• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.221-221
• /
• 2013

Vertical LED (VLED) has been recognized as a way to obtain the high-power LED due to their advantages [1]. However, approximately 4% of the light generated from the active region is extracted, if the light extraction from side walls and back side is neglected because of Fresnel reflection (FR) and total internal reflection (TIR) [2,3]. In this study, the optical simulation of the VLED with the various microstructures was performed. Among them, the microlens having the diameter of 3 ${\mu}m$ and the height of 1.5 ${\mu}m$ shown the best result was chosen, and then, optimized microlens was formed on a GaN template using conventional semiconductor process. Various microstructures were proposed to improve the light extraction efficiency (LEE) of the VLED for the simulation. The LEE was simulated using LightTools based on a Monte Carlo ray tracing. The microstructures with hemisphere, cone, truncated and cylinder pattern having diameter of 3 ${\mu}m$ were employed on the top layer of the VLED respectively. The improvement of the LEE by using the microstructure is 87% for the hemisphere, 77% for the cone, 53% for the truncated, 21% for the cylinder, compared with the LEE of the flat surface at the reflectance of 85%. The LEE was increased by 88% at the height of 1.5 ${\mu}m$, compared with the LEE of the flat surface. We found that the microlens on the top layer is the most suitable for increasing the LEE. In order to apply the proposed microlens on n-GaN surface, we fabricated microlens on a GaN template. A photoresist array having hexagonal-closed packed microlens was fabricated on the GaN template. Then, optimization of etching the GaN template was performed using a dry etching process with ICP-RIE. The dry etching carried out using a gas mixture of Cl2 and Ar, each having a flow rate of 16 sccm and 10 sccm, respectively with RF power of 50 W, ICP power of 900 W and chamber pressure of 2 mTorr was the optimum etching condition as shown in Fig. 2(a).

• Journal of the Korean Geotechnical Society
• /
• v.25 no.2
• /
• pp.55-66
• /
• 2009

At the mudstone slope located on the roadside of the Seokri area in Donghae-myeon, Pohang, Gyeongsangbuk-do, this study was performed to analyze the effects of rainfall on the stability of slope through seepage analysis according to the precipitation type of the mudstone slope, referring to the actual case of slope failure. For this, precise geological survey, geophysical exploration and drilling survey for the slope where the failure occurred were performed and followed by analysis of detailed soil layer. For the section where failure surface located, the durability reduction of rocks was measured through slaking/swelling tests and the permeability was measured through in-situ permeability tests for each soil layer. In addition, the change of strength parameter and process of instability were analyzed by back analysis, using Talren 97 and Slope/W programs, in the slope. By applying different precipitation conditions to the geographical conditions of the slope that had actual failure records, the slope stability was analyzed by seepage analysis according to duration of rainfall and rise of groundwater level resulting from the flow of rainfall caused by development of geological structures and the slope surface condition.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.4
• /
• pp.302-307
• /
• 2001

The underwater background noise measured in Geoje and Tongyoung diving fishing ground from May to December, 2000 and analyzed to get optimum carrier frequency and transmitter power level for underwater wireless telephone design. The results obtained are summarized as follows: 1. At the Geoje and Tongyoung diving fishing ground, the lowest ambient noise band was 25~30kHz with 57dB and 52dB re 1$\mu$Pa, respectively. 2. At the Geoje and Tongyoung diving fishing ground, the lowest noise band during fishing activity was 67dB and 62dB re 1$\mu$Pa, respectively. 3. At the Geoje diving fishing ground, the noise of water jetter which is a digging machine for subbottom shells was 102dB re 1$\mu$Pa. 4. Considering the design parameters of underwater wireless telephone, it is found that the optimum carrier frequency band is around 30kHz and the transmitter source level should be at least 131dB re 1$\mu$Pa for 500m range telephone.

• Journal of Korean Medical classics
• /
• v.7
• /
• pp.198-231
• /
• 1994

Up to now, after I had examined the relation between the origin of Fung(風) and Gi(氣) and the mean of Fung in medical science, I obtained the conclusion being as follows. The first, Fung(風) means a flux of Gi(氣) and Gi shows the process by virtue of the form of Fung, namely, Fung means motion of Gi. In other words, it is flow of power. Accordingly, the process of all power can give a name Fung. The second, Samul(事物) ceaselessly interchange with the external world to sustain the existence and life of themselves. And they make a adequate confrontation against the pressure of the outside. This the motive power of life action(生命活動) is Gi and shows its the process on the strength of Fung. The third, Samul(事物) incessantly releases power which it has to the outside. Power released to the outside forms the territory of the established power in the environment of them and keep up their substance(實體) in the space time(時空). It can be name Fung because the field(場) of this power incessantly flows. The fourth, man operates life on the ground of the creation of his own vigor(生氣) for himself as the life body(生命體) of the independence and self-support. The occurence of this vigor and the adjustment process(調節作用) is supervised by Gan(肝). That is to say, Gan plays a role to regulate and manage the process of Fung or the action of vigor with Fung-Zang(風臟). The fifth, because the Gi-Gi adjustment process(氣機調節作用) of Gan is the same as the process of Fung, Fung that operates the cause of a disease is attributed to the disharmony of the process of the human body Gi-Gi. Therefore, the generating pathological change is attributed to the extraordinary of the function by the incongruity of Gi-Gi(氣機) or the disorder of the direct motion of Gi-Hyul(氣血). Because the incongruity of this Gi-Gi of the human body gives rise to the abnormal of Zung-Gi(正氣) in the human body properly cannot cope with the invasion of 'Oi-Sa(外邪). Furthermore, Fung serves as the mediation body of the invasion of other Sa-Gi(邪氣) because of its dynamics, By virtue of this reason, Fung is named the head of all disease. And because the incongruity of the Gi-Gi has each other form according to Zang-Bu(臟腑), Kyung-Lak(經絡), and a region, the symptoms of a disease appear differently in line with them as well. The sixth, Fung-byung(風病) is approximately separated Zung-Fung(中風) and Fung-byung(猍義의 風病). Zung-fung and Fung-byung is to be attributed to the major invasion of each Jung-gi and Fung-sa(正氣와 風邪). But these two kinds stir up the problem to the direct motion of Gi-hyul(氣血) and the harmony of Gi-Gi in the human body. When one cures it, therefore, Zung-fung has to rectify Gi-Gi and the circulation of Gi-hyul on the basis of the supplement of Jung-gi(正氣) and Fung-byung must make the harmony of Gi-Gi with the Gu-fung(驅風). -Go-gi(調氣), Sun-Gi(順氣). Hang-Gi(行氣) - All existing living things as well as man maintain life on the ground of the pertinent harmony between the soul(精神) and the body(肉體). As soon as the harmony falls down, simultaneously life disappears as well. And Fung which means the outside process between Gi(氣) and Gi(氣) makes the action of their life cooperative and unified, Accordingy, the understanding of Fung, first, has to start wi th the whole thought that not only all Samul(事物) but also the soul and the body are one.