• 제목/요약/키워드: Pressure Reducing Valve:PRV

검색결과 6건 처리시간 0.02초

캐비테이션 억제를 위한 감압밸브의 유로 형상에 관한 연구 (Study of the geometry of the flow path of a Pressure Reducing Valve to Suppress the Cavitations)

  • 박우철;김일겸
    • 한국산학기술학회논문지
    • /
    • 제16권1호
    • /
    • pp.50-55
    • /
    • 2015
  • 본 연구에서는 공동 주택의 수전 개방 조건에서, 감압밸브 내부 오리피스 형상이 캐비테이션 발생에 미치는 영향에 대하여 살펴보았다. 이를 위하여 감압밸브 내부의 유로형상을 9가지 유형으로 구별하여 제시하고, 3차원 유한해석 코드인 ANSYS CFX를 사용하여 감압밸브 내의 유동해석을 수행하였다. 급격한 단면 변화가 일어나는 오리피스에서 최저 압력과 최대 속도가 발생하였다. 최대속도가 존재하는 부위에서 0 이상 증기체적비를 나타내어 캐비테이션이 발생함을 확인하였다. 유로 길이가 긴 형상에 비하여 돌연 확대관 형상의 모델에서 유체의 최대 속도가 낮게 나타났다. 돌연확대관 형상의 경우에는 매우 작은 증기체적비를 나타내고 있으며, 돌연확대의 정도가 클수록 증기체적비는 낮게 나타났다. 따라서 감압밸브의 케비테이션 발생을 방지하기 위해서는 돌연확대의 형상을 갖도록 설계하는 것이 타당하다고 판단된다.

통계적 기법을 이용한 배·급수 관망 내 감압 밸브 성능 평가에 관한 사례 연구 (Evaluation of Pressure Reducing Valves performance using Statistical Approach in Water Distribution System : Case Study)

  • 박노석;최두용;이영주;윤석민
    • 상하수도학회지
    • /
    • 제29권4호
    • /
    • pp.519-531
    • /
    • 2015
  • It has been widely accepted that the pressure management of water distribution systems using pressure reducing valves(PRVs) would be an effective method for controlling leakages. A pressure reducing valve (PRV) regulates outlet pressure regardless of fluctuating flow and varying inlet pressure, thereby reducing leakage and mitigating the stress on the water distribution system. However, the operation of a PRV is vulnerable to its mechanical condition and hydraulic operability. In this research, the effect of PRVs installed in water distribution system are evaluated in terms of hydraulic pressure reduction and mechanical performance by analyzing measured pressure data with statistical approach. A statistical approach using the moving average filter and frequency analysis based on fourier transform is presented to detect abnormally operated PRVs that have been densely installed in water distribution system. The result shows that the proposed approach can be a good performance evaluation method by simply measuring pressures for the PRVs.

구조-유체 연성해석을 통한 수도용 감압밸브에서의 유체유발진동에 관한 연구 (Study on Vibration Induced by Fluid at a Water Pressure Reducing Valve through Structure-Fluid Coupled Analysis)

  • 박우철;이중근;김일겸;박용석
    • 한국산학기술학회논문지
    • /
    • 제13권10호
    • /
    • pp.4371-4377
    • /
    • 2012
  • 본 논문에서는 수도용 감압밸브에서의 유체유발진동의 원인을 파악하기 위한 위하여 구조-유체 연성 해석을 수행하였다. 감압밸브의 소음을 측정한 결과 250Hz의 저주파 대역의 소음이 있음을 확인하였다. 상용 소프트웨어인 ANSYS/CFX를 사용하여 유체의 유동 해석을 수행한 결과, 감압밸브 내에서 노즐 효과에 의하여 40m/s 정도의 유속이 형성되고, 이에 따라 감압밸브 내에 부압이 발생하였다. 밸브 내에 형성된 유동에 의한 압력 분포를 하중 조건으로 구조해석을 한 결과, 유로를 막을 수 있을 정도의 고무 재질인 디스크의 변형이 발생하였다. 이러한 디스크의 변형이 반복적으로 일어남으로써 소음진동현상이 발생함을 확인하였다.

