• 연구논문집
• /
• s.34
• /
• pp.121-129
• /
• 2004

The influence of powder size and ball-milling time on the magnetic properties of $Fe_{73}Si_{16}B_7Nb_3Cu_1$ nanocrystalline alloy powder was investigated. Flake-shaped powders were produced by pulverizing the ribbons annealed at $550^\circC$ for 1 hour. The powders were classified and consolidated into core shapes at a pressure of 18ton/$cm^2$. The initial permeability at 100kHz of the inductor core produced using $53-75\mum$ powders showed the highest value although its consolidated density showed the lowest one. The reason for the result is due to the cracking of the particles larger than $75\mum$ during the consolidation process. The ball-milling of powders for 2-4 hours improved the consolidation density and the initial permeability of the cores. The intrinsic coercivity of the powder decreased as well, resulting from the stress relief of the powder by a short-time milling.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.135-138
• /
• 2007

We may have had experience to use meaning of stress once at least. Because various mental and physical frustration, conflict, deprivation, and pressure have been happened around the us while we live our whole life. The stress is always existing at our surroundings as much. Now, most stress measurement method is composed of mental method and physical method. The accuracy of stress grade lacks to the disproportion of subjectivity, objectivity, and a science trait. Therefore, in this paper, we propose the index processing algorithm for a stress relief better, after mixing mental measurement result and physical measurement result.

• Journal of Oral Medicine and Pain
• /
• v.20 no.1
• /
• pp.89-96
• /
• 1995

The purpose of this study was to assess the pain-relieving effect of iontophoretically applied prednisolone on the patients with temporomandibular joint (TMJ) pain. 30 TMJ pain patients participated in this study. Inclusion criteria for subject selection were 1) tenderness of TMJ on palpation and 2) visual analog scales (VAS) of above 20 mm. The patients with polyarthralgia, rheumatic arthralgia, and systemic diseases were excluded for this experiment. The patients were randomly assigned to one of three groups; (1) Group 1 for administration of 2% prednisolone, (2) Group 2 for administration of 1% prednisolone, and (3) Group 3 for administration of saline. Phoresor PM600(Motion Control Utah, U.S.A) was used for administration of drugs by iontophoresis. Baseline and post-medication pain levels were recorded by VAS, pressure pain threshold (PPT), and palpation index (PI). Post-medication data were compared with baseline data for each group. The results were as follows : 1. All the groups showed significant decrease of VAS scores after treatment. 2. PPT was significantly increase only in Group 1 and 2 not in Group 3. 3. PI was significantly decreased only in Group 1 and 2 not in group 3.

• Journal of computational fluids engineering
• /
• v.21 no.1
• /
• pp.19-29
• /
• 2016

A Prototype Gen-IV Sodium-cooled Fast Reactor which is one of the $4^{th}$ generation nuclear reactors is in development by Korea Atomic Energy Research Institute. The reactor is composed of four main fluid systems which are categorized by its functions, i.e., Primary Heat Transport System, Intermediate Heat Transport System, Decay Heat Removal System and Sodium-Water Reaction Pressure Relief System. The coolant of the reactor is liquid sodium and sodium-to-sodium heat exchangers are installed at the interfaces between two fluid systems, Intermediate Heat Exchangers between the Primary Heat Transport System and the Intermediate Heat Transport System and Decay Heat Exchangers between the Primary Heat Transport System and the Decay Heat Removal System. For the design and performance analysis of the Intermediate Heat Exchanger and the Decay Heat Exchanger, a computer code was written during previous step of research. In this work, the computer code named "SHXSA" has been validated preliminarily by computational fluid dynamics simulations.

• Journal of Energy Engineering
• /
• v.12 no.2
• /
• pp.74-83
• /
• 2003

In the advanced nuclear power plants including APR1400, the SDVS (Safety Depressurization and Vent System) is adopted to increase the plant safety using the concept of feed-and-bleed operation. In the case of the TLOFW (Total Loss of Feedwater), the POSRV (Power Operated Safety Relief Value) located at the top of the pressurizer is expected to open due to the pressurization of the reactor coolant system and discharges steam and/or water mixture into the water pool, where the mixture is condensed. During the condensation of the mixture, thermal-hydraulic loads such as pressure and temperature variations are induced to the pool structure. For the pool structure design, such thermal-hydraulic aspects should be considered. Understanding the phenomena of the submerged steam jet condensation in a water pool is helpful for system designers to design proper pool structure, sparger, and supports etc. This paper reviews and evaluates the steam jet condensation in a water pool on the physical phenomena of the steam condensation including condensation regime map, heat transfer coefficient, steam plume, steam jet condensation load, and steam jet induced flow.

