• Advances in concrete construction
• /
• v.9 no.3
• /
• pp.249-256
• /
• 2020

This paper aims at investigating the effect of crumb rubber size and content on compressive behaviors of concrete under axial compression. Concrete specimens are designed and produced by replacing natural aggregate with crumb rubber content of 0%, 5%, 10%, 15% and three different sized crumb rubbers (No. 20, No. 40, No. 80 crumb rubber). And the failure mode, compressive strength, elastic modulus, stress-strain curves, peak strain and ultimate strain are experimentally studied. Based on the test results, formulas have been presented to determine the compressive strength, elastic modulus, the relationship between prism compressive strength and cube compressive strength, stress-strain curves and peak strain of crumb rubber concrete (CRC). It is found that the proposed formulas agree well with the test result on the whole, which may be used to practical applications.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.279-289
• /
• 2017

In this study, a series of conjugate heat transfer (CHT) analyses are conducted for a stage of a fully cooled high-pressure turbine (HPT) at elevated levels of free stream turbulence (Tu = 5% and 25.7%). The goal of the analyses is to investigate the influence of high turbulence intensity on the fluid-thermal characteristics of a nozzle guide vane (NGV). The turbine inlet temperature is defined by considering a typical radial temperature distribution factor (RTDF). The Unsteady Reynolds Average Navier-Stokes (URANS) CHT simulations are carried out using CFX 15.0, a commercial CFD package. The presented CFD modeling approach for high turbulence intensity is verified with the experimental data from two types of NASA C3X NGVs with films. The computation grid is generated for both the fluid and solid domains. The fluid domain grid is created using a tetrahedral grid system with prism layers because of its complex geometry, and the solid domain grid is composed of only tetrahedral elements. The analytical results are compared to understand the effect of turbulence on flow characteristics and metal temperature distributions. The results obtained in this study provide useful insights on the effects of high free stream turbulence and unsteadiness. The results also lead to the proposal of meaningful turbine design guidelines.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.299-302
• /
• 2013

Methylenetetrahydrofolate reductase (MTHFR) has been reported to be associated with DNA methylation, an epigenetic feature frequently found in gastric cancer. We conducted a case-control study to explore the association of MTHFR C677T polymorphisms with gastric cancer risk and its relation with the DNA methylation of COX-2, MGMT, and hMLH1 genes. Genotyping of P16, MGMT and HMLH1 was determined by methylation-specific PCR after sodium bisulfate modification of DNA, and genotyping of MTHFR C677T was conducted by TaqMan assays using the ABI Prism 7911HT Sequence Detection System. Folate intake was calculated with the aid of a questionnaire. Compared with the MTHFR 677CC genotype, the TT genotype was significantly associated with 2.08 fold risk of gastric cancer when adjusting for potential risk factors. Individuals who had an intake of folate above $310{\mu}g$/day showed protective effects against gastric cancer risk. The effect of MTHFR C677T polymorphisms on the risk of gastric cancer was modified by folate intake and methylation status of MGMT (P for interaction <0.05).

• Journal of ILASS-Korea
• /
• v.5 no.1
• /
• pp.49-57
• /
• 2000

This study presents the flow visualization results, velocity and turbulence intensity measurements made within an air filter cover and entry region of a mass air flow sensor (MAFS) which is used in an induction system of 3.8L engine. Flow structure in two air filter cover assemblies were examined. The first was a clear plastic replica of the production cover while the second was a modified clear plastic cover with a geometry configured to reduce fluctuations. High speed flow visualization and laser doppler velocimetry (LDV) systems were used to reveal and analyze the flow field characteristics encountered in the sensor design process under steady flow conditions. A 40-watt copper vapor laser was used as a light source. Its beam is focused down to a sheet of light approximately 1.5mm thick. The light scattered off the particles was recorded by a 16mm high speed rotating prism camera at 5000 frames per second. A comparison of the flow patterns and LDV measurements in the original and modified air filter covers is presented to illustrate the controlling effect of the cover design on the turbulence structure formation near the bypass and on the sensor output signal. In both axial and radial planes of the main passage it was found that the turbulence flow pattern is remarkably influenced by the air filter cover and main passage configuration.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.25-31
• /
• 2001

The Talbot effect of an elongated circular (EC) grating composed of a line grating and two semicircular gratings with well matched pitches is experimentally presented. As the relative positions between the fixed EC grating and the moving Talbot image of another EC grating or a self Talbot image are one-dimensionally deformed, we can visually observe moire fringes generated by their superposition. Two examples of their applications, that is, the measurement of the wedged angle of a wedged prism and of the fine rotational angle of a mirror are described.cribed.

