• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.50-55
• /
• 1998

A thermal printing head is used for heat transcription printing of facsimile or printer. The thermal printing head has multilayered thin films and heaters lined up. Thermal analysis of thermal printing head is important for a design of thermal printing head. Since the heating charateristics of thermal printing head is dependent on the thermal conductivities of multilayerd material, this study made numerical analysis for three dimensional transient heat conduction in mutilayered films by the finite difference method and investigated the effect of various thermal conductivities of thin films. The results of this study will be used to design thermal printing head and select the materials for thermal printing head.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1394-1399
• /
• 2007

Recently, Study of 3D freeform fabrication method was working in the various applications. For example, in the powder base, it's laminated using a binding method or laser sintering method. However, these methods are not suitable in the office environments because it dust with powder that is bad for health. In this paper, we introduce a method of 3D freeform fabrication using a curing of photo-polymer resin and construct a system has multi printing head. A photo-polymer curing method has simply fabrication process and high strength of manufacturing part. However, this method has a problem on the multi print-head system. Because multi-printing system has a other printing method compare with a single printing system. Therefore, we experiment a single head 3D printing and proposed a 3D printing method using a multi-piezo head.

• 대한안전경영과학회지
• /
• 제25권2호
• /
• pp.153-158
• /
• 2023

This research was conducted to reduce the defect rate caused by nozzle clogging of printing heads used in binder jet 3D printers. The binder jet 3D printing technology may adhere to the printing head nozzle by dispersing powder due to mechanical operation such as transferring the printing head and supplying powder, and may cause nozzle clogging by natural curing at the nozzle end depending on the type of binder used. To solve this problem, this study created a cleaning module exclusively for printing heads to check whether the durability of printing heads is improved through analysis of printing results before and after using the cleaning module. To this end, this research used a thermal bubble jet printing head, and the used powder was studied using gypsum powder.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.75-76
• /
• 2010

• 한국CDE학회논문집
• /
• 제22권2호
• /
• pp.215-221
• /
• 2017

This paper describes a method of precise estimation for printing time and material consumption which are directly related to the 3D printing cost. Printing process and head motion of 3D printers using digital printing head, which is analyzed by its digitized steps, is rapidly simulated without slicing to calculate estimated printing results. Using this method, printing time and material usage of 3D printer were estimated quickly and precisely and compared to the real printing result. Applying compensation using the printing parameters, transferred from the 3D printer to the printing estimation system, even more accurate estimation is achieved. This method is used in the 3D Sprint software.

• 융합정보논문지
• /
• 제10권10호
• /
• pp.47-52
• /
• 2020

일반적인 평판 프린터 시스템은 PC와 전용 S/W로 구성되어 사용에 불편함이 존재한다. 결국, 평판 프린터 시스템 구성의 간소화, 스마트화 등을 통해 다양한 형태의 프린팅을 쉽고 편리하게 사용할 수 있는 기술이 필요하다. 즉, 한 대의 프린터로 여러 종류의 소재에 인쇄가 가능하며, 다양한 형태의 상품을 인쇄할 수 있는 다입체 프린터에 대한 수요가 증가하고 있다. 따라서, 본 논문에서는 Head Encoder/Trigger 제어를 이용하여 다입체 인쇄가 가능한 평판 프린터 시스템을 개발하였다. 이를 위해, 평판 프린터 내부 모듈을 입력 형태 감지 센서를 연계시키고, 별도의 메인 콘트롤러를 통해 프린터의 Head Encoder와 Head Trigger 신호에 의해 모든 동작 상태를 제어하는 평판 프린터를 개발하였다. 이를 통해, IoT 기술의 발전 및 보급의 확산으로 산업 전반에 걸쳐 스마트 환경의 프린터 제어가 발전된 형태로 확대될 것이며, 향후 3D 프린팅 산업 발전에 기여할 것으로 기대된다.

