본 논문에서는 천층블록/심층말뚝 혼합식 시멘트혼합처리 공법을 구조체적 관점에서 해석하였고, 각 방법별 특징 및 관련 거동을 분석하였다. 연속보 해석법의 경우 침하량을 매우 작게 예측하였고, 천층블록의 전단력과 휨응력은 다소 크게 예측하였다. Frame 해석법의 경우 천층블록의 부재력과 장주의 부재력은 수치해석법과 가장 근접한 거동을 예측하였지만, 장주의 침하는 작게 예측하여, 장주 반력을 이용한 별도 침하계산을 실시해야하는 것으로 나타났다. 지반아칭법과 말뚝지지전면기초해석법의 경우 장주의 하중분담율이 타방법에 비해 매우 커서 장주의 축력이 과대 예측되었다. 천층블록/심층말뚝 혼합식 시멘트혼합처리공법을 적용하면, 천층블록의 침하 및 지반반력은 중앙에서 가장 크고, 외곽에서 가장 작았다. 또한, 개량체와 지반간의 상호작용을 고려할 수 있는 해석법에서 장주 개량체가 분담하는 하중은 약 20~45% 범위를 보였고, 응력분담비는 일반적인 말뚝식 DCM 공법보다 작은 약 2.0~5.0정도의 범위를 나타내었다. 장주 두부 경계조건에 따라 최대 부재력에서는 유사하지만, 두부 구속조건에서는 장주의 위치에 따라 축력 및 연직변위는 서로 다르게 나타났다.
2006년 10월 22일에서 24일에 걸쳐 한반도 강릉지역에서 강한 집중호우가 발생했다. 이 기간에 대해서 집중호우가 발생하기 전과 강우강도가 가장 강했을 때 나타나는 종관적, 운동학적 특성을 조사하기 위하여 본 연구에서는 지상일기도, 상층일기도, 적외위성영상, 자동기상관측장비(AWS) 자료, NCEP(National Centers for Environmental Prediction) 전구분석자료를 이용하였다. 분석 기간 동안 강릉에서 관측된 총 강수량은 316.5 mm이고, 최대 순간풍속은 $63.7m\;s^{-1}$이다. 일기도를 분석해보면 집중호우가 시작하기 전 온대저기압이 한반도 중부에서 발달하였으며 한반도 북부에 역전기압골이 형성되어 있다. 또한 300 hPa 상층일기도에서는 서해와 한반도 남부에 제트기류가 위치하며, 위치 소용돌이도 이상과 관련된 절리 저기압이 한반도 북서부에서 발달하고 있다. 강우강도가 가장 강했을 때의 특성을 좀 더 자세히 알아보기 위하여 강릉지역의 위치 소용돌이도 이상과 바람, 위치 소용돌이도의 시간-연직 단면도, 연직운동, 발산장과 수렴장, 역학적 온위의 연직분포에 대해 조사하였다. 종관적, 운동학적 과정을 분석해 본 결과 대류권계면 접힘이 집중호우 발생에 큰 역할을 한 것으로 사료된다.
The wind design of buildings is typically based on strength provisions under ultimate loads. This is unlike the ductility-based approach used in seismic design, which allows inelastic actions to take place in the structure under extreme seismic events. This research investigates the application of a similar concept in wind engineering. In seismic design, the elastic forces resulting from an extreme event of high return period are reduced by a load reduction factor chosen by the designer and accordingly a certain ductility capacity needs to be achieved by the structure. Two reasons have triggered the investigation of this ductility-based concept under wind loads. Firstly, there is a trend in the design codes to increase the return period used in wind design approaching the large return period used in seismic design. Secondly, the structure always possesses a certain level of ductility that the wind design does not benefit from. Many technical issues arise when applying a ductility-based approach under wind loads. The use of reduced design loads will lead to the design of a more flexible structure with larger natural periods. While this might be beneficial for seismic response, it is not necessarily the case for the wind response, where increasing the flexibility is expected to increase the fluctuating response. This particular issue is examined by considering a case study of a sixty-five-story high-rise building previously tested at the Boundary Layer Wind Tunnel Laboratory at the University of Western Ontario using a pressure model. A three-dimensional finite element model is developed for the building. The wind pressures from the tested rigid model are applied to the finite element model and a time history dynamic analysis is conducted. The time history variation of the straining actions on various structure elements of the building are evaluated and decomposed into mean, background and fluctuating components. A reduction factor is applied to the fluctuating components and a modified time history response of the straining actions is calculated. The building components are redesigned under this set of reduced straining actions and its fundamental period is then evaluated. A new set of loads is calculated based on the modified period and is compared to the set of loads associated with the original structure. This is followed by non-linear static pushover analysis conducted individually on each shear wall module after redesigning these walls. The ductility demand of shear walls with reduced cross sections is assessed to justify the application of the load reduction factor "R".
