• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.39-44
• /
• 2020

Recently, numerous researches are being conducted in flexible substrate to apply to wearable devices. Particularly, Conductive substrate researches that can implement the wearable devices on clothing are massive. In this study, we formed fiber substrate spraying CNT and Pd mixed solution on it and plated metal layer with electroless plating. Used SEM equipment and EDS analysis to analysis structure of the plated fiber substrate and discovered Ni layer was created. For check electrical properties, mapping was performed to check surface resistance and distribution of resistance of electroless plated fiber substrate with 4-point probe. It was confirmed that conductivity was improved as the duration of electroless plating was increased, and it was found that distribution of resistance by surface location was uniform. Changes in resistance due to mechanical stress were measured through tensile, bending, and twisting tests. As a result, it was confirmed that resistance change of flexible substrate gradually disappeared as plating time increased. Using UTM (Universal testing machine), it was analyzed mechanical properties of the electroless plated substrate with respect to changes in plating time were improved. In the case of conductive fiber substrate in which electroless plating was performed for 2 hours, tensile strength was increased by 16 MPa than fiber substrate. Based on these results, we found that Ni-CNT-Fabric flexible substrate is adequate for clothing-intergrated conductive substrate and we positively expect that this experiment shows flexible substrate can adapt to and develop not only a wearable device technology but also other fields needing flexibility such as battery, catalyst and solar cell.

• Journal of the Korean earth science society
• /
• v.38 no.4
• /
• pp.251-262
• /
• 2017

The system of magnetic exploration with a drone flight was constructed and applied to the iron mine site. The magnetic probe system installed on the drone used a sensor as Bartington's fluxgate type magnetometer, Mag639 and the A/D converter to collect magnetic intensity values on the tablet PC. The drone flight control module is a highly expandable Pixhawk with allowing 15 minutes of flight by loading 3kg. Experiments on the magnetic field interference range were performed to remove the erroneous effect from the drone with applying RTK GPS to obtain the magnetic intensity value at the accurate position. The accurate location information enabled to obtain the gradient measurement of magnetic field by measuring twice at different altitudes. Also, by using the terrain information, we could eliminate the terrain effect by setting the flight path to fly along the terrain. These results are in line with the field experiments using the nuclear proton magnetometer G-858 of Geometrics Co., Ltd, which adds to the reliability of the drone based aeromagnetic survey system we constructed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.641-649
• /
• 2020

This study was conducted to examine the effects of instruction (explicit, implicit) and stimulus presentation time (300 ms, 500 ms) in ABM training. According to the Social Avoidance and Distress Scale (SADS) and the attention bias score (ABS), 60 undergraduate students were selected. All participants' SADS scores were above 82 and their ABS score was greater than 0. The training group was explicit-300 ms training group (n=10), explicit-500 ms training group (n=10), implicit-300 ms training group (n=10) and implicit-500 ms training group (n=10). In the implicit instruction group, only information about procedure was included. In the explicit instruction group, additional information about training manipulation (the probe always presented at the location of the preceding neutral stimuli) was provided. The control group were placebo-300 ms control group(n=10) and placebo-500 ms control group(n=10). After 8 sessions of training, the effect was only found in instruction conditions. The explicit training group showed significantly decreased SADS after training. ABS changed significantly in all three conditions but the treatment effect was most effective in the explicit instruction condition. No significant effect was found in the stimulus presentation time. These results suggest that explicit instruction might promote the effect of ABM training compared to implicit instruction.

