• Journal of the Korean Ceramic Society
• /
• v.28 no.9
• /
• pp.721-729
• /
• 1991

SnO2-TiO2(Pt or Pd), as raw material for hydrocarbon gas sensors, was prepared by a coprecipitation method. The SnO2-TiO2-based thick film gas sensors were made by screen printing technique. The titanium dioxide synthesized was shown to be anatase structure from XRD peaks and was transformed to rutile structure between 700$^{\circ}C$ and 1000$^{\circ}C$. Titanium dioxide in SnO2-TiO2 thick films devices plays a very important role in the enhancement of the sensitivity to CH4 and C4H10. In the case of SnO2-TiO2(Pt) sensors, titanium dioxide that was rutile structure enhanced the sensitivity of the thick film to CH4. Platinum added to the raw powder at coprecipitation (as chloroplatinic acid VI hydrate) improved the gas sensitivity to hydrocarbon gases. Therefore, it is expected that the SnO2-TiO2(Pt) thick film sensors fabricated in this experiment could be put into practical use as LPG (primary component : C4H10 and C3H8) and LNG (primary component : CH4) sensors.

• Journal of Information Display
• /
• v.7 no.2
• /
• pp.22-25
• /
• 2006

This paper presents heating process for obtaining standing carbon nanotube emitters to improve field-emission properties from the screen-printed multiwalled carbon nanotube (MWCNT) films. In an atmosphere with optimum combination of nitrogen and air for heat treatment of CNT films, the CNT emitters can be made to protrude from the surface. This allows for high emission current and the formation of very uniform emission sites without special surface treatment. The morphological change of the CNT film by this technique has eliminated additional processing steps, such as surface treatment which may result in secondary contamination and damage to the film. Despite its simplicity the process provides high reproducibility in emission current density which makes the films suitable for practical applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.226-226
• /
• 2010

The effects of paste components on the properties of porous $TiO_2$ film electrodes prepared through screen-printing technique were investigated in order to efficiently control and optimize the main fabrication step of the dye-sensitized solar cells (DSC). The screen-printed porous $TiO_2$ films were characterized by ultraviolet-visible (UV-Vis) spectroscopy and scanning electron microscopy (SEM), and applied as a part of the DSC for the energy conversion. The fabricated DSC were evaluated by a solar simulator. The experimental results indicate that the microstructural characteristics of the printed films and the performances of the DSC are dependent on the paste compositions. As a result that the efficiency of DSC prepared by manufactured paste was 0.5%~1% higher than existing paste.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.2
• /
• pp.71-75
• /
• 2015

To overcome limitations of conventional diagnosis and planning for orthognathic surgery, surgeons have begun to use 3-dimensional (3D) virtual simulation to plan complex orthognathic surgery. In many literatures, it has shown that better surgical outcome achieved with 3D virtual simulation than that with conventional methods. But, there is still lack of data about accuracy of maxillary segmental surgery with 3D virtual simulation. The purpose of this paper was to report the case of maxillary segmental orthognathic surgery with 3D virtual simulation and to assess the actual surgical outcome. Though the result was clinically acceptable, discrepancy between 3D simulation and actual surgery was not superior compared with conventional method. The accuracy of 3D simulation surgery and intermediate wafer fabrication for maxillary segmental surgery needs to be improved. Advancement in 3D software program and careful surgical technique will make it more precise and reliable method.

• Journal of the Korean Society of Costume
• /
• v.45
• /
• pp.161-178
• /
• 1999

In contemporary fashion metal have used which is as the material with a sufficient potentiality of expression which is displayed by an unique characteristic involved only in metal. In this paper metal expressed in contemporary fashion is researched. The first thing the formative characteristic of metal is researched under the consideration of type technique and color of metal used in contemporary fashion. Metals such as gold silver bronze aluminum thin lead and iron are usually used in fashion and those metals are used in various types such a thread fabric board leaf a and cable. Those types of metal as above are applied to the clothing by the techniques of weaving embroidering metal leaf printing or moulding which gives the formative characteristic to the clothing. In color metal has an effect on the colors of surroundings by its smooth and unique luster and its effect of reflection and produces the visual formative characteristic through the effects of contrast. The esthetic will of metal expressed in modern fashion is researched in this study under the facts studied as above. first metal expresses the future oriented esthetic Second metal has the characteristic of attracting the attention Third metal is used as valid techniques to express the artistic formation for clothing escaping from the idea that the clothing is only for wearing. Finally metal is used as an anti-cultural tool of fighting against the existing order or spirit.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.4
• /
• pp.219-224
• /
• 2006

Silver paste with low sintered temperature has been developed in order to apply electronic parts, such as bus electrode, address electrode in PDP (Plasma Display Panel) with large screen area. In this study, nano-sized silver particles with 10-30 nm were synthesized from silver nitrate ($AgNO_3$) solution by chemical reduction method and silver paste with low sintered temperature was prepared by mixing silver nanoparticles, conventional silver powder with the particle size 1.6 um and Pb-free frit. Conductive thick film from silver paste was fabricated by screen printing on alumina substrate. After firing at $540^{\circ}C$, the cross section and surface morphology of the thick films were analyzed by FE-SEM. Also, the sheet resistivity of the fired thick films was measured using the four-point technique.

