• 한국생활과학회지
• /
• 제15권2호
• /
• pp.303-316
• /
• 2006

The present study deals with developing a new modem design of quilt which is characteristic of Korean traditional patterns. The goal of this study is to make some samples of the pattern as a basic motive of quilt work by using some Korean traditional patterns that could be found in roof tiles, windows, Neung-Hwa (a kind of wood cut for printing book covers), and others. This study examines the concept of quilts, their historical background, and their characteristics. This study also examines traditional patterns that are applicable to the patchy work of quilt, discussing the characteristic of both the Korean patterns and Nubi (Korean traditional quilt). In the process of pattern development, the original patterns were simplified and transformed to apply them to the modem quilt pattern. Fabrics (100% cotton) of similar colors were used to emphasize quilting lines. This study has found followings; 1) The geometric pattern usually consists of dots, lines, and faces. These patterns are suitable for pieced quilts. 2) The curvilinear pattern found in roof tiles or Yi-Dynasty coins, can be easily re-expressed by the applique technique. Combinations of fabrics and motive compositions can express quilts in realistic and creative ways. 3) Addition of Korean traditional quilt techniques, such as parallel lines or swastika stitches, to the traditional object-derived quilt patterns led to the creation of images close to the already existing Korean quilt, Nubi.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.9-16
• /
• 2018

Recently, the demand for eco-friendly parts has increased to reduce materials and parts that use fossil fuels. This has exacerbated the increase of energy prices and the enforcement of regulations by environmental agencies. Currently, polylactic acid (PLA) is a solution, as a common and eco-friendly material. PLA is a biodegradable material that can replace traditional petrochemical polymers. PLA has great advantages since it is resistant to cracking and shrinkage. When it is manufactured, there are few harmful byproducts. Improvement in the brittleness characteristics is another important task to be monitored throughout the production of industrial parts. Improvement in the brittleness property of products lowers the tensile strength and tensile elasticity modulus of the parts. This study focused on the mechanical properties of 3D-printed PLA parts. Tensile tests are performed while varying the infill print parameters to evaluate the applicability of PLA in several industrial areas.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.260-261
• /
• 2005

The heterolayered thick/thin structure consisting of $Pb(Zr_{0.52}Ti_{0.48})O_3$ and $BaTiO_3(BT)$ were fabricated by a sol-gel process. PZT powders, prepared by the sol-gel method, were mixed with an organic vehicle and the PZT thick films were fabricated by the screen printing techniques on alumina substrate with Pt electrodes. The microstructural and dielectric characteristics of the stacked heterolayered PZT/BT/PZT films were investigated by varying the number of coating $BaTiO_3$ layers. The existence of a $BaTiO_3$ layer between the PZT thick films of the tri-layer $Pb(Zr_xTi_{1-x})O_3/BaTiO_3/Pb(Zr_xTi_{1-x})O_3$thick/thin/thick film can greatly improve the leakage current properties of the PZT thick films. The average thickness of a PZT(5248)/$BaTiO_3$ heterolayered thick/thin film was 25$\mu$m. The relative dielectric constant and dielectric loss of the PZT(5248)/$BaTiO_3$-3 heterolayered thin film coated three times were 1087 and 1.00% at 1[MHz].

• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.153-163
• /
• 2019

This study is designed to present a direction for the development of an up-cycling design applied with Hangeul calligraphy on outdated clothing materials, and recreating them as eco-friendly high value-added cultural products. The results of this study are as follows. First, Hangeul calligraphy enhances creativity and scarcity by expressing an unformatted analog sensibility in the digital era and further emphasizes the differentiated high value-added aspect of the products. Second, the characteristics of the up-cycling design products represent eco-friendliness, handcrafting, non-fabrication, originality, scarcity, storytelling, and customization. Third, the author made 11 up-cycling cultural products using Hangeul calligraphy, applying it to discarded jeans and pieces of cloth. Fourth, the phases of making cultural products are divided into planning and production. In the planning phase, items and materials are decided upon, design sketches are made, and in the production phase the items go through partial dismantlement, separation, reconstruction, collaboration, and the application of calligraphy printing. Along with the beautiful and lyrical sensibility of Hangul, it was shown that up-cycling using Hangeul calligraphy, which has excellent originality and practicality of design, can be expanded to a variety of cultural products.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.147-150
• /
• 2002

A light guide panel is an element of the LCD backlight module that is often used for the display of compact electronic devices. In this study, a laser marking system is proposed to fabricate light guide panel, which can be replaced of other manufacturing methods such as silk printing, stamping, and v-cutting methods. The objectives of this research are the establishment of laser marking system, evaluation of laser marking parameters, understanding marking process, application to PMMA, reliability test and quality inspection. A 50W $CO_2$ laser (CW) was used to perform different experiments in which, the influence of some processing parameters (average power, scanning speed) on the geometry and quality of groove pattern was studied. The width of the etched grooves increases with increasing a laser power and decreasing a scan speed. In order to analyze surface characteristics and optical properties (luminance, uniformity), SEM photography and BM7 (luminance measuring system) were used. As a result, the optimal conditions of the process parameters were determined.

