• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.704-707
• /
• 2004

The structure should be designed to be safe to any direction of earthquake input. However, the reference axes whereby the structure is analyzed and designed against earthquake may influence the design member forces. This study is concerned with the effect of the choice of the reference axes on the seismic design member forces. The analytical results on member forces using the principal axes suggested by Wilson and the global axes generally adopted in design offices show that the values of member forces by the principal axes be about $15\%$ smaller than those by the global axes in the example structure.

• Structural Engineering and Mechanics
• /
• 제20권3호
• /
• pp.381-387
• /
• 2005

• 한국운동역학회지
• /
• 제20권2호
• /
• pp.117-127
• /
• 2010

The axes of upper forearm coordinate system have been considered as principal axis of each segment which was component of elbow joint. The purpose of this study was to verify whether the mean direction(principal axis) of instantaneous axes of rotation for pure flexion/extension motion coincided with the flexion/extension axis of upper forearm coordinate system. The same procedure was done for pronation/supination motion. Furthermore, it was tested indirectly that there was an interaction effect between the two rotational motions. The results showed that most segment coordinate axes statistically were not consistent with the mean directions of flexion/extension and pronation/supination axes of rotation. From the results, it would be concluded that the ISB coordinate systems was proved to be a little valid for human movement analysis. There also was an effect of pronation/supination angles on flexion/extension motion.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.438-441
• /
• 1996

Spinal deformity is a serious disease especially for teenagers and it is desirable for school children to be checked possible spinal deformity by moire photographic inspection method. The moire images of children's backs are visually inspected by doctors, which may cause misjudge because of a large amount of data they have to examine. A technique is proposed in this paper for automating this inspection by computer. Two characteristic axes, a potential symmetry axis approximating the human middle line and a principal axis representing the direction of a moire pattern are employed. Two principal axes are extracted locally on a back and their gradients against the potential symmetry axis are calculated. These gradients compose a 2D feature space and a linear discriminant function (LDF) is defined there which separates normal cases from suspicious cases. The LDF defined by 40 training, data was employed in the experiment to examine 40 test data and 77.5% of them were classified correctly. This amounts to 88.8% if the training data is included.

• 대한토목학회논문집
• /
• 제8권1호
• /
• pp.159-164
• /
• 1988

연직하중(鉛直荷重), 구속압(拘束壓) 및 torque를 각각 독립적으로 작용시킬 수 있는 비틀림전단시험(剪斷試驗)을 실시하여 주응력축(主應力軸)을 회전(回轉)시켰을 경우, 변형율증분방향(變形率增分方向)과 응력방향(應力方向) 혹은 응력증분방향(應力增分方向) 사이의 관계가 조사되었다. 이 비틀림전단시험(剪斷試驗)은 $K_0$-압밀점토시료(壓密粘土試料)에 대하여 비배수(非排水) 및 배수(排水) 상태하에서 주응력축회전(主應力軸回轉)이 가능한 전 응력경로(應力徑路)로 실시되었다. 본(本) 연구(硏究)결과 파괴시의 변형율증분(變形率增分)벡터의 방향은 응력(應力)벡터방향과 일치함을 알 수 있었다. 즉 변형율증분(變形率增分)벡터방향은 초기의 낮은 응력단계(應力段階)에서는 응력증분(應力增分)벡터 방향과 일치하지만 높은 응력단계(應力段階)에서는 응력(應力)벡터방향과 일치하게 된다. 이는 점토(粘土)의 거동(擧動)이 응력의 증가에 따라 탄성(彈性)에서 소성(塑性)으로 변천되어 감을 의미한다. 따라서 주응력축회전(主應力軸回轉)시의 점토거동(粘土擧動)의 구성식화(構成式化)에는 탄소성이론(彈塑性理論)의 적용이 가능함이 입증되었다.

• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.55-62
• /
• 1999

When stress is beyond elastic limit or cracks occur in a reinforced concrete member subjected to axial force and biaxial bending, curvature about each principal axis of uncracked section is influenced by axial force and bending moments about both major and minor principal axes. It is mainly due to the translation and rotation of principal axes of the cross section after cracking. Recently, by considering these effects, a numerical method predicting the behavior of concrete columns subjected to axial force and biaxial bending was proposed. In this study, in order to verify the proposed numerical method and investigate the effects of cracking on the behavior of reinforced concrete columns, a series of tests were carried out for 16 tied reinforced concrete columns with 100×100 mm square and 200×100 mm rectangular sections under various loading conditions. The angle between the direction of eccentricity and the major principal axis of uncracked section were 0, 30, 40° for the square section and 0, 30, 45, 60, 90° for the rectangular section, respectively. A comparison between numerical predictions and test results shows good agreements in ultimate loads, axial force-lateral deflection relations, and lateral deflection trajectories. It is also found, in this limited investigation, that the ACI's moment magnifier method is conservative in both uniaxial and biaxial loading conditions.