• Journal of the Korean Society of Costume
• /
• v.59 no.4
• /
• pp.41-53
• /
• 2009

This study analyzed expression types of dot patterns and derived out inherent characteristics to provide fundamental resources for advancement of high value added creative designs. As a result of the study, Firstly, the circular motive was used to form silhouettes or as a symbol of a decoration. Secondly, a simple form and color dot pattern was used to create one side, or a circular shaped accessory was used to be recognized as a construction line or a decoration line. Thirdly, textile printing is mainly used but handicraft and decorative images were used to add vitality through piece technique, embroidery, collage, cut-out, patch work, etc. Fourthly, different circular motives were integrated, partitioned and duplicated for abstract geometrical images. Fifthly, variations were added by mixing different dot patterns that are arranged regularly and irregularly in different sizes and gaps creating compounded designs with handicraft touches, different angles or on top of each other. Sixthly, hybrid images were created with rearrangement of dot patterns and by adding floral shapes, stripes or other abstract and geometrical shapes. Such various and creative attempts construct new formative beauty in fashion design and I believe that it can establish the development of unique images that satisfies the taste of today's consumers.

• Korean Journal of Human Ecology
• /
• v.15 no.2
• /
• pp.303-316
• /
• 2006

The present study deals with developing a new modem design of quilt which is characteristic of Korean traditional patterns. The goal of this study is to make some samples of the pattern as a basic motive of quilt work by using some Korean traditional patterns that could be found in roof tiles, windows, Neung-Hwa (a kind of wood cut for printing book covers), and others. This study examines the concept of quilts, their historical background, and their characteristics. This study also examines traditional patterns that are applicable to the patchy work of quilt, discussing the characteristic of both the Korean patterns and Nubi (Korean traditional quilt). In the process of pattern development, the original patterns were simplified and transformed to apply them to the modem quilt pattern. Fabrics (100% cotton) of similar colors were used to emphasize quilting lines. This study has found followings; 1) The geometric pattern usually consists of dots, lines, and faces. These patterns are suitable for pieced quilts. 2) The curvilinear pattern found in roof tiles or Yi-Dynasty coins, can be easily re-expressed by the applique technique. Combinations of fabrics and motive compositions can express quilts in realistic and creative ways. 3) Addition of Korean traditional quilt techniques, such as parallel lines or swastika stitches, to the traditional object-derived quilt patterns led to the creation of images close to the already existing Korean quilt, Nubi.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.5
• /
• pp.393-399
• /
• 2016

In this study, an experiment was conducted using a 3D scanner, commonly used in reverse engineering techniques, and the newly introduced CT measuring machine. The hole, width, and angle of specimens having various shapes were designated, the error rates in dimensional modelling generated during scanning with each device were compared, and the models were printed using a 3D printer. A secondary comparative analysis of the two printed specimens was conducted; the causes of dimension errors that occur during the printing process after scanning with each device and the differences associated with variation in shape were also analyzed. Based on the analysis results, the featured shape for each scanning application method and issues to consider in reverse engineering were presented, and the use of the CT measuring machine was recommended as a method to minimize error rates in dimensions and ensure efficient reverse engineering.

• Journal of Fashion Business
• /
• v.5 no.1
• /
• pp.131-144
• /
• 2001

The purpose of this study is to examine the type of stitch and designs of knitwears using handcraft ornament techniques. This paper will also go on to develop and merchandize high value generated by design development. Knit is largely divided into weft knit stitch and warp knit stitch which are respectively woven by weft knitting machine and warp knitting machine. For clothing, circular knit and flat knit are frequently used while plain stitch, rib stitch and purl stitch are perceived as the basic stitches. Denbigh stitch, cord stitch, atlas stitch, which belong to tricot stitch, are the basic of warp knit stitch. There are also numerous fancy fabrics adapting the previously mentioned stitches and these are made into solid pattern and yarn dyed pattern. The handcraft ornament techniques in knitwears design are embroidery, beads, sequin, stone, printing, applique and fringe, etc. By applying these techniques thus creative expression, which cannot be expressed in other fashion items, is feasible. The women's knitwears are tries by mixed and various techniques, develope to high value knitwears, escaping from simple and practical items.