• 센서학회지
• /
• 제14권4호
• /
• pp.258-264
• /
• 2005

Li+-ion conducting ($Li_{3}PO_{4}$) thin films with thickness of $0.3{\mu}m$, $0.65{\mu}$, $1.2{\mu}$ were deposited on $Al_{2}O_{3}$ substrate at room temperature by thermal evaporation. They were sintered at $700^{\circ}C$ and $800^{\circ}C$ for 2 hours, respectively. Reference electrode and sensing electrode were printed on Au-electrode by silk printing method. The EMF and the ${\Delta}EMF$/dec were increased with increasing the electrolyte thickness and sintering temperature. The sample sintered at $800^{\circ}C$ was shown a good response and recovery characteristics more than those sintered at $700^{\circ}C$. The Nernst's slop of 75 mV per decade was obtained at operating temperature of $500^{\circ}C$.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.21-21
• /
• 2018

다양한 소재(금속, 세라믹, 고분자 소재 등)들이 3차원 형상기반 적층제조법에 적용되고 있는데, 금속 소재를 이용하여 3D 프린팅 법으로 치과용 수복물을 제조하는 연구가 많이 보고되고 있다. 하지만, 티타늄 또는 티타늄 합금 분말을 이용하여 3D 프린팅 법으로 제작한 치과용 보철물에 관한연구 보고는 많지 않다. Kanazawa 등 (2014)은 Ti-6Al-4V 합금분말을 이용하여 SLM법으로 총의치 용 framework를 제작하여 주조법으로 제작한 것과 비교 평가하였고, Mangano 등(2013)은 Ti-6Al-4V 합금분말로 지름이 작은 일체형 (1-piece narrow-diameter) 임플란트를 SLS법으로 제작하여 16명의 환자에게 식립한 다음, 2년간 관찰하였고, Mangano 등 (2014)은 cone-beam computed tomography (CBCT) data를 3D이미지로 변환시켜 DLMS법으로 치근 형상의 임플란트를 제작하여 15명의 환자에게 식립한 다음, 1년간 관찰하였다. 또한 서울대학교 및 연세대학교 치과생체재료과학교실 (2016)에서는 3D 프린팅 법으로 제작한 티타늄 시편과 기계 가공한 티타늄 시편의 물성을 비교하였다. 그러나 티타늄 합금 분말을 이용하여 3D 프린팅 법으로 제작한 치과용 보철물을 실제 임상에 적용하는 단계에서 기존 기계가공 방식으로 제작한 티타늄 보철물과 3D 프린팅 법으로 제작한 티타늄 보철물의 물성과 표면특성을 다양하게 비교 평가하는 것이 필요하여 본 연구에서는 3D 프린팅 법으로 제작한 티타늄 시편과 기계 가공한 티타늄 시편의 물성특성과 표면특성을 비교하여 조사하였다.

• 대한가정학회지
• /
• 제50권5호
• /
• pp.39-49
• /
• 2012

This study looked into the trend of expression of animal motifs that appears in modern fashion, and the values embedded in them. As to the research method, empirical analysis was performed on the works presented at the four global collections of Paris, Milan, New York and London from 2001S/S to 2010F/W, as well as a literature review. As a result, animal motifs applied in modern fashion appeared in material groups, such as leather or feather. The first group shows a realistic material feel, with artificial leather or fur, expressed in a transformed complex animal motif, with process skill or various methods of expression. The second group is the case of a single motif or reality, mode, and ion pattern. Printing is a generic expression, but patchwork, collage or bead ornament are also used, and expressed in the various forms of pattern: pattern in a single animal, pattern in different animals, and pattern combining both animal and other shape. The third group is a small decorative ornament, including headset or accessory and makeup, which is transformed in an animal-characterized motif into part of clothing components for expression, or to set the real animal to the stage for a performance. The embedded values were also categorized as natural beauty, sensual female beauty, pleasure, and ornamentation, which could be an endless spiritual source, and a breakthrough that enables us to show a creative and new aesthetic for the modern fashion field.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1322-1326
• /
• 1999

In2O3 thick film gas sensor for detecting NOx gas of high concentration was fabricated by a screen printing technique. This work focussed on investigation of the change of sensitivity to NOx gas with firing temperatures of sensing layer and on improvement of the sensitivity by adding catalysts such as Al,. Ru, and SnO2 The cross sensitivites of sensor to CO, H2, CH4 and i-C4H10 gases were also examined under NO2 gas concentration of 200ppm Pure In2O3 gas sensor prepared at a firing temperature of 50$0^{\circ}C$ showed a maximum sensitivity to NOx gas at the operating temperature of 40$0^{\circ}C$ Al(0.004 wt%)-In2O3 sensor largely improved the sensitivities to both NO2 and NO gas and showed a superior selectivity compared with other gas sensors.

• Safety and Health at Work
• /
• 제11권1호
• /
• pp.71-79
• /
• 2020

Background: Protection from yellow dust and particulate matter is ensured by the use of respirators among the Korean citizens and workers. However, the manikins used to test the performance of the same were manufactured considering western facial specifications owing to which they do not represent Korean facial characteristics. Methods: Analysis of the data from the 6th 3D anthropometric survey of Koreans (Size Korea; 2010-2013) of 4,583 people aged 7 to 69 years was performed to obtain their facial dimensions. We subsequently clustered 44 facial measurements using Design X software, followed by the creation of the cluster centroid. Results: Three 3D head forms were developed-small, medium, and large, and their images were stored in ".stl" format for 3D printing. The facial widths and lengths of the three head forms were 127.1 mm × 90.6 mm, 143.2 mm × 104.0 mm, and 149.1 mm × 120.2 mm, respectively. Conclusion: We developed manikin head forms according to the facial dimensions of the Korean population, which was essential in evaluating respiratory protective equipment. These head forms can be used to test the performance of respirators considering the facial dimensions of the Korean population.