• Korean Journal of Optics and Photonics
• /
• v.31 no.6
• /
• pp.321-327
• /
• 2020

We investigated the light reflection from thin films coated on substrates. Using a prism with a high refractive index as the incident medium, the phenomena of the total internal reflection (TIR) of the prism/film/substrate system and the light coupling into the optical waveguide formed by the air/film/substrate system were comprehensively studied and compared. If the refractive index of the thin film is greater than that of the substrate, within the TIR region of the substrate, sharp reflection minima occur at specific angles where the waveguide modes are excited, that can be used to accurately measure the refractive index and thickness of a thin film. On the other hand, if the refractive index of the thin film is smaller than that of the substrate, such waveguide modes do not exist. In this case, although not so distinct as a bulk medium, the TIR effect of the thin film is still observable, accompanied by an interference pattern. In this study we analyzed the overall reflection phenomena occurring from prism/film/substrate structures, to investigate the possibility of measuring the refractive index of a thin film in both cases.

• Clinical and Experimental Pediatrics
• /
• v.53 no.3
• /
• pp.323-328
• /
• 2010

Purpose : To verify the effect of hyperglycemia on mortality rates in critically ill children and to identify the blood glucose level that influences prognosis. Methods : From July 2006 to June 2008, a total of 206 patients who were admitted to the pediatric intensive care unit (PICU) at Asan Medical Center and who survived for more than 7 days were retrospectively reviewed. We analyzed the maximum glucose value within 7 days in PICU, PRISM-III score and SOFA score within 24 hours, and mortality. We did not perform an adjustment analysis of drugs affecting glucose level. Results : The maximum glucose level within 7 days in PICU was higher in the nonsurvival group than in the survival group. Using 4 cutoff values (125, 150, 175, and 200 mg/dL), the mortality of patients with hyperglycemia was found to be 13.0 %, 14.4%, 19.8%, and 21.1%, respectively, and the cutoff values of 175 and 200 mg/dL revealed significant differences in mortalities between the hyperglycemic and normoglycemic groups. The PRISM-III score was not significantly different between the hyperglycemic and normoglycemic groups under a glucose cutoff value of 175 mg/dL, but the SOFA score was higher in the hyperglycemic group. Under a glucose cutoff value of 200 mg/dL, the PRISM-III score was higher in the hyperglycemic group, and the SOFA score did not differ between the 2 groups. Conclusion : Hyperglycemia with a maximal glucose value ${\geq}175\;mg/dL$ during the first 7 days after PICU admission was associated with increased mortality in critically ill children.

• Structural Engineering and Mechanics
• /
• v.19 no.5
• /
• pp.567-580
• /
• 2005

Numerous tests on concrete structure members under local pressure demonstrated that the compressive strength of concrete at the loaded surface is increased by the confinement effect provided by the enveloping concrete. Even though most design codes propose specific criteria for preventing bearing failure, they do not take into consideration size effect which is an important phenomenon in the fracture mechanics of concrete/reinforced concrete. In this paper, six series of square prism concrete blocks with three different depths (size range = 1:4) and two different height/depth ratios of 2 and 3 are tested under concentrated load. Ultimate loads obtained from the test results are analysed by means of the modified size effect law (MSEL). Then, a prediction formula, which considers effect of both depth and height on size effect, is proposed. The developed formula is compared with experimental data existing in the literature. It is concluded that the observed size effect is in good agreement with the MSEL.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.2
• /
• pp.1-8
• /
• 2009

Purpose: The purpose of this study is to compare degrees of asthenopia in after wearing of dispensed reading glasses with different criterion of P.D. Methods: The person who has minus near correction power (distance correction value (-)) is compared to the degree of asthenopia by wearing of dispensed reading glasses with near P.D(-B) and distance P.D. The person who has plus near correction power is compared to degree of asthenopia by wearing of dispensed reading glasses with near P.D-B, distance P.D, near P.D-A. The "Near-P.D-A" means reduced optical centre distance of reading glasses of positive correction value at which the same effect of prism B.O through near visual point in distance glasses exist at near visual point in reading glasses. Results: When near correction value is (-), dispensed reading glasses with distance P.D have caused less asthenopia than dispensed glasses with near P.D-B. When the near correction value is (+), we cannot confirm that which P.D is more useful for reading glasses. As a result of this study, dispensed reading glasses with near P.D-A have caused less asthenopia than another criterion of P.D. Conclusion: The effect of prism B.I through a near visual point in distance glasses ((-) correction value) reduce convergence demand. Therefore (-) correction value-reading glasses support convergence in near vision, because the effect of prism B.I of reading glasses is smaller than that of distance glasses. When the near correction value is (+), centration points can be determined by one of near P.D-A, near P.D-B, distance P.D.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.563-568
• /
• 2004

The high temperature proton exchange (HTPE) method was used to fabricate optical waveguides based on LiNbO$_3$, which gives rise to low propagation loss and high polarization extinction ratio. To characterize the refractive index distribution of the fabricated waveguides, the guided modes of each waveguide were observed using the prism coupling method and then the refractive index profile was calculated by the inverse WKB method with the least square fitting. Finally, we showed how the HTPE parameters such as the temperature of PE, the concentration of lithium additive, and the time of PE effect the refractive index profile.

• Korean Journal of Crystallography
• /
• v.7 no.2
• /
• pp.183-190
• /
• 1996

Single crystals of ZnO were grown hydrothermally with KOH solution in silver lined autoclave. The effect of LiOH and NH4OH on the morphology of as-grown crystals was studied. As-grown crystals were pale green and the maximum size was 30×30×20mm3. Addition of LiOH reduced the density of flaws on the (0001) face of as-grown ZnO crystals. In highly concentrated KOH solution, ZnO had a strong tendency to grow along the c-axis. When 1.0-2.0 M of NH4OH was added into mineralizer, growth rate along the direction of a-axis increased. From this result, ZnO single crystals of equant-faced hexagonal prism could be grown with acicular seeds.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.285-288
• /
• 2003

The compressive strength of concrete is used as the most fundamental and important material property when reinforced concrete structures are designed. It has been problem to use this value, however, because the control specimen sizes and shapes are different from every country. In this study, the effect of specimen shapes and sizes on compressive strength of concrete members was experimentally investigated based on fracture mechanics. Experiments for the mode I failure was earned out by using cylinder, cube, and prism specimens. The test results are curve fitted using least square method(LSM) to obtain the new parameters for the modified size effect law(MSEL). The analysis results show that the effect of specimen sizes and shapes on ultimate strength is apparent. The results also show stronger size effect in member when the casting direction is perpendicular to loading direction

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.118-119
• /
• 2004

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.195-196
• /
• 2011

• Structural Engineering and Mechanics
• /
• v.62 no.1
• /
• pp.97-106
• /
• 2017

This paper discusses an experimental programme that was carried out to study the effects of specimen size-shape and type of moulds on the compressive strength of concrete. For this purpose, cube specimens with 150 mm dimensions, cylinder specimens with $150{\times}300mm$ dimensions, and prism specimens with $150{\times}150{\times}375mm$ dimensions were prepared. The experimental programme was carried out with several concrete compositions belonging to strength classes C20/25, C25/30, C30/37, C40/50 and C60/75. Furthermore, the test results were curve-fitted using the least squares method to obtain the new parameters for the modified size effect law.