• 한국추진공학회지
• /
• 제25권4호
• /
• pp.19-27
• /
• 2021

한국형발사체용 연소기 성능 고도화를 위한 핵심기술을 검증하기 위해 고압 축소형 연소기를 개발하였다. 성능 고도화를 위한 핵심기술은 고압 연소기용 분사기 설계, 적층제조기법을 적용한 연소안정화 장치 개발, 고압 축소형 연소기 헤드 및 재생냉각 연소실 설계/제작 등이다. 고압 축소형 연소기 개발을 통해 핵심기술을 검증하였고, 이 기술들은 향후 대형 액체로켓엔진 연소기 개발에 활용될 예정이다.

• 물과 미래
• /
• 제28권5호
• /
• pp.141-150
• /
• 1995

공기실(air chamber)은 관망에 있어 압력수두가 설계치를 초과하지 않고 또한 최저 압력수두가 발생하지 않도록 하기 위해 설계된다. 따라서 공기실은 갑작스런 펌프의 중단에 따르는 순간적인 최고 및 최저 압력수두의 발생을 방지하기 위해 사용되어 진다. 본 연구에서는 가상적인 관망에 공기실을 적용하여 공기실의 공기부피, 위치, 면적, 오리피스에서의 손실계수 그리고 polytropic지수의 변화에 따른 압력수두의 완화효과를 분석하였다. 분석결과 공기의 부피가 증가할수록 최고압력수두는 감소하고 최저 압력수두는 증가함을 보여주었으며, 공기실의 위치나 단면적의 변화는 완화효과의 변화가 별로 없었다. 또한 오리피스 손실계수를 증가할수록 최고 압력수두가 감소함을 보이고, 공기실의 공기가 등온변화과정을 따를때가 단열변화과정을 따를 때보다 최고 압력수두가 낮음을 보여주었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.890-895
• /
• 2001

Pressure resonance frequency that is caused in the combustion chamber can be interpreted to acoustic analysis. Until now the pressure resonance has been assumed and calculated to a disc type combustion chamber that neglected the combustion chamber height because the knock occurs near the TDC(top dead center). In this research FEM(fine element method) has been used to calculate the pressure resonance frequency inside the experimental engine combustion. The reduce error of the resonance frequency obtained by FEM has decreased about 50% compared to the calculation of Draper's equation. Due to the asymmetry in the shape of the combustion chamber that was neglected in Draper's equation we could find out that a new resonance frequency could be generated. To make the experimental results equal we could know that the speed of sound that satisfies Draper's equation was selected 13% higher than all the pent-roof type combustion considered.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1905-1910
• /
• 2001

Pressure resonance frequency that is caused in the combustion chamber can be interpreted by acoustic analysis. Until now the pressure resonance has been assumed and calculated to a disc type combustion chamber that neglected the combustion chamber height because the knock occurs near the TDC(top dead center). In this research FEM(finite element method) has been used to calculate the pressure resonance frequency inside the experimental engine combustion. The error of the resonance frequency obtained by FEM has decreased about 50% compared to the calculation of Draper's equation. Due to the asymmetry in the shape of the combustion chamber that was neglected in Draper's equation we could find out that a new resonance frequency could be generated. To match the experimental results, the speed of sound that satisfies Draper's equation is selected 13% higher than the value for pent-roof type combustion chamber.

• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.48-53
• /
• 2000

The effects of the internal flow in a diesel injection nozzle on the atomization of the spray has been investigated experimentally. Flow visualization was made using a transparent acrylic model nozzle. And also, measurement of the sac chamber pressure was made for clartfying the effect of pressure fluctuation in the sac chamber on the wpray behaviors. The geometry of the model nozzle was scaled up 10 times of the actual nozzle and the injection pressure for the model nozzle was adjusted so as to achieve a Reynolds number at the discharge hole which was the same as the actual nozzle. Polystyrene tracers, a laser sheet light and a still/high speed video camera were used to visualize the flow pattern in the sac chamber. When the needle lift was small, the high turbulence in the sac chamber generated by the high velocity seat flow made the spread angle of the spray large. Cavitation which arose in the sky chamber induced the pressure fluctuation and then affects the spread angle of the spray.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.66-70
• /
• 2010

