as the new type of occupational diseases to the workers. It is the real situation that the workers to use VDT is complaining of the physical inconvenience sense in the recent newspaper and literature, it is the point of time that the sydrome to come from VDT use and computer terminal disease, etc. must be classified into the occupational disease(Lee, Kwang Young 1990, Lee, Kyoo Hak 1990, Lee, Won Ho 1991, Lee, Si Young 1991, Lee, Joon 1991, Choi, Young Tae 1991, Heo, Seung Ho 1989). In addition, it is the real situation that the scientifitic study result about the scope that electromagnetic waves has influence on the human body has not been suggested yet, and criticism on the stable exposure permission standard about electromagnetic waves to be emitted from VDT and on the problem in the health about electromagnetic waves is continuing. (IEEE Spectrum, 1990). In addition according to the experience of nursery business of industry field, it is the real situation that the patients who consult complaining of physical and mental inconvenience sence, among the users of apparatus of office automation, are reaching 10% of the patients coming to doctor's room. Therefore, it is necessary to confirm the self-consciousness symptom that the clerical workers complain of multilaterally with the actual state examination about the use of the apparatuses of offices automaton. Thus, this study was tried as th basic data for the cosultation and education for the maintenance and furtherance of the health of workers as the nurse of industry field, by confirming the contents of self-consciousness symptom attendant upon the use of the apparatus for office outomation making the financial institution in which the spparatus for office automation in most frequently used as the subject, and by examining whether there is the difference according to the subject of study, the data were collected, by using the questionnaire method, making 200 workers who consented to the study participation as the subject, among the persons who have spent over 3 months since they used the apparatuses for office automation and didn't receive the treatment in hospital due to the clerical disease for recent 3 years. The period of data collection was from Oct. 9, 1991 to Oct. 12. As for the measurement instrument about the complaint if self-consciousness symptom attendant upon the use of apparatuses fo office automation, the question item on the complaint symptom of health problem attendant upon the treatment of VDT that Kim(1991) developed and on CMI health problem and the question items on the fatigue degree due to industry were used by previous examination to 25 persons. Collected data were analyzed with the statistical method such as percentage, arithmetic mean, Person correlation coeffient, Kai square verfication, t-test, ANOVA, etc. by using SPSS/PC+ program, and the result is as follows : 1. The self-consciousness symptom that the clerical workers complained of most frequetly appeared high in 'My eyes are tired'(99.4%), 'I feel fatigue and weariness'(99.4%), 'I feel that my head is heavy5(90.0%), 'eyesight fell'(88.8%), 'I have a stiff neck'(88.8%), 'I fell pain in the shoulder'(85.0%), 'I feel cold and painful in the eyes'(76.9%), 'I feel the dry sense of eyeball'(76.2%), 'My nerves are edgy, and I an fretful, (75.6%), 'I feel pain in the waist'(73.2%) and 'I fell pain in the back'(72.8%). It emerged that the subject use the apparatuses for office automation complained of self-consciousness symptoms related to visual symptoms and musculoskeletal symptoms. 2. As for the general feature of examination subjects, the result to see the distribution by classifying into sex, age, school career, use career of apparatuses for office automation, skillfulness degree of the use of apparatus for office automation, use hours of the apparatuses for office automation per 1 day, type of business of the apparatus for office automation, rest hours during the use of apparatus for office automation, satifaction degree of business of office automation, and work circumstance, etc. emerged as follows : As for the sex of subjects, the distribution showed that men were 58.8% and women were 41.3%, Age was average 26.9. As the distribution of school career, the distribution showed that4below the graduation of high school' was 58.8%, 'graduation from junior college-university' was 35.0%, and 'over graduate school' was 6.3%. In the question to ask the existence or non-existence of experience of health consultation in connection with the work of office automation, the response that I had the consultation exprience and I feel the necessity emergerd as 90.1% And, the case that the subject who didn't wear the glasses or lens before using the OA apparatus wear glasses or lens after using OA apparatus emerged as 28.3% of whole. As for the existence or non-existence of use career of OA apparatus, the case under 3 years was highest as 52. 7%. As for the skillfulnness degree about the use of apparatus for office automation, most of them are skillful with the fact that 'common' was 44.4%, 'skill' was 42.5%, and 'unskillful' was 13.1% As for the use average hours of the apparatus for office automation per 1 day, the distribution showed that the case under 3-6 hours was 33.1%, the case under 6-9 hours was 28.1%, the case under 3 hours was 30.6%, and the case over 9 hours was 8.1% Main OA business and the use hours for 1 day showed in the order of keeping and retrieval, business of information transmission(162min), business of information transmission(79.3 min), business of document framing(55.5 min), and business of duplication and printing(25.4min). as for the rest during the use of apparatus for affice automation, that I take rest occasion demands the major portion, but that I take after completing the work emerged as 33.8%. Though the subiness gets to be convenient by the use of the apparatus for of office automation, respondents who showed the dissatisfaction about the present OA business emergd high as 78.1%. The work circumstances of each office was good with the fact that the temperature of office was 21.8, noise was average 42.7db, and the illumination was average 364.4 lx, in the light of ANSi/HFS 100 Standard. 3. Sight syptom, musculoskeletal symptom, skin and other symptoms showed the significant difference according to the extent of skillfulness of the apparatus for office automation. All the symptoms exept skin symptom showed the difference according to the use hours of the apparatus for office automation. All the question items exept the sytoms of digestive organs and the rest hours during the apparatus for office automation showed the signicant difference. The question item which showed the signicant difference from the satisfaction degree of present OA business showed the significant difference from all the question item classified into 6 groups. But, age and school career didn't significant difference from the complaint of any self-consciousness symptoms.