공동주택단지 급수계통의 유량특성에 미치는 감압밸브의 영향 (Influence of Pressure Reducing Valves on Flow Characteristics of the Water Supply System for an Apartment Complex)

  • 김태진;차동진
    • KIEAE Journal
    • /
    • 제12권6호
    • /
    • pp.23-28
    • /
    • 2012
  • Pressure distribution in the water supply system of an apartment complex consisting of 12 buildings and 635 units in total have been investigated numerically. The complex incorporates two zone booster pump system, and around a half of units have pressure reducing valves (PRVs) in them. Calculated hydrostatic pressure without the water flow were compared with their designed and measured counterparts, and they agreed quite well with each other. Then, the pressure and volumetric water flow rate at all units were analyzed, indicating that there are noticeable differences in pressure and flow rate in one unit to another, although the aforementioned minimization technologies of pressure deviation were employed. In order to further reduce the difference in the water flow rate, it is suggested that all the units in the complex have PRVs installed in their water supply system. The effect of setting pressure of the PRVs on the non-uniformity of the flow in each unit and on the reduction of total water supply for the apartment complex have been studied. With the same PRV setting pressure of 3.952 bar (or the gauge pressure of $3.0kg_f/cm^2$), it has been estimated that the suggested system improves the non-uniformity (the coefficient of variation) of the flow rate of apartment complex over the current system, from 8.02% to 6.66%, and reduces the total water supply, from $0.02804m^3/s$ to $0.02766m^3/s$.

상수도 관망의 유수율 제고 기술의 적용 및 분석 (Technical Application and Analysis for Reduction of Water Loss in Water Distribution Systems)

  • 김주환;이두진;배철호;우형민
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2009년도 학술발표회 초록집
    • /
    • pp.260-266
    • /
    • 2009
  • 본 연구는 지방상수도 배급수 관망의 유수율을 향상시키기 위하여 수량관리를 위한 블록시스템 구축을 통한 구역화 계량, 누수의 정량화를 위한 야간최소유량 측정을 통한 누수평가지표 및 국제 누수지수ILI(Infrastructure Leakage Index)의 도입, 압력제어를 통한 누수저감 효과분석, 장기적인 계획수립을 위하여 노후수도관의 잔존수명 예측 등 누수를 평가 관리할 수 있는 기술을 개발, 제안하였다. N시 야간최소유량 측정을 통하여 주거지역과 상업지역에서 정량적인 누수평가지표로 관길이당, 급수전당의 허용기준누수량을 산정하였다. 이는 관망정비가 완료된 주거, 상업지역을 각각 대상으로 UK water industry에서 제안한 방법을 이용하여 실측을 통한 야간최소유량을 분석함으로써 유수율을 대신할 수 있는 허용누수량 산정식을 개발하였다. 압력제어를 통한 누수저감효과는 감압변의 설치를 통하여 수행되는데, 사천시 우티 배수구역을 대상으로 압력관리 구역을 4개로 분할하고 감압밸브 3개소, 가압펌프 1개소를 설치하여 압력을 조절한 결과 약 $466\;m^3/day$의 누수를 저감시킬 수 있을 것으로 나타나 압력관리를 통하여 연간 113백만의 비용절감효과가 기대되었다. 노후 상수관로의 부식속도 및 잔존수명 예측 연구에서는 매설년도, 토양 또는 수질특성에 따른 관체의 부식속도를 평가함으로써 잔존두께를 예측할 수 있는 모델을 개발하였으며 또한 부식으로 인한 공식특성에 따른 잔존강도 등을 평가할 수 있는 비선형회귀 모형을 개발, 수도관의 잔존수명예측에 활용하여 장단기 노후관 개대체 계획수립에 활용할 수 있도록 제안하였다. 본 연구의 결과들은 지방상수도의 유수율 제고 및 관망정비사업에 적극적으로 활용할 수 있는 누수평가 및 관리기법을 제안할 수 있을 것으로 기대된다.

  • PDF