남중국해는 심해 분지, 대륙 붕단, 얕은 대륙붕, 많은 해협, 복잡한 수심 특징을 가진 전형적인 연안 영해이다. 본 연구에서는, 비구조 격자 기반으로 대상 해역을 상세하게 해상할 수 있으며, 개방경계에 조석을, 해표면에 기상자료를 입력하여 조석 및 폭풍해일을 모의할 수 있는 수치 모델을 구축하여 남중국해의 조석 특성과 전파 양상을 조사하고, 태풍에 의한 폭풍해일을 재현하였다. 태풍에 의한 폭풍해일 모의는, 2013년에 필리핀에 막대한 피해를 초래하였던 태풍 하이옌에 대해서 수행하였다. 관측치 및 선행 연구의 조석 분포와의 비교 결과, 4개의 주요 분조의 진폭과 위상은 대체적으로 잘 모의되었다. 선행 연구들에 따르면, 당 해역은 모델을 이용하여 조석을 예측하기가 어렵다고 보고되고 있는데, 이 점을 감안한다면 본 연구에서 예측한 조석은 허용 범위에 있다고 생각된다. 본 연구에서 수행한 자유 진동 모드 실험을 통해서 남중국해가 일주조 조석이 우세한 이유를 알 수 있었으며, 조석 잔차류(tidal residual current) 및 총에너지 소실(total energy dissipation) 산정을 통해서 조석 및 퇴적환경을 파악하였다. 본 연구에서 구축한 모델을 이용하여 태풍 하이옌에 의한 폭풍해일을 타당하게 모의하였으며, 모델 검증 및 조석 환경 규명을 통하여 남중국해의 지역 실시간 순압 조석/수위 예측 시스템을 구축하였다.
노심보충탱크 상부에 설치되는 유동분사기 형상에 따른 냉각수 주입특성 및 탱크 내에서의 열수력 현상 변화를 파악하기 위한 안전주입배관 2인치 파단 소형냉각재상실사고(SBLOCA) 모의시험이 잔열 및 피동잔열제거계통(PRHRS) 모의 없이 수행되었다. 두 가지 형상의 유동분사기를 설치하고 수행한 각각의 시험은 거의 유사한 초기 및 경계조건에서 수행되었으며, 이로 인해 반복시험에 대한 재현성이 충족되었다고 판단된다. 시험결과는 유동분사기의 종류(본 시험에서는 구멍의 개수에 해당)에 관계없이 유사한 열수력학적 거동을 보였으며, 초기 주입유량 관점에서는 구멍의 개수가 2배인 B형이 A형에 비해 좀 더 우수한 주입 성능을 보였다. 노심보충탱크 격리 밸브가 개방된 후 압력평형배관을 통해 유입되는 고온의 원자로냉각재는 상부 헤더에서 상대적으로 저온인 $50^{\circ}C$ 물과 혼합되면서 증기 응축과 같은 상변화에 의한 압력 변동을 동반하는 다차원 열유동 현상을 일으키게 된다. 이로 인해 초반부 노심보충탱크 주입 유량은 상온운전 조건에서 보다는 작게 되고, 일정시간 경과 후에는 유사한 주입유량 특성을 보였다.
진공압밀공법은 성토재하압밀공법과는 달리 성토재료가 불필요하며, 급격한 재하에 의한 전단 파괴에 대한 위험이 없다는 공법원리상의 장점을 지니고 있으나, 시공상의 어려움으로 국내외적으로 활발하게 적용되지는 않았다. 그러나 최근들어 진공막 설치기술 및 강력한 진공펌프등의 등장으로 시공기술이 발전되면서 진공압밀공법은 미국, 유럽, 일주등지에서 적극적으로 활용되기 시작했고, 국내에서도 광양, 김해등지의 연약지반에 개량공법으로 적용된바 있다. 일반적으로 진공에 의한 부압을 가상성토하중으로 환산하고 이를 압밀이론에 적용하여 진공압밀시의 지반 거동을 예측하고 있다. 그러나 진공압을 가상성토하중으로 모델링할 경우 진공압밀공법적용시 지반내 전응력변화없이 유효응력만이 증가하는 현상을 적절히 모델링 할 수 없다. 즉 진공압에 대한 가상성토하중 모델링은 지반거동에 중요한 영향을 미치는 응력 경로를 실제와는 달리 고려하게 된다. 진공압 가상성토하중 모델링(model 1)의 적합성을 검토하기 위하여, 김해지역의 하수처리장 부지조성을 위하여 진공압밀공법이 적용된 지반에 대한 예측을 수행하였다. 일반적으로 Model 1은 진공압밀하에서의 지반침하에 대하여서는 합리적으로 예측할 수 있으나 진공부압 을 가상성토하중으로 가정하기 때문에 과잉간극수압의 크기 및 소산양상을 예측하는데는 적용 할 수 없다는 단점이 있다. 본 연구에서는 진공압밀하에서의 실제와 같이 지반의 응력경로를 고려할 수 있도록, 진공에 의한 부압을 지표면 수압의 경계 치로서 모델링(model 2)하는 해석기법을 제안하였다. 현장계측치와 비교결과, Model 2는 압밀 침하량 및 침하시간뿐 아니라 과잉 간극 수압의 크기 및 소산양상 등 진공압밀하에서의 실 지반거동이 매우 유사하게 예측되었다.