우주발사체용 75톤급 액체로켓엔진 연소기의 저압연소시험에서 얻은 데이터를 기본으로 75톤급 연소기의 연소특성속도 및 비추력을 예측하였다. 75톤급 연소기 저압연소시험에서 연소특성속도는 약 1750 m/sec, 비추력은 240 sec로 30톤급 연소기의 저압 성능보다 높은 값을 보여주었다. 30톤급 연소기의 연소시험에서 얻은 저압/고압 관계식을 통해 75톤급 연소기의 설계점에서 연소특성속도는 약 1770 m/sec, 비추력은 약 278 sec로 목표치를 상회하는 값을 예측하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.231-238
• /
• 2010

75톤급 기술검증용 연소기의 저압 조건 연소안정성 시험이 수행되었다. 동일한 추진제 유량을 연소실에 공급하면서 분사기 수량이 감소된 연소기 헤드의 경우 연소압력 30 bar에서 자발 불안정이 발생하였으나, 분사기 수량이 증가된 연소기 헤드에서는 동일한 연소압력 조건에서 고주파 연소안정성이 유지됨을 보였다. 30 bar에서 연소안정성을 보인 연소기 헤드는 연소압력 20 bar에서 자발 불안정이 발생하여 안정성 경계 영역을 보여주었다.

• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.27-34
• /
• 2019

This paper presents a chamber pressure model development of K2 rifle by applying Gaussian mixture model. In order to materialize a real recoil force of a virtual reality shooting rifle in military combat training, the chamber pressure which is one of major components of the recoil force needs to be investigated and modeled. Over 200,000 data of the chamber pressure were collected by implementing live fire experiments with both K100 and M193 of 5.56 mm bullets. Gaussian mixture method was also applied to create a mathematical model that satisfies nonlinear, asymmetry, and deviations of the chamber pressure which is caused by irregular characteristics of propellant combustion. In addition, Polynomial and Fourier Regression were used for comparison of results, and the sum of squared errors, the coefficient of determination and root-mean-square errors were analyzed for performance measurement.

• Korean Journal of Hydrosciences
• /
• 제7권
• /
• pp.77-86
• /
• 1996

An air chamber is design to keep the pressure from exceeding a predetermined value, or to prevent low pressures and colum separation. Therefore, it can be used to protect against rapid transients in a pipe system following abrupt pump stoppage. In this research, an air chmber was applied to a hypthetical pipe system to analyze attenuation effect of pressure head for different air volumes, locations, chamber areas, coefficients of orifice loss and pollytropic exponents. With an increase of air volume, the maximum pressure head at pump site is decreased and the minimum pressure head is imcreased. For different locations and areas of the chamber, the attenuation effects do not show much difference. Also, as the orifice loss coefficient increases, the maximum pressure head is decreased. For different polytropic exponents, isothermal process shows lower maximum pressure head than that of the adiabatic process.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.673-678
• /
• 2002

Laboratory calibration chamber tests for cone penetrometers, pressuremeters and dilatometers in cohesionless soil specimens have been conducted by numerous researchers. However, there have been only few applications to compacted or preconsolidated cohesive soils. Therefore, for the first time, Calibration Chamber System was developed in Korea University. This can be attributed to the extremely time consuming and laborious process involved in the preparation of large cohesive soil specimens in addition to other complexities involving instrumentation for pore pressure monitoring and the need for maintaing saturation by back pressure. Chamber System with similar principle as LSU Chamber System was made of more strengthen and complementary form by increasing system diameter(1.2m), carrying out 1st and 2nd consolidation process in one system for smooth and safe work, accurate Data Aquisition.