• Journal of the Korean Geotechnical Society
• /
• v.28 no.2
• /
• pp.43-55
• /
• 2012

In this study, the resistance bias factors are calculated to determine the resistance factor of Gravel Compaction Piles which is one of the soft ground improvement methods. In order to calculate resistance bias factors for gravel compaction piles, two ultimate bearing capacities were analyzed. One is the ultimate bearing capacity in 2.54 cm settlement measured using data of the field loading test on 41 piles and the other is the ultimate bearing capacity calculated using the seven equations concerning bulging failure. The results of analysis show that the probability density function of the calculated ultimate bearing capacities has a lognormal distribution. Resistance bias factor and the coefficient of variation for Greenwood equation are 0.91 and 0.38, respectively, and for those of Hughes & Withers are 1.19 and 0.39. The two equations are suitable for calculating resistance factors for LRFD of soil improvement using gravel compaction piles.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.1
• /
• pp.5-10
• /
• 2010

Among a variety of cleaning processes, the cryogenic carbon dioxide ($CO_2$) cleaning has merits because it is highly efficient in removing very fine particles, innoxious to humans and does not produce residuals after the cleaning, which enables us to extend its area of coverage in the semi-conductor fabrication society. However, the cryogenic carbon dioxide cleaning method has some technical research issues in aspect to particles' adhesion and removal. To resolve these issues, performing an analysis for the identification of particle adhesion mechanism is needed. In this study, a research was performed by a theoretical approach. To this end, we extended the G-T (Greenwood-Tripp) model by applying the JKR (Johnson-Kendall-Roberts) and Lennard-Jones potential theories and the statistical characteristics of rough surface to investigate and identify the contact, adhesion and deformation mechanisms of soft or hard particles on the rough substrate. The statistical characteristics of the rough surface were taken into account through the employment of the normal probability distribution function of the asperity peaks on the substrate surface. The effects of surface roughness on the pull-off force for these particles were examined and discussed.

• The Journal of Engineering Geology
• /
• v.21 no.1
• /
• pp.1-13
• /
• 2011

Joint roughness is one of the most important parameters in analysis of rock slope stability. Especially in probabilistic analysis, the random properties of joint roughness influence the probability of slope failure. Therefore, a large dataset on joint roughness is required for the probabilistic analysis but the traditional direct measurement of roughness in the field has some limitations. Terrestrial LiDAR has advantagess over traditional direct measurement in terms of cost and time. JRC (Joint Roughness Coefficient) was calculated from statistical parameters which are known from quantitative methods of converting the roughness of the material surface into JRC. The mean, standard deviation and distribution function of JRC were obtained, and we found that LiDAR is useful in obtaining large dataset for random variables.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.41-45
• /
• 2005

The diagnostic management of patients with chest pain remains a clinical challenge. Magnetocardiography (MCG) has been proposed as a new non-invasive method for detection of myocardial ischemia. To date, however, MCG technique is not intensively introduced for clinical use. One of the main reasons might be the absence of statistically valid and diagnostically clean criteria, which can determine the presence of certain heart disease. In this work, we suggested a new method to classify the diagnostic value of MCG for the detection of coronary artery disease (CAD) in patients with chest pain. MCG was recorded for three groups (healthy subjects and patients without and with CAD) by means of the 64 channel SQUID gradiometer system installed at a hospital. Using four parameters, which were found to be significantly different between groups, we evaluated a probability, in which parameters can be classified into each group based on the distribution function of the parameter in each group. For all parameters, sum of probabilities was compared between groups to determine the presence of CAD. Our classification method shows that the MCG can be a useful tool to predict the presence of CAD with sensitivity and specificity of higher than $80\%$ each.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.565-573
• /
• 2016

Wi-Fi Direct standard technology(Wi-Fi Peer to Peer Technical Specifications v1.2, 2010) was designed for allowing peer to peer communication between two or more devices and various products which have been currently manufactured such as smart phone and smart TV have already provided this technical function. In this technology the role of Coordinator in Wi-Fi infrastructure would be matched to GO(Group Owner) which needs relatively high energy resource and computation power due to the high probability for allowing 3rd-party connection, however, the current standard specification would be limited in terms of energy distribution because it has not included a process to determine the role of GO. To address above problem, this paper classified considerable parameters into the general parameters for the physicality of devices and the specific parameters for considering the role position depending on use-case scenario, and proposed a new method called DIVA to help efficiently determining GO role from the member devices of Wi-Fi Direct network. Furthermore the effect of this mechanism was proved via simulation-based experiments.