• BMB Reports
• /
• v.38 no.6
• /
• pp.739-747
• /
• 2005

Full-length cDNA sequences of four novel SPATA4 genes in chimpanzee, cow, chicken and ascidian were identified by bioinformatic analysis using mouse or human SPATA4 cDNA fragment as electronic probe. All these genes have 6 exons and have similar protein molecular weight and do not localize in sex chromosome. The mouse SPATA4 sequence is identified as significantly changed in cryptorchidism, which shares no significant homology with any known protein in swissprot databases except for the homologous genes in various vertebrates. Our searching results showed that all SPATA4 proteins have a putative conserved domain DUF1042. The percentages of putative SPATA4 protein sequence identity ranging from 30% to 99%. The high similarity was also found in 1 kb promoter regions of human, mouse and rat SPATA4 gene. The similarities of the sequences upstream of SPATA4 promoter also have a high proportion. The results of searching SymAtlas (http://symatlas.gnf.org/SymAtlas/) showed that human SPATA4 has a high expression in testis, especially in testis interstitial, leydig cell, seminiferous tubule and germ cell. Mouse SPATA4 was observed exclusively in adult mouse testis and almost no signal was detected in other tissues. The pI values of the protein are negative, ranging from 9.44 to 10.15. The subcellular location of the protein is usually in the nucleus. And the signal peptide possibilities for SPATA4 are always zero. Using the SNPs data in NCBI, we found 33 SNPs in human SPATA4 gene genomic DNA region, with the distribution of 29 SNPs in the introns. CpG island searching gives the data about CpG island, which shows that the regions of the CpG island have a high similarity with each other, though the length of the CpG island is different from each other.This research is a fundamental work in the fields of the bioinformational analysis, and also put forward a new way for the bioinformatic analysis of other genes.

• Journal of Aquaculture
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2004

A rainbow trout uncoupling protein 3 (UCP3) cDNA clone, encoding a 310 amino acid protein, was cloned and sequenced from a liver cDNA library. Two different splice variants designated UCP3-vl and UCP3-v2, were identified through liver cDNA library screening using rainbow trout UCP3 cDNA clone as a probe. UCP3-vl has 3 insertions in the UCP3 cDNA: the first insertion (133 bp), the second (141 bp), and the third (370 bp) were located 126 bp, 334 bp and 532 bp downstream from the start codon, respectively. UCP3-v2 contained a single insertion, identical in sequence and location to the second insertion of UCP3-vl. UCP3, a mitochondrial protein, functions to modulate the efficiency of oxidative phosphorylation. UCP3 has been detected from heart, testis, spinal cord, eye, retina, colon, muscle, brown adipose tissue and white adipose tissue in mammalian animals. Human and rodent UCP3s are highly expressed in skeletal muscle and brown adipose tissue, while they show weak expression of UCP3 in heart and white adipose tissue. In contrast to mammalian studies, RT-PCR and Southern blot analysis of the rainbow trout demonstrated that UCP3 is strongly expressed in liver and heart. UCP3, UCP3-vl, and UCP3-v2 all contain an Ava III short interspersed element (SINE), located in the 3'untraslated region (UTR). PCR using primers from the Ava III SINE and the UCP3 3'UTR region indicates that the UCP3 cDNA is structurally conserved among salmonids and that these primers may be useful for salmonid species genotyping.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.164-175
• /
• 2019

Installation of digital tachograph, black box, and ADAS have been enforced to commercial vehicles for preventing violent driving and accidents by the Traffic Safety Act in Korea. Nevertheless, the damage caused by road hazards has increased 1.5 times in 2016 compared to 2013. So, developing new technologies that can identify road hazard using the sensors installed in commercial vehicles are conducting by the Ministry of Land, Infrastructure and Transport. As a part of the technologies, this research analyze the error range of GPS installed in commercial vehicles that vary according to the driving speed. As a result, the average error was 9.72m at the driving speed of 100km/h, and the error was 2.1 times larger than the average error of 4.69m at the driving speed of 40km/h. The event point proper integration/separation range(m) was analyzed to be 20m with a recognition rate of 90% or more at the same point regardless of driving speed. The results of this research can be used as basic data for improving the accuracy of location-based data would be collected using commercial vehicles.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.6-12
• /
• 2010

Fiber optic sensor using fiber Bragg grating(FBG) probes is used for monitoring strain and temperature distributed on the wide surfaces of large structures. In this paper, in order to use many FBG probes in one optical fiber line, we propose a complex multiplexing technology which is composed of two techniques, one is time division multiplexing and another is wavelength division multiplexing. However, we only investigate the characteristics of time division multiplexing because FBG sensors basically can be operated by wavelength division multiplexing. We calculate the optimal reflectivities and the lengthwise location of five FBG probes in serial connection in order to obtain the unique reflected intensities from the FBG probes. We fabricate five FBG probes with the reflectivities of 13%, 16%, 25%, 40% and 80%, which are determined by the theoretical calculation, and observe the signal reflected from each FBG in the time domain from the experiment. There are differences between experimental and theoretical results caused by the signal noise and the differences of reflectivities of FBG probes. But the experimental results shows the reflected signals of five FBG probes which prove the availability of complex multiplexing.