• 한국지진공학회논문집
• /
• 제11권5호
• /
• pp.33-47
• /
• 2007

실무에서 지진해석법으로 널리 쓰이는 방법은 등가정적해석법과 응답스펙트럼해석법이다. 이 중 등가정적해석법에 의한 밑면전단력은 구조물의 주축을 해석좌표축에 어떻게 배치하는가와 상관없이 일관된 값을 나타낸다. 그러나 응답스펙트럼해석은 해석좌표 축에 구조물의 주축을 다르게 배치하여 해석을 수행하면 밑면전단력이 각기 다르게 발생한다. 이는 엔지니어가 구조물을 설계함에 있어 구조물의 주축을 해석좌표축에 어떻게 설정했는지에 따라 설계부재력이 모두 달라질 수 있음을 뜻한다. 또한 응답스펙트럼해석은 지진을 가한 방향의 직각방향에서 적지 않은 응답이 발생하는 경우가 생긴다. 한방향 해석에 대한 X와 Y축을 따라 분리되는 이러한 양방향 응답은 보정계수 산정시 쓰이는 밑면전단력을 작게 만들며 이는 결과적으로 보정계수를 크게하여 과다설계의 우려가 생긴다. 내진설계시 발생하는 이러한 문제점을 해결하기 위하여 본 논문에서는 수평의 강성 차이에 따라 구조물을 크게 세 가지(양방향 대칭 구조물, 한방향 비대칭구조물, 양방향 비대칭구조물)로 분류하여 각각의 경우에 대하여 간단한 모델을 선정하고 구조물의 주축을 회전시켜가면서 지진해석을 수행하였다. 각 경우의 예제구조물이 가지는 동적특성과 설계부재력을 살펴보았다. 현재 실무에서 적용되는 보정계수 산정법에 의한 설계부재력과 앞선 문제들을 해결하고자 본 논문에서 제안하는 새로운 보정계수 산정법에 의한 설계부재력을 비교하여 제안하는 보정계수 산정법의 효율성을 검토하였다. 그 결과로 새로 제안된 보정계수 산정법에 의하여 설계부재력을 산정하는 것이 내진설계시 엔지니어들이 겪을 수 있는 혼란을 덜어주며 경제적인 부재설계가 가능함을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1384-1391
• /
• 2006

The problem of an infinite anisotropic material with a crack inclined with respect to the principal material axes is analyzed. The material is subjected to uniform biaxial load along its boundary. It is assumed that the material is homogeneous, but anisotropic. By considering the effect of the horizontal load, the distribution of stresses at the crack tip is analyzed. The problem of predicting critical stress in anisotropic solids which is a subject of considerable practical importance is examined and the effect of load biaxiality is made explicitly. The present results based on the normal stress ratio theory show significant effects of biaxial load, crack inclination angle and fiber orientation on the critical stress. The analysis is performed for a wide range of the crack angles and biaxial loads.

• 한국자기공명학회논문지
• /
• 제12권2호
• /
• pp.103-110
• /
• 2008

Spin Hamiltonian for the paramagnetic center with a three-fold symmetry and high spin ($S{\geq}2$) multiplicity should contain the fourth order zero-field splitting (ZFS) terms. Electron magnetic resonance transition lines of the center with S = 5/2 are expected to split in a pair when the magnetic field is applied off the principal axes of ZFS, while they are superimposed when the magnetic field is applied parallel to the principal axes of ZFS. In this study we report that the transition lines of $Mn^{2+}$ centers at the three-fold symmetric sites in $LiNbO_3$, chemically equivalent but physically different, split in two due to the nonzero fourth order ZFS term.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 연약지반처리위원회 봄 학술발표회 논문집 연약지반처리
• /
• pp.3-12
• /
• 1994

Based on the shear failure mechanism, hydraulic fracturing criteria are extended to three dimensional stress state. According to the situation of the directions of borehole and major principal stress axes, three equations can be derived for three dimensional hydraulic fracturing problems. By comparing these equations, a single criterion is selected for hydraulic fracturing pressure in cohesive soils. The criterion is a function of maximum principal stress, minimum principal stress and soil parameters in UU conditions. The equation indicates that with any increase in maximim principal stress, hydraulic fracturing pressure decreases. In order to prove the integrity of the criteria, laboratory tests are performed on compacted cubical specimens using true a triaxial apparatus. The shape and direction of fractures are determined by injecting colored water after fracture initiation. It is found that the direction of fractures are perpendicular to the o1 plane.