• YAKHAK HOEJI
• /
• v.56 no.1
• /
• pp.48-54
• /
• 2012

Enviromental differences in gentamicin pharmacokinetics by using population pharmacokinetic methods were compared with 20 Korean patients and 24 Korean-American appendicitis patients. Two to six blood specimens were collected from all patients at the following times : just before a regularly scheduled infusion and at 0.5 hour after the end of a 0.5 hour infusion. Nonparametric expected maximum (NPEM) algorithm for population modeling was used. The estimated parameters were the elimination rate constant (K), the slope (KS) of the relationship between K versus creatinine clearance ($C_{cr}$), the apparent volume of distribution (V), the slope (VS) of the relationship between V versus weight, gentamicin clearance (CL) and the slope (CS) of the relationship between CL versus $C_{cr}$ and the V. The output includes two marginal probability density function (PDF), means, medians, modes, variance and CV%. The mean K (KS) were $0.402{\pm}0.129\;h^{-1}(0.00486{\pm}0.00197\;[h{\cdot}ml/min/1.73\;m^2]^{-1})$ and $0.411{\pm}0.135\;h^{-1}(0.00475{\pm}0.00180\;[h{\cdot}ml/min/1.73\;m^2]^{-1})$ for Korean and Korean-American populations, respectively. The mean V (VS) were not different at $14.3{\pm}3.6l(0.241{\pm}0.0511l/kg)$ and $15.1{\pm}3.84l(0.239{\pm}0.0492l/kg)$ for Korean and Korean-American populations, respectively (p>0.2). The mean CL (CS) were $5.68{\pm}1.69l/h(0.0714{\pm}0.0222l/kg[h{\cdot}ml/min/1.73\;m^2])$ and $5.70{\pm}1.77l/h(0.0701{\pm}0.0215l/kg[h{\cdot}ml/min/1.73\;m^2])$ for Korean and Korean-American populations, respectively. There were no enviromental differences in gentamicin pharmacokinetics between Korean and Korean-American appendicitis patients.

• YAKHAK HOEJI
• /
• v.39 no.2
• /
• pp.103-112
• /
• 1995

Population pharmacokinetics for gentamicin were compared with 24 American patients (16 male and 8 female) and 16 Korean-American appendicitis patients(12 male and 4 female). Two to six blood specimens were collected from all patients at the following times: just before a regularly scheduled infusion and at 1/2 hour after the end of a 1/2 hour infusion. Nonparametric expected maximum(NPEM) algorithm for population modeling was used. The estimated parameters were the elimination rate constant(K), the slope of the relationship between K versus creatinine clearance(KS), the apparent volume of distribution(V), the slope of the relationship between V versus weight(VS), gentamicin clearance(CL) and the slope of the relationship between CL versus creatinine clearance and the VS(CS). The output includes a 3-dimensional plot of the joint probability density function(PDF), two marginal PDF, means, medians, modes, variance, skewness, kurtosis, and CV%. The mean K(KS) were 0.424$\pm$0.139(0.00429$\pm$0.00164) and 0.411$\pm$0.135 hr$^{-1}$ (0.00475$\pm$0.00180[hr.mL/min/1.73m$^{2}]^{-1}$) for American and Korean-American populations, respectively. The mean V(VS) were not different at 15.6$\pm$4.77(0.233$\pm$0.0526) and 15.1$\pm$3.84L(0.239$\pm$0.0492 L/kg) for American and Korean-American populations, respectively (P>0.2). The mean CL (CS) were 6.28$\pm$1.85(0.0634$\pm$0.0191) and 5.70$\pm$1.77 L/hr(0.0701$\pm$0.0215 L/kg[hr.mL/min/1.73m$^{2}$)] for American and Korean-American populations, respectively. There are no differences in gentamicin pharmacokinetics between American and Korean-American Appendicitis patients.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.36-42
• /
• 1996

In this paper, we have proposed the robust estimation of HMM parameters which is based on CDDN(codeword dependent distance normalization)and codeword weighting by distance. The proposed method has used a distance normalization based on the characteristics of a codeword dependent distribution and have computed fuzzy contributions of codeword to a input vector with a fuzzy objective function. From experimental results, we have shown the effectiveness of the proposed method in that the correction rate of the proposed method is improved 4.5% over the conventional FVQ based method. Especially, the application of distance weighting to smoothing of output probability is improved the performance of 2.5% compared to distance based codeword weighting.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.128-137
• /
• 2018

In this paper, we propose a novel class separability measure for radar signals. To reduce the sensitivity of the relative aspect angle between a target and radar, to evaluate the discriminatory power of radar signals, the proposed method first calculates the correlation coefficients between two radar cross sections (RCSs) or linearly shifts one-dimensional (1D) radar signals (i.e., high-resolution range profiles (HRRPs)), or rotates two 2D radar signals (i.e., inverse synthetic aperture radar (ISAR) images). Then, it uses the maximum correlation coefficient when two radar signals are best aligned. Next, the proposed method obtains new correlation-based discriminant matrices (CDM) using maximum correlation coefficients. Finally, the cumulative distribution function (CDF) in the CDM and the value corresponding to the specific probability in the CDF are obtained, and this value represents the discriminatory power of the radar signal. Experimental results show that the proposed method can accurately measure the target separability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.604-611
• /
• 2017

In wireless sensor networks, an energy efficient operation is important since the energy of the sensors is limited. This paper proposes an energy efficient method that reduces a packet generation with Matrix Completion method where sensor value matrix has low-rank and decreases a collision rate and an overhead by transmitting only sensor ID to a time slot corresponding to the sensor value. Computer simulations demonstrates that the proposed method shows 17% of transmission failure and 73% of the packet generation compared to a conventional CSMA/CS. Delay time of transmitting information of the proposed method exhibits 22% of the CSMA/CA and the MSE error after reconstructing sensor values by Singular Value Thresholding(SVT) in Fusion Center is 87% of the CSMA/CA.