• Journal of Aerospace System Engineering
• /
• v.8 no.2
• /
• pp.7-13
• /
• 2014

In order to enable fail-safe operation the electro-hydrostatic actuators can be dualized. When a symmetrical actuator is combined in series with an asymmetrical actuator with single rod cylinder, the flow rates of their cylinders are unmatched. If their position controller has same configuration, one of their pumps can supply too much flow rate under particular load conditions, which should be bypassed into low pressure side e.g. by a relief valve. In this paper it is shown how the hydraulic circuit for the asymmetrically combined electro-hydrostatic actuator can be designed without sacrificing power consumption.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.116-123
• /
• 2008

In the fossil power plant, the reliability of the components which consist of the many welded parts depends on the quality of welding. The residual stress is occurred by the heat flux of high temperature during weld process. This decreases the mechanical properties as the strength of fatigue and fracture or causes the stress corrosion cracking and fatigue fracture. Especially, the accidents due to the residual stress occurred at the weld parts of high-temperature and high-pressure pipes and steam headers. Also, the residual stress of the welded part in the recently constructed power plants has been brought into relief as the cause of various accidents. The aim of this study is the measurement of the residual stress using the x-ray diffraction method. The merits of this are more accurate and applicable than other methods. The materials used for the study is P92 steel for the use of high temperature pipe on super critical condition. The variables of tests are the post-weld heat treatment, the surface roughness and the depth from the original surface. The test results were analyzed by the distributed characteristics of the full width at half maximum intensity (FWHM) in x-ray diffraction intensity curve and by the relation of hardness with FWHM.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1154-1160
• /
• 2015

This paper describes the thermal characteristics of underground power cable system terminations according to the change of ambient temperature as well as operating temperature. Recently, the failure has been gradually increasing in outdoor termination during winter season because the power demand was increased by electricity heating system. The power demand and outdoor temperature is difference between day time and night time. The temperature difference has an influence on conductor extension and shrinkage due to conductor force as well as thermal mechanical characteristics. These phenomena have daily repeated during heating and cooling period of conductors. In these cases, the insulation of outdoor terminations might be degraded by the reduced interface pressure surrounding stress relief cone. Therefore, in this paper, the thermal characteristics are variously analysed by simulation considering power demand and ambient temperature condition during winter season at epoxy type termination as well as slip-on type termination

• Journal of Ginseng Research
• /
• v.42 no.3
• /
• pp.356-360
• /
• 2018

The fermentation of medicinal herbs facilitated by microbes is assumed to exert promising therapeutic efficacy on the absorption, bioavailability, and pharmacological effects by speeding up the making or conversion of active constituents into their metabolites. We examined the cardioprotective potential of fermented ginseng, GBCK25, against high-fat diet (HFD)-induced metabolic and functional illnesses as following the essential analysis such as electrocardiographic parameters, alterations of body and organ weights, and echocardiographic studies. The results exhibited that body weights were significantly reduced and the gain of different organ weights were partly eased by GBCK25 treatment. Echocardiography results proposed the amelioration of heart function through normalized levels of left ventricle systolic pressure, ejection fraction, and fractional shortening. These outcomes deliver straight confirmation that GBCK25 could be a potential nutraceutical source for the relief of HFD-induced obesity mediated cardiac dysfunctions.

• Journal of Information Technology Applications and Management
• /
• v.26 no.1
• /
• pp.77-93
• /
• 2019

Recently, office workers are increasingly aware of the right to disconnect because of the pressure from strong connections with Internet messengers. In this study, we examined the reason why the perception of the right to disconnect increases and how to deal with it. This research model is that smart working and psychological attachment from work affect right to disconnect, and that open communication and gender moderate the intensity of these effects. To verify this research model, survey questionnaires were distributed to workers in smart working environments, and 400 data were collected and analyzed using Smart-PLS. As results of data analysis, it was verified that smart working and psychological attachment from work had a significant influence on right to disconnect, that open communication group had a lesser effect of psychological attachment from work on right to disconnect than closed communication group, and that women had a lesser effect of psychological attachment from work on right to disconnect than men. Organizations need to maintain a desirable level of right to disconnect in order to improve the quality of working life. But, if it is impossible, They need to change the way of communication more openly so as to absorb the burden of strong connection by Internet. And they need to perform task assignment or stress relief policy reflecting gender characteristics.