이산화탄소 지중저항을 위한 주입공의 안정성 및 누출제어에 주요 영향을 미치는 그라우팅 시멘트의 물리, 역학적 물성과 파괴 거동 특성을 실내실험을 통해 규명하였다. 물과 조강 3종 포틀랜드 시멘트를 네 종류의 질량비(각각 0.4, 1, 2, 3)로 배합한 시편을 제작하여 시험하였다. 그라우팅재의 제반 물리, 역학적 물성은 물/시멘트 배합비 0.4와 1 사이에서 급격하게 변화하며 전체적으로 물/시멘트 배합비가 증가함에 따라 공극률은 증가, 탄성파속도, 탄성계수, 압축, 인장강도 등은 감소하는 체계적인 변화양상을 보였다. 특히 일련의 삼축압축실험에서는 시편 성형시 물/시멘트 배합비와 시편에 작용하는 구속압 조건에 따라 취성파괴와 연성변형의 경계가 명확히 구분되었다. 규명된 물성 및 파괴거동은 이산화탄소 주입공 주변의 암반응력과 주입압 조건에 따라 발생할 수 있는 그라우팅재의 일차적 변형, 파괴, 균열 등의 모델분석에 주요 입력인자로 활용될 수 있을 것으로 기대한다.
SNS 사용이 대중화되면서 사람들은 프로필 생성과 다양한 정보 공유를 한다. 이렇게 자발적인개인정보 공개와 자기표현을 통해 익명을 전제에서 온라인 정체성이 형성이 된다. 익명성은 현실과 달리 사용자가 원하는 모습으로 정체성을 표현하기에 쉬운 환경을 가진다. 다시 말해 SNS 사용자는 현실과 다른 모습인 멀티페르소나를 보여주기 쉽다는 것을 설명한다. 본 연구에서 멀티페르소나에 대한 연구의 필요성은 다음과 같다. 첫째, 사회적인 측면에서 멀티페르소나 성향을 보이는 사용자는 익명성을 통해 악성 댓글, 타인의 정보 도용, 온라인 왕따 등 반사회의 현상을 초래하는 경우가 많다. 둘째, 경영학적 측면에서 멀티페르소나 성향을 가진 사용자의 데이터 수집으로 인해 기업의 데이터를 정확히 예측하기 힘든 요소가 될 수 있다. 또한 멀티페르소나 성향의 사용자로부터 생성된 정보는 신뢰적인 측면에서 문제가 될 수 있다. 본 연구는 청소년의 멀티페르소나에 초점을 둔다. 청소년기에 형성된 정체성은 성인의 정체성과 큰 상관관계를 가진다는 선행연구들이 되어있다. 또한 온라인 환경을 통해 형성된 청소년의 멀티페르소나 성향은 윤리적 정체성 확립에 어려움을 가지고, 이는 사회적인 문제로 연결되는 경우가 많다. 본 연구는 청소년 664명을 대상으로 설문이 진행되었다. SNS 상의 대인관계에서 가지는 감정적 요소 4가지(타인과의 거리감, 상대적 박탈감, 타인 반응에 대한 압박감, 사회 규범의 영향)를 선별하고, 이 요소들과 멀티페르소나 성향의 동의 정도와 어떠한 상관관계를 가지는지 파악하였다. 그 결과 타인과의 거리감과 멀티페르소나가 음의 상관관계를 가지는 것을 제외하고 모두 양의 상관관계를 가지는 것으로 확인되었다. 본 연구는 기존의 경영학 연구에서 다루지 않았던 온라인 정체성의 문제를 화두로 올렸다는 면에서 의의를 가진다. 또한 기업적 측면에서는 SNS 사용자의 정확한 데이터를 수집하고 멀티페르소나를 통제하는 환경 조성에 도움을 준다.