• Computers and Concrete
• /
• v.26 no.5
• /
• pp.451-465
• /
• 2020

This paper presents experimental and numerical investigations on mechanical properties of ultra-high-performance fiber-reinforced concrete (UHPFRC) with four types of steel fibers; micro steel (MS), crimped (C), round crimped (RC) and hooked-end (H), in two fiber contents of 1% and 2% (by volume) and two lengths of 13 and 30 mm. Compression, direct tension, and four-point bending tests were carried out on four types of specimens (prism, cube, dog-bone and cylinder), to study tensile and flexural strength, fracture energy and modulus of elasticity. Results were compared with UHPC specimens without fibers, as well as with available equations for the modulus of elasticity. Specimens with MS fibers had the best performance for all mechanical properties. Among macro fibers, RC had better overall performance than H and C fibers. Increased fibers improved all mechanical properties of UHPFRC, except for modulus of elasticity, which saw a negligible effect (mostly less than 10%). Moreover, nonlinear finite element simulations successfully captured flexural response of UHPFRC prisms. Finally, nonlinear regression models provided reasonably well predictions of flexural load-deflection behavior of tested specimens (coefficient of correlation, R² over 0.90).

• Korean Journal of Materials Research
• /
• v.12 no.4
• /
• pp.254-258
• /
• 2002

To realize channel cross-connecting in optical communications systems, a high speed optical matrix switch was fabricated using z-cut $LiNbO_3$. For switch fabrication was design bending structure and coupling length and four $2{\times}2$ directional couplers were integrated on one substrate far construction of a $4{\times}4$ switch. Single-mode optical waveguides were formed by Ti-diffusion at a wet $O_2$ atmosphere. Ti-diffusion profile, refractive index variation and waveguide morphology were analyzed by Prism coupler and optical microscopy, respectively.

• Journal of Sasang Constitutional Medicine
• /
• v.34 no.4
• /
• pp.49-56
• /
• 2022

Objectives The purpose of this study is to compare the changes before and after constitutional acupuncture treatment in soyangin who received embedding therapy for wrinkle improvement. Methods A retrospective study reviewing medical records was conducted. The patient was classified as a Soyangin by a specialist based on K-PRISM, personality, appearance, voice and usual symptoms. Records on the degree of wrinkles, postoperative symptoms, and patient satisfaction were reviewed. Results The patient's wrinkles were improved after the embedding therapy. After therapy symptoms were fever, flushing, and burning sensation. After acupuncture, these symptoms were reduced. Patient satisfaction increased after constitutional acupuncture treatment. Conclusion As a result of embedding treatment in Soyangin patients, there was an effect of wrinkle improvement. As a result of constitutional acupuncture treatment, anxiety and stress were reduced before the procedure, and symptoms of heat, burning, and flushing were reduced after the procedure.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.419-428
• /
• 2005

The aim of this study was to provide data for the relief of asthenopia during binocular vision by determining the characteristics of ocular function in adults. A total of 260 subjects were between the age of 19-35years. We measured individually the refractive error correction, pupillary distance, optical center distance, phoria, convergence, accommodation and the AC/A as well as the asthenopia during binocular vision using a questionnaire. After analysis of factors affecting asthenopia, we also examined the reductive effect of asthenopia in subjects who had asthenopia using prism. To determine the factors affecting asthenopia during binocular vision, statistic analyses were carried out the multivariate Logistic regression model. The results of this study were as follow. The asthenopia during binocular vision was found 26.9% of subjects. Multivariate logistic regression model was used to determine factors affecting binocular vision of myopia. When the accommodation and convergence were low compared to being high, when subjects had esophoria or there was more exophoria, and when AC/A was lower than the standard, the rate of asthenopia was higher. Therefore the accommodation, convergence and AC/A could be predictive factors for asthenopia. We used prism for subjects who had asthenopia during binocular vision, the results showed that the symptom of asthenopia was eased up to 74.3%.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.3
• /
• pp.243-251
• /
• 2016

Purpose: This study evaluates the effectiveness of intermittent exotropia vision training through follow up of average 3 years using proprioceptive test (Maindot test). Methods: 35 people (18 men, 17 women) with mean age of 13.48 (${\pm}2.45$) with corrected visual acuity of 0.9 or higher and normal binocular vision and control were observed for changes between before, after, and 3 years following the vision training during the period from 2005 to 2009. Results: After training, the correlation between the changed amount of deviation and PRC(diplopia) value and symptoms was not significant (p>0.05). However, it showed a statistically significant (p<0.001) correlation that change of the binocular proprioceptive sense abilities is decreased subjective symptoms. Conclusions: Binocular proprioceptive sense may be used in variety of purposes and applications such as predictive evaluation of binocular symptoms, binocular function performance evaluation after vision training and prism treatment.