• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.57-64
• /
• 2012

When papers each made with sea-algae pulp 1%, 5% and soft, hard wood pulp were aged for 12days. Paper made with soft wood pulp is 30% loss of folding endurance, made with hard wood pulp is 50% loss of folding endurance. On the other, papers each made with 9% sea-algae pulp and soft, hard wood pulp were 18% loss of folding endurance. In the aging test of paper made with different freeness paper made with 300ml CSF, is more effective than 400ml CSF, 500ml CSF.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3413-3416
• /
• 2012

Phenol-free resin was synthesized and its printing ink properties were investigated. The phenol-free resin was produced by esterification of poly phthalate and Diels-Alder adduct of rosin anhydride. Compared to rosin modified phenolic resin, eco-friendly phenol-free resin showed better vehicle properties in terms of gloss, yellowing, runability, and storage stability. The results suggest the utility of phenol-free resin instead of conventional rosin modified phenolic resin.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.1-6
• /
• 2006

The increasing use of newsprints in the media and an advertisement have brought the needs to improve the printing quality of the advance full-color newspaper. The printability coefficients used in this research such as Ymax for the density and Tollenaar's density smoothness constant value $\ulcorner$m$\lrcorner$ were introduced early in Europe and have been in use to control printing quality. In order to improve printing quality of domestic full-color newsprints, those printability coefficients could be used to control printing quality. This study was carried out to measure the printability coefficients of domestic full-color newspapers. Four kinds of domestic newspapers and two kinds of newspaper printing inks were tested by IGT printability tester. The printed density smoothness coefficient $\ulcorner$m$\lrcorner$ value showed good results when the samples have low porosity and roughness. The printability coefficients obtained are expected to be useful to the korean newspaper printing industry.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.648-650
• /
• 2008

We used micro-contact printing for source and drain electrodes of OTFTs. The proper solvent of Ag paste and baking temperature were extracted for PVP gate dielectric and pentacene semiconductor. The mobility was 0.025 cm2/V.sec and on/off ratio was $2{\times}10^5$.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.27 no.1
• /
• pp.107-118
• /
• 2009

The printing industry is getting more digitalized and integration. It has enabled the interactive information and networking from Pre-Press, Press, to the Post-Press. These are efficient management and the improved process and productivity are getting more important. Such trends improved in the functionality and automation. This paper tries to find out how technology for CIP3/4-based process may be applied and resolved. Such subject includes the domestic and international cases regarding each manufacturer's CIP3/4 technology types. Another purpose is to emphasize on the needs to establish the environment. Under this environment, it is possible to integrate network in exchangeable form through JDF standard format after CIP3/4. Based on the data from this study, it is expected to collect further substantial data which is related to the domestic printing company's CIP4 operation. It will be also possible to perform subsequent studies on the proper variables of the market segment. CIP4 stands for "International Cooperation for Integration of Prepress, Press and Post-press, it is an association of around forty international companies, mostly manufacturers of prepress, press and post-press, as well as suppliers and users. In this paper, we studied on the acting application of CIP4 workflow.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.85-93
• /
• 2007

The printed mottle is recognized as the most common printing problems in using coated paper and one of the most difficult problems to solve in offset printing. Printed mottle is caused by an uneven penetration of ink into the paper and binder migration. The prevention of printed mottle requires of coating color formation, especially the minimum of binder migration. Printing worked by interaction of printing ink, coated paper and printing pressure. In this study, we investigated the effect of the properties changing of coated paper and printing conditions such as ink dispersion, nip condition and amount of ink transfer.