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.189-195
• /
• 2001

We prepared TMR junctions of NiFe(170 )/CoFe(48 )/Al(13 )-O/CoFe(500 )/Ta(50 ) structure on 2.5$\times$2.5 $\textrm{cm}^2$ area Si/SiO$_2$ substrates in order to investigate the uniformity of magnetoresistance(MR) value using a ICP magnetron sputter. Each layer was deposited by the ICP magnetron sputter and tunnel barrier was formed by the plasma oxidation method. We measured MR ratio and resistance of TMR devices with four-terminal probe system by applying external magnetic field. Although we used ICP sputter which is known as superior to make uniform films, the standard variation of MR ratio was 2.72. The variation was not dependent on the TMR devices location of a substrate. We found that MR ratio and spin-flip field (H's) increased as the resistance increased, which may be caused by local interface irregularity of the insulating layer. The variation of resistance value was 64.19 and MR ratio was 2.72, respectively. Our results imply that to improve the insulating layer fabrication process including annealing process to lessen interface modulation in order to mass produce the TMR devices.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.49-55
• /
• 2017

In this study, gas turbine engine inlet duct was designed to satisfy uniform flow at aerodynamic interface plane (AIP). Haack-series was selected as nose cone profile and duct outer radius($r_o$) was designed to satisfy to match with area change rate between the nose cone and outer duct wall by the 1-D sizing. The design object of the inlet duct wall profile which has the gradual area change rate was uniform Mach number in the core flow region and minimum boundary later thickness at the both inner nose wall and outer duct wall. The flow characteristics inside the inlet duct was evaluated using CFD. The static pressure distribution at the AIP showed uniform pattern within 0.16%. Based on Mach number profile, the boundary layer thickness was 2% of channel height. Kiel temperature rake location was decided less than 100 mm in front of nose cone where the Mach number is less than 0.1 in order to maximize the temperature probe recovery rate.

• Journal of Periodontal and Implant Science
• /
• v.35 no.3
• /
• pp.563-575
• /
• 2005

The aim of present study is to evaluate the influence of adjacent tooth to the microbiology of clinically healthy implant. Control group included patients who had clinically healthy implant and tooth with healthy $periodontium(PD{\leq}3mm)$, test group was composed of patients who had clinically healthy implant and tooth with periodontal pocket(PD>3mm). The criteria of clinically health implant are no pain or discomfort, the restorative suprastructure provide satisfactory fit and function, and the tissue around the fixtures were firm and probing with standard periodontal probe with a rounded tip 0.5mm in diameter resulted in penetration of no more than 5mm when using a force of 0.5N at any location. 38 patients, partially edentulous subjects with endosseous root-form implants were selected. All subjects were medically healthy and had not taken systemic antibiotics and professional plaque control 3 months before sampling. Number of control group is 25(mean age $52{\pm}13$, 26 teeth, 34 implants) and test group is 13(mean age $60{\pm}13$, 13 teeth, 17 implants). All teeth and implants of each patient were examined probing depth(PD), bleeding on probing(BOP), and plaque index(PI), and samples of subgingival plaque were obtained at each site with sterile curet or fine paper points, then the plaque transferred to PBS. Obtained samples were examined for the presence of P. gingivalis, T. forsythensis, and T. denticola by the polymerase chain reaction(PCR). The relationship among clinical parameters and the colonizations by the 3 bacterial species from natural teeth and implants region were analyzed by student t-test. The results of this study were as follows: 1. PD was different in teeth between 2 groups(p<0.05), but the other parameters were not. 2. Statistically significant difference was not found in clinical parameters of implants between 2 groups. 3. All bacterial prevalences of teeth were higher in test group than in control group, and prevalence of T. forsythensis had statistically significant difference between 2 groups(p<0.05). 4. Prevalences of P. gingivalis and T. forsythensis are higher in test group than control group, and that of T. denticola is higher in control group than in test group. But there were no statistically significant differences between 2 groups. In conclusion, there is no statistically significant difference in prevalence of implant microbiology between 2 groups. But if the number of samples increased, it will be possible to find out statistical significance in prevalence of P. gingivalis. It seems that pocket of adjacent tooth influences prevalence of P. gingivalis. These results mean that improvement of the periodontal condition before implantation is very important.