• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.608-609
• /
• 2011

In this study, we tried to validate FLUENT solver model and domain setting for the problem of convective heat transfer in multiple tube bank under transitional zone. We have paid special attention to verify proper boundary conditions and the grid convergence. Through validation work, it is found that unsteady solution method with two-dimensional simulation domain can produce reasonable accurate results compared with existing experimental data. Simulation results with steady solution generates relatively large error. We found that both steady and unsteady method for three-dimensional domain shows acceptable accuracy. Further parametric study for deriving correlation from transverse and longitudinal pitch is currently underway.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.13-19
• /
• 2012

There are many dynamic properties in measured end-milling force. So, it is difficult to predict the real static property of end-milling force. Also the behavior of end-milling force is very complex to predict with the measured one. To extract the static property from measured force, it must be filtered and its problem is closely related to a de-noising one. Also this paper presents alternative de-noising method of end-milling force using wavelet filter bank, based on the wavelet transform and its inverse one. In this paper, by comparing the measured force and its wavelet filtered one, the fundamental end-milling force property after wavelet transform is well reviewed and analyzed. This result of wavelet filtering with filter bank shows the static force of end-milling which has severe dynamic properties occurring in entry and exit state of edge emersion into the workpiece.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.62-63
• /
• 2017

According to the rapid development of digital technology, the free formed buildings with complex and various curved surfaces are being constructed. Most of the external cladding of free formed buildings have been applied materials such as metal, glass, FRP, GFRC, etc. However, these materials have many disadvantages such as a complicated manufacturing process for realizing 3D irregular shape and an increase in production period and cost. Therefore, the studies for UHPC which is an optimized material for overcoming this problem for a long time in overseas. This study reviewed the remodeling construction of Samsung-dong KEB Hana Bank appling the exterior curved UHPC panel for the first time in Korea. As a result, we confirmed the possibility of UHPC panels with various free formed shapes.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.1
• /
• pp.24-29
• /
• 2004

A new low cost hybrid active filter for thyristor-controlled rectifier load is presented to overcome the high cost problem of the active or the other hybrid active filters. The proposed hybrid active filter which consists of tuned (5th and 7th harmonics) LC passive filters, power factor improvement(PFI) capacitor bank, and active filter compensates power factor as well as harmonic currents. Since most of harmonic currents are filtered by the passive filter and most of reactive power is compensated by the PFI capacitor bank, the power rating of active filter can be minimized, resulting in cost minimization of the proposed hybrid active filter. A 300kVA hybrid active filter system is implemented and tested using 1MVA thyristor rectifier load to verify the operation and performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.275-278
• /
• 2001

A H$_{\infty}$ control theory is applied to the design problem of synthesis filters in a mutirate filter bank. We select a desired pure time-delay system as reference model, and then consider the error system between the mutilate filter bank and the reference model. The synthesis filters minimize the ι$_2$-induced norm of the error system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.131-139
• /
• 1999

An experimental study was conducted to investigate the fouling effects of geothermal water scale deposited onto a heating surface upon its forced convection heat transfer characteristics. Scales deposited onto the heating surfaces of heat exchangers seriously reduce the heat transfer perfor-mance and also increase the hydrodynamic drag. Accordingly fouling is an important problem in the design and operation of heat exchangers. The cylinders were settled in tandem with equal dis-tance between neighbouring cylinders and only the test cylinder was heated under the condition of constant heat flux. The Reynolds number was varied from 13000310 through 50003100. It is found that the heat transfer of the in-line tube banks greatly varies with the fouling of geothermal water scale especially its scale height. Further the local and average Nusselt numbers strongly depend upon the cylinder spacing and the Reynolds number.

• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 2007.10b
• /
• pp.30-37
• /
• 2007

Modern cities are weak in traditional culture with the lack of characteristics and the problem of environmental deterioration. As the important carrier of urban culture, landscape architecture should be responsible for solving these problems. The urban need is paid much attention in the design of South Bank Linear Park in Meizhou city. Following the principle of inheriting and developing urban traditional culture, the design of the whole park is integrated with Hakka culture in Meizhou, which forms the landscape with local features and modern landscape architecture culture, and promotes the urban culture construction.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.3-9
• /
• 2012

The exhaustion of fuel and tremendous greenhouse gas emissions are caused by the sharp increase in the use of fossil fuel. Especially, accounting for over 25% of carbon dioxide emissions, Construction is main environmental problem. So, in this study, we applied network analysis in the selection of spoil-bank to reinforce the GIS to decrease carbon dioxide emissions in construction sites. As a result, we could calculate the expected carbon dioxide emission and transportation cost of the proposed sites by the shortest distance and the least amount of time. We found that if spoil-bank is chosen based on the result, carbon dioxide emissions will be decreased as much as we plant a pine tree. We can also decrease largely by considering and applying complex causes which affect carbon dioxide emissions in construction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.167-173
• /
• 2023

The cash flow matching problem(CFMP) aims to minimize the initial investment by paying the total amount due for the T-year in principal and interest of bonds or bank deposits without paying the full amount in cash. Linear programming(LP) is the only known way to solve CFMP. The linear programming method is a problem that optimizes T linear functions, and it cannot be solved by handwriting, so LINGO, which is a solution to the linear programming method, is used. This paper proposes an algorithm that obtains the solution of CFMP solely by handwriting without the help of LINGO. The proposed algorithm determines the amount of bond purchases by covering payments until the previous year of the next maturity bond in the order that the maturity date falls from the longest to the short term. In addition, until the year before the maturity of the shortest maturity bond, the amount of deposit covered by the principal and interest of the bank deposit was determined. As a result of applying the proposed algorithm to two experimental data, it was shown that more accurate results can be obtained compared to the linear programming method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.960-966
• /
• 2011

In this paper, an $\mathfrak{H}$_/$\mathfrak{H}_{\infty}$ fault detection and isolation (FDI) observer design problem is investigated for discrete-time delayed systems. To that end, a bank consisting of the sensor's number of observers is introduced. Each residual should be sensitive to a certain partial group of faults, but robust against the disturbance as far as possible. We formulate this multiobjective FDI problem as $\mathfrak{H}$_/$\mathfrak{H}_{\infty}$ observers design problem. Sufficient design condition is expressed as iterative linear matrix inequalities. The fault is then detected and isolated by evaluating the residuals through an FDI decision logic. A computer simulation is provided for verification of the proposed technique.