Plasma in liquid phase has attracted great attention in the last few years by the wide domain of applications in material processing, decomposition of organic and inorganic chemical compounds and sterilization of water. The plasma in liquid is characterized by three main regions which interact each - other during the plasma operation: the liquid phase, which supply the plasma gas phase with various chemical compounds and ions, the plasma in the gas phase at atmospheric pressure and the interface between these two regions. The most complex region, but extremely interesting from the fundamental, chemical and physical processes which occur here, is the boundary between the liquid phase and the plasma gas phase. In our laboratory, plasma in liquid which behaves as a glow discharge type, is generated by using a bipolar pulsed power supply, with variable pulse width, in the range of 0.5~10 ${\mu}s$ and 10 to 30 kHz repetition rate. Plasma in water and other different solutions was characterized by electrical and optical measurements. Strong emissions of OH and H radicals dominate the optical spectra. Generally water with 500 ${\mu}S/cm$ conductivity has a breakdown voltage around 2 kV, depending on the pulse width and the repetition rate of the power supply. The characteristics of the plasma initiated in ultrapure water between pairs of different materials used for electrodes (W and Ta) were investigated by the time-resolved optical emission and the broad-band absorption spectroscopy. The deexcitation processes of the reactive species formed in the water plasma depend on the electrode material, but have been independent on the polarity of the applied voltage pulses. Recently, Coherent anti-Stokes Raman Spectroscopy method was employed to investigate the chemistry in the liquid phase and at the interface between the gas and the liquid phases of the solution plasma system. The use of the solution plasma allows rapid fabrication of the metal nanoparticles without being necessary the addition of different reducing agents, because plasma in the liquid phase provides a reaction field with a highly excited energy radicals. We successfully synthesized gold nanoparticles using a glow discharge in aqueous solution. Nanoparticles with an average size of less than 10 nm were obtained using chlorauric acid solutions as the metal source. Carbon/Pt hybrid nanostructures have been obtained by treating carbon balls, synthesized in a CVD chamber, with hexachloro- platinum acid in a solution plasma system. The solution plasma was successfully used to remove the template remained after the mesoporous silica synthesis. Surface functionalization of the carbon structures and the silica surface with different chemical groups and nanoparticles, was also performed by processing these materials in the liquid plasma.
Electronic industry had required the finer size and the higher performance of the device. Therefore, 3-D die stacking technology such as TSV (through silicon via) and micro-bump had been used. Moreover, by the development of the 3-D die stacking technology, 3-D structure such as chip to chip (c2c) and chip to wafer (c2w) had become practicable. These technologies led to the appearance of HBM (high bandwidth memory). HBM was type of the memory, which is composed of several stacked layers of the memory chips. Each memory chips were connected by TSV and micro-bump. Thus, HBM had lower RC delay and higher performance of data processing than the conventional memory. Moreover, due to the development of the IT industry such as, AI (artificial intelligence), IOT (internet of things), and VR (virtual reality), the lower pitch size and the higher density were required to micro-electronics. Particularly, to obtain the fine pitch, some of the method such as copper pillar, nickel diffusion barrier, and tin-silver or tin-silver-copper based bump had been utillized. TCB (thermal compression bonding) and reflow process (thermal aging) were conventional method to bond between tin-silver or tin-silver-copper caps in the temperature range of 200 to 300 degrees. However, because of tin overflow which caused by higher operating temperature than melting point of Tin ($232^{\circ}C$), there would be the danger of bump bridge failure in fine-pitch bonding. Furthermore, regulating the phase of IMC (intermetallic compound) which was located between nickel diffusion barrier and bump, had a lot of problems. For example, an excess of kirkendall void which provides site of brittle fracture occurs at IMC layer after reflow process. The essential solution to reduce the difficulty of bump bonding process is copper to copper direct bonding below $300^{\circ}C$. In this study, in order to improve the problem of bump bonding process, copper to copper direct bonding was performed below $300^{\circ}C$. The driving force of bonding was the self-annealing properties of electrodeposited Cu with high defect density. The self-annealing property originated in high defect density and non-equilibrium grain boundaries at the triple junction. The electrodeposited Cu at high current density and low bath temperature was fabricated by electroplating on copper deposited silicon wafer. The copper-copper bonding experiments was conducted using thermal pressing machine. The condition of investigation such as thermal parameter and pressure parameter were varied to acquire proper bonded specimens. The bonded interface was characterized by SEM (scanning electron microscope) and OM (optical microscope). The density of grain boundary and defects were examined by TEM (transmission electron microscopy).
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.