• 문화기술의 융합
• /
• 제9권5호
• /
• pp.529-534
• /
• 2023

고속 및 대면적 인쇄를 위한 라인 프린팅 기술은 늘어난 헤드 길이만큼 헤드 내부로 잉크를 공급하는 유로를 확보해야 하는 구조적 취약점과 제조 과정에서 발생하는 잔류응력에 의한 피드홀 변형으로 인해 노즐층이 파손되거나 잉크가 누출되는 결함이 있다. 따라서 본 논문에서는 견고하고 신뢰할 수 있으며 라인 프린팅 방식에 보다 적합한 열전사 방식의 잉크젯 프린트 헤드 형상을 제안하고자 한다. 먼저 실험을 통해 초기 라인 프린팅 헤드의 변형량을 측정한 후 이를 등가의 하중량으로 변환하였으며 FEA 해석을 통해 하중 추정 방법의 타당성을 검증하였다. 또한 헤드 크기를 증가시키지 않으면서 변형을 최소화할 수 있도록 기둥이나 지지벽으로 단위 노즐을 보강하거나 지지빔이나 건/습식각된 브릿지를 추가하여 내부 강성을 증가시킨 헤드 구조를 설계하였으며, 피드홀 변형이 최대 90% 감소하는 것을 확인하였다. 제안된 형상 중 공정 편의성과 제작비용을 고려하여 건식각된 피드홀 브릿지 형태의 헤드를 선정하였으며 실제 제작을 통해 노즐층 변형이나 잉크 누출 없이 정상 작동하는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제24권2호
• /
• pp.147-151
• /
• 2011

We were analyzed the piezoelectric characteristic for electronics printing to inkjet printing system. These applications were possible use to Actuator, MEMS, FPCB, RFID, Solar cell and LCD color filter etc. Piezoelectric print head is firing from ink droplet control consideration ink viscosity properties. At this time, micro pattern for PCB metal printing was possible by droplet control of piezoelectric driving. These driving characteristics are variable voltage pulse waveform. We are used the piezoelectric analysis software of Finite Element Method (FEM), Piezoelectric design parameters are acquired from piezoelectric analysis, and measurement of piezoelectric. It designed for piezoelectric head to possible electric print pattern of inkjet printing system. For this validity we were established through in comparison with simulation and measurement. Designed piezoelectric specification obtained voltage 98V, firing frequency 10 kHz, resolution 360dpi, drop volume 20pl, nozzle number 256, and nozzle pitch 0.33 mm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.451-454
• /
• 2007

This paper presents the pattern characteristic using the electrostatic drop-on-demand ink-jet printing system. In order to achieve the pattern characteristic of electrostatic inkjet printing, the capillary inkjet head system is fabricated using capillary tube, Pt wire and electrode, and is packaged by acrylic board for the accurate alignment between wire and electrode-hole. The applied DC voltage of 1.4 $\sim$ 2.0 kV used for the observation of electrostatic droplet ejection. Electrostatic droplet ejection is directly observed using a high-speed camera. For investigated pattern characteristic, conductive inkjet silver ink used. The higher voltage has a good condition which has micro dripping mode. Also, the droplet size decreases with increasing the supplied DC voltage. This paper shows the pattern which is formed by about 300um. Also, capillary inkjet head system will be applied industrial area comparing conventional electrostatic inkjet head system.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권2호
• /
• pp.50-53
• /
• 2008

A design approach using a one-dimensional (1D) lumped model was studied and applied to an industrial inkjet printing head design for micro patterning on printed circuit boards. For an accurate analysis, a three-dimensional piezoelectric-driven actuator model was analyzed and its jetting characteristics were applied to 1Danalysis model. The performance of the 1D lumped model was verified by comparing measured and simulated results. The developed 1D model helped to optimize the design and configuration of the inkjet head and could be implemented in the design of multi-nozzle inkjet printing heads to improve the jetting frequency and minimize crosstalk.