• Korean Journal of Health Education and Promotion
• /
• v.24 no.4
• /
• pp.99-114
• /
• 2007

Object: To analyze the effect of a media-campaign for "walking exercise participation improvement", which impacted walking-related awareness and behavior change of residents in Seoul. Method: This study used three campaign media including printing information, walking exercise indication board and a public advertisement of cable TV to lead a walking-related awareness change and practice frequency(number of days per week walking) and time(minutes per day walking) of walking exercise. To evaluate the exposure and message-recall levels of a campaign and effects of awareness change and walking practice, this study used a questionnaire survey(N=377). Result: 1) Group of exposure to campaign more participate and had the higher frequency(p=.015) and time(p=.023) in walking exercise and in comparison with group of nonexposure. 2) Group of changed awareness to campaign more participate and had the higher frequency and time in walking exercise and in comparison with group of no changed perception(p <.05). 3) Level of message recall of ${\ulcorner}$printing information${\lrcorner}$ was associated with number of days per week walking, and level of message recall of ${\ulcorner}$public advertisement of cable TV${\lrcorner}$ was associated with minutes per day walking at a statistically significant level(p <.05). Conclusion: These results suggest that media campaign can enhance the success of community-based efforts to promote awareness change and walking practice.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.59-70
• /
• 2011

Even though we could not count the total amount of plates in Korean printing industry per year, we would suppose the total amount of plates about $20,000km^2$ to $22,000km^2$ per year through our printing experience. On the standard of the end of 2010, it would be the market share of plates are that CTP plate is $9,000km^2$, CTcP plate is$4,000km^2$ and PS plate is $9,000km^2$, such as total amount of plates are $22,000km^2$. When there was no installed CTP setter in Korea, the domestic plate would be over 60% market share of plate in Korean printing industry. But now it would be less than 25% market share of plate. It is necessary to develop domestic CTP thermal plate from now because we have to keep the market share of domestic plate. On the study of the surface structure of substrate, roughness, anodized layer amount and coating amount between domestic CTP thermal plate and foreign CTP thermal plate, it would be the basic to develop domestic CTP thermal plate.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.3
• /
• pp.33-47
• /
• 2017

The purpose of this study is to provide fundamental data for the development of new course on 3D printing in the fashion design department. In order to investigate the perception of and educational needs in 3D printing, the data were collected from 266 students (female 68.8%, male 31.2%) majoring in fashion design aged 18-25 living in the capital area. The results of this survey showed that when investigating perceptions of 3D printing, it was found that 68.8% of answerers had indeed heard of 3D printing. Regarding the path they came to know about 3D printing, mass media such TV was the most frequent answer (54.6%). On the other hand, to the question asking about their intention to take the subject if given, approximately 71% said "Yes". Also, if a modeling class were given, the division that they wanted to explore most in the fashion industry was fashion jewelry. Finally, to the question asking interest in starting a business, 71.1% answered that they had interest. Out of those that answered that they had interest, when questioned about in which field they wanted to start a business, the most frequent answer was fashion online shopping mall. Finally, NCS-based 3D printing courses were suggested in the Fashion Design area. As 3D printing techniques are actively applied to the fashion industry overseas, creative education is needed through the integration of fashion and 3D printing technology by introducing 3D printing related programs in colleges.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.29-44
• /
• 2007

The printing industry is getting more digitalized and integration. It has enabled the interactive information and networking from Pre-Press, Press, to the Post-Press. These are efficient management and the improved process and productivity are getting more important. Such trends improved in the functionality and automation. This paper tries to find out how technology for CIP3/4 -based process may be applied and resolved. Such subject includes the domestic and international cases regarding each manufacturer's CIP3/4 technology types. Another purpose is to emphasize on the needs to establish the environment. Under this environment, it is possible to integrate network in exchangeable form through JDF standard format after CIP3/4. Based on the data from this study, it is expected to collect further substantial data which is related to the domestic printing company's CIP 4 operation. It will be also possible to perform subsequent studies on the proper variables of the market segment. CIP4 stands for "International Cooperation for Integration of Prepress, Press and Post-press, it is an association of around forty international companies, mostly manufacturers of prepress, press and post-press, as well as suppliers and users. In this paper, we studied on the acting application of